National Repository of Grey Literature 254 records found  previous11 - 20nextend  jump to record: Search took 0.03 seconds. 
Is the Language of Science/Technology Manipulative?
Plichta, Lukáš ; Smutný, Milan (referee) ; Walek, Agata (advisor)
Tato bakalářská práce se zaměřuje na problematiku manipulativnosti jazyka v politickém diskurzu. Politické projevy této doby se často věnují velkému množství společenských problémů a mohou být manipulativní. Záměrem této práce je tedy zkoumat důležitost kontroly veřejného diskurzu, který je nezbytný pro reprodukci manipulace v politice. Dále se tato práce zaměřuje na odhalení cílů a prostředků manipulace. Analýza manipulativních strategií Donalda Trumpa v páté kapitole slouží jako nástroj pro úspěšnou identifikaci manipulace. Hlavním cílem této práce je zjistit, zda je jazyk politiky manipulativní a jak se taková manipulace projevuje.
Design of end effector for a robotic cell
Machala, Lukáš ; Pavlík, Jan (referee) ; Tůma, Zdeněk (advisor)
This Master´s thesis deals with the design of end effectors for object manipulation within robotic cell located at the Department of Production Machines, Systems and Robotics, Brno University of Technology. The theoretical part of the work is devoted to a summary of the current state of knowledge in the field of end effectors. The practical part deals with draft of several variants of the solution, from which is chosen optimal variant by the method of multicriteria analysis, after which follows the construction of individual end effectors. The work includes individual 3D models of these end effectors and a rack for their storage, the work also includes assembly and part drawings. The work ends with an economic evaluation, discussion of achieved results and a conclusion.
Analysis and Evaluation of Risks in Storage Facilities of a Brewery
Hlaváčková, Andrea ; Procházková, Danuše (referee) ; Urbánek, Michal (advisor)
The diploma thesis deals with the issue of risk management in storage facilities of a brewery. The objective of the thesis was to identify and evaluate possible risks connected to the storage of handling units, which are part of the working environment in the brewery. The evaluation of the risk analysis has been created on the basis of FMEA and FTA methods. To minimize the risks, the measures were subsequently proposed to reduce potential risks when working in the warehouse which led to accident reduction. Then these measures were financially evaluated and assessed for their cost-effectiveness.
Proposal warehouse in engineering company
Švec, Michal ; Dvořák, Milan (referee) ; Štroner, Marek (advisor)
The aim of this thesis is a suggestion of warehouse in engineering factory that occures with processing of metal plates. First part of thesis is focused to studies about storage of the goods, logistic technology and to manipulation and ways how to storage metal plates. The second part contains of suggestion of storage in given conditions, technological evaluation of suggested variants and economical studies of payback period of investition to crane technology. The suggestion of the storage is completed with drawing documentation three variants of solutions.
The Study of the Manufacturing Process with a View to Change the Layout
Tylich, Zbyněk ; Jedlitschka, Aleš (referee) ; Jurová, Marie (advisor)
This thesis focuses on design a new layout of production hall in engineering company PSP Pohony Inc. The company is engaged in manufacturing od industrial gearboxes, clutch and brakes. Based on the analysis of material flow values and spaghetti diagram of current status of the company, is designed a new structure of individual workplaces so as to optimalization material flow in manufacturing and to reduction production time.
Proposal end effector for industrial robot
Dvorník, Jan ; Merenus, Ondřej (referee) ; Budík, Tomáš (advisor)
This bachelor´s thesis deals with the distribution of end effectors used in industrial robotics. The first part describes the basic types of industrial robots. Further deals with division and description types of end effectors. Subsequently, it describes the proces of design and selection of the gripper module. The last part includes connectivity solutions for robot grippers, a proposal power, control and calculation gripping forces.
Travelling and lifting mechanism
Husák, Adam ; Šťastný, Antonín (referee) ; Malášek, Jiří (advisor)
This bachelor´s thesis is aimed on traveling and lifting device designed for transportation of BELL helicopters between tarmac and hangar. The first part is devoted to review and evaluation general producers of similar devices. Furthermore there are analysis of possible mechanisms and subsequent choice of appropriate solution. The second part deals with design solution and calculations. Includes drawing of designed device. This device is defined by load capacity up to 2000 kg and stroke 80 mm.
Proposal for a new spare parts storage depot at OKD company
Adamiec, Radek ; Dvořák, Jaromír (referee) ; Kubík, Roman (advisor)
The goal of this thesis is to propose a new warehouse of spare parts. The first part describes the theoretical analysis of mentioned problems. This is followed by an analysis of the current situation in the company warehouse and analysis of information storage system SAP. The main part consists of determining the inventory, location of warehouse, storage equipment choice and a draft layout. Based on an evaluation by selected criteria was identified advantageous variant. The conclusion is devoted to the economic evaluation of the implementation of the warehouse of spare parts.
Válka Winery Nosislav
Radchenko, Mark ; Myslín,, Jiří (referee) ; Boleslavská, Yvona (advisor) ; Kalousek, Miloš (advisor)
On a basis of my project of the second year of bachelor's study on the Faculty of Civil Engineering the following bachelor's thesis is prepared, which goes on to the Documentation for Building Permit and Documentation for Construction. The theme of the work is Family Winery Válka in the village of Nosislav. The bachelor's thesis is the Family Winery Válka. The basic idea of my project was to create a modern wine-making complex and a guest house for people who decided to visit the winery for wine degustation. There were designed objects for production, sales and housing. The Family Winery includes a winemaker's house, a bouquets store, a large warehouse, expedition warehouse, a refuelling hall, a pressing hall, several sheds for storing devices and tractor parking, a house 153 with a brigadier's dressing room, administration and grandmother's apartment. A guest house is situated on a separate land over Masarykova street. The production complex includes warehouses, tank room and pressing machines room. Its structure is made up of steel elements: pillars, beams and trusses. Facades of production buildings are made of wooden cladding and black interlocking metal cladding panels. The buildings have a gable type and shed type of roofs. Other objects have a brick system. The restaurant building is located on the southwest side of the property, has a rectangular ground plan and two above-ground floors. 1st floor is partially embedded into the ground. At the top of the land, there are a number of three residential buildings that constitute a guest house. Each object is more than half a meter above it. In this way they characterize the complicated nature of the land. Objects have a rectangular ground plan, above the entrances there are raised black steel awnings. The roofs of all the buildings are gable and made of black interlocking metal cladding panels, including one of the facades. Other facades are made of wooden cladding.
Visible
Pavelková, Martina ; Kunze, Jan (referee) ; Klodová, Lenka (advisor)
The moving installation Visible is composed of parts of the classical painting, wooden slats and canvas. It represents the inner walls 8 anonymous portraits of dead children. They represent cruel and incomprehensible pain that a one can commit. Rotating an object is inspired by children's toys, children's carousel and its symbolism and design solutions to commemorate military mobile tent. Object carousel has an octahedral shape with a roof, levitates in the air space, not touching the ground and without a defined border.

National Repository of Grey Literature : 254 records found   previous11 - 20nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.