|
|
CONSTRUCTIVE - TECHNOLOGICAL PROJECT OF BUILDING POLYFUNCTIONAL HOUSE IN OPUSTENA STREET, BRNO
Dražilová, Michaela ; Šlanhof, Jiří (referee) ; Mohapl, Martin (advisor)
Project of master thesis solves brand new residential polyfunctional house with bike shop. The main object is a four-storyed, designed as a monolithic skeleton construction. The building is located in Opuštěná Street, Brno. The project is developed on the basis of project documentation and technical data, delivered by the designer in the behalf of investor requirements. Main goal of this project seeks to approach to real solution of the construction site. It is very important to compare also financial aspects, not only the technological. Last but not least, time requirements of construction plan and factual requirements of the customer. Constructive-technological project contains especially: technical report, site facilities, technologic regulation, schedule, financial budget, control and test plan, design of machinery, safety and health protection etc.
|
|
|
House of Furniture in Trenčín
Meliš, Lenka ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The diploma thesis deals with project design documentation of House of Furniture in Trenčín. The object is designed as a two floor buildings with basement below grand level. Object´s ground plan is rectangular shaped. First floor contains a lobby and open store space. Second floor is meant predominantly for an administrative purposes. Underground garage is designed in basement. Construction system is monolithic skeletal structure with transverse dies and stiffening core. In the middle of object is designed open atrium with vegetation surface. Atrium goes through both of above- ground floors. Object is covered by a flat roof.
|
|
|
Administrative building
Adámek, Lukáš ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The thesis deals with design of new administrative building, which supposed to serve as headquarters of midsize company with approximately 100 employees. Concept of the building with two overground floors and basement would meet requirements of growing corporate structure, company representation and modern working environment. Rectangular shape of the building allows future dispositional reconstruction and modernization. This layout allows to simplify solution of technical equipment. On the first floor of 870 square meters is facility for employees and clients located including technical background of the building as well. The underground floor is designed as storage, technical background and civil protection shelter. On the second floor are employees and management´s space located. The structural system of the building is composed of reinforced concrete skeletal structure casted in situ. Cladding of the underground section is designed as monolithic concrete walls. Upper part cladding is designed as ceramic masonry walls. The building facade is a combination of smooth aluminium panels, aluminium windows and glass facade with transparent and opaque parts. The main carousel entry is located in the glass facade part.
|
|
|
Reinforced concrete structure warehouse
Vašina, Michal ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
Bachelor´s thesis deals with structural design and assessment of most loaded parts of cast-in-place concrete frame warehouse structure. Selected parts of structure are floor structures above first storey, more precisely joist slab and primary beam, which is part of inner main frame, also inner column and foundation pad under the designed column. Structural analysis was provided by computational software IDEA StatiCa, eventual results check is done by simplified hand calculation. Last part of thesis is formwork drawing designed parts of structure and reinforcement drawing of selected elements. The structure was assessed according to the ultimate limit states (ULS) and seviceability limit states (SLS). Assessment was provided according to valid standards.
|
|
|
Reinforced concrete structure warehouse
Vašina, Michal ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
Bachelor´s thesis deals with structural design and assessment of most loaded parts of cast-in-place concrete frame warehouse structure. Selected parts of structure are floor structures above first storey, more precisely joist slab and primary beam, which is part of inner main frame, also inner column and foundation pad under the designed column. Structural analysis was provided by computational software IDEA StatiCa, eventual results check is done by simplified hand calculation. Last part of thesis is formwork drawing designed parts of structure and reinforcement drawing of selected elements. The structure was assessed according to the ultimate limit states (ULS) and seviceability limit states (SLS). Assessment was provided according to valid standards.
|
|
|
House of Furniture in Trenčín
Meliš, Lenka ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The diploma thesis deals with project design documentation of House of Furniture in Trenčín. The object is designed as a two floor buildings with basement below grand level. Object´s ground plan is rectangular shaped. First floor contains a lobby and open store space. Second floor is meant predominantly for an administrative purposes. Underground garage is designed in basement. Construction system is monolithic skeletal structure with transverse dies and stiffening core. In the middle of object is designed open atrium with vegetation surface. Atrium goes through both of above- ground floors. Object is covered by a flat roof.
|
|
|
Administrative building
Adámek, Lukáš ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The thesis deals with design of new administrative building, which supposed to serve as headquarters of midsize company with approximately 100 employees. Concept of the building with two overground floors and basement would meet requirements of growing corporate structure, company representation and modern working environment. Rectangular shape of the building allows future dispositional reconstruction and modernization. This layout allows to simplify solution of technical equipment. On the first floor of 870 square meters is facility for employees and clients located including technical background of the building as well. The underground floor is designed as storage, technical background and civil protection shelter. On the second floor are employees and management´s space located. The structural system of the building is composed of reinforced concrete skeletal structure casted in situ. Cladding of the underground section is designed as monolithic concrete walls. Upper part cladding is designed as ceramic masonry walls. The building facade is a combination of smooth aluminium panels, aluminium windows and glass facade with transparent and opaque parts. The main carousel entry is located in the glass facade part.
|
|
|
CONSTRUCTIVE - TECHNOLOGICAL PROJECT OF BUILDING POLYFUNCTIONAL HOUSE IN OPUSTENA STREET, BRNO
Dražilová, Michaela ; Šlanhof, Jiří (referee) ; Mohapl, Martin (advisor)
Project of master thesis solves brand new residential polyfunctional house with bike shop. The main object is a four-storyed, designed as a monolithic skeleton construction. The building is located in Opuštěná Street, Brno. The project is developed on the basis of project documentation and technical data, delivered by the designer in the behalf of investor requirements. Main goal of this project seeks to approach to real solution of the construction site. It is very important to compare also financial aspects, not only the technological. Last but not least, time requirements of construction plan and factual requirements of the customer. Constructive-technological project contains especially: technical report, site facilities, technologic regulation, schedule, financial budget, control and test plan, design of machinery, safety and health protection etc.
|
guest ::
