|
|
Development of a Fluid Curtain for Gaseous Exhalations Absorption
Krištof, Ondřej ; Fekete, Roman (referee) ; Lapčík,, Lubomír (referee) ; Svěrák, Tomáš (advisor)
The dissertation thesis deals with the application of absorption methods for the separation of gaseous pollutants from polluted gaseous mixtures using a pilot plant scrubber. The efficiency of the gaseous pollutant removal was determined based on the hydrodynamic distribution of fluids inside the spray chamber. A TF-28 150 spiral nozzle, which was used to spray the absorption liquid, was experimentally characterized. Specifically, the pressure impact pattern of the liquid produced by the nozzle was investigated using intrusive methods and the effective spray angles, the modes of primary and secondary atomization, the droplet size and liquid velocity distributions were determined using non-intrusive optical methods. Numerical simulations of flow of model gas phase inside the sprinkler head and spraying of the liquid through the spiral nozzle were also carried out. The obtained data can be applied to estimate the interface area and together with the determination of the coefficient of total mass transfer thus define the kinetics of chemisorption for a given absorbent/absorbate combination.
|
|
|
Combustion of renewable liquid fuels
Nejezchleb, Radek ; Skryja, Pavel (referee) ; Kermes, Vít (advisor)
This thesis is concerned with combustion of liquid biofuels, and possibility of using liquid biofuels for lower heat output power units. Overview of basic usable liquid biofuels in Czech Republic is executed in the beginning of the thesis. This part is focused especially on production method and energy effectivity of rape-oil methyl ester (RME) and bioethanol production. Overview of basic atomization method of liquid fuels is executed in next chapters. The focus is stressed on pneumatic atomization, especially effervescent atomization method, which was used in practical experiment. Practical part contains fossil fuel and selected biofuel (RME) combustion test executed on burner testing device. Basic combustion properties was found and test plan was made before executing the test. Various operating conditions are compared in terms of atomization quality, combustion quality and geometrical characteristics of flame. Usability of tested liquid biofuels for lower heat output power units is evaluated in the conclusion.
|
|
|
Testing of liquid fuels atomizers
Suchánek, Petr ; Skryja, Pavel (referee) ; Kermes, Vít (advisor)
This thesis is dealing with testing of two atomizers in combustion of liquid fuels and natural gas. There is a simple analysis of problems, principles and methods of atomizing liquids executed. Problem of pneumatic atomizing liquids is also described in detail. In the next chapters there is a plan and running of testing processed. Overall behavior of the atomizers and flame is evaluated from the outcome measurement and the power characteristics of atomizers and influence of GLR on the quality of combustion are determined. Overall rating of the testing is presented in conclusion this thesis.
|
|
|
Development of a Fluid Curtain for Gaseous Exhalations Absorption
Krištof, Ondřej ; Fekete, Roman (referee) ; Lapčík,, Lubomír (referee) ; Svěrák, Tomáš (advisor)
The dissertation thesis deals with the application of absorption methods for the separation of gaseous pollutants from polluted gaseous mixtures using a pilot plant scrubber. The efficiency of the gaseous pollutant removal was determined based on the hydrodynamic distribution of fluids inside the spray chamber. A TF-28 150 spiral nozzle, which was used to spray the absorption liquid, was experimentally characterized. Specifically, the pressure impact pattern of the liquid produced by the nozzle was investigated using intrusive methods and the effective spray angles, the modes of primary and secondary atomization, the droplet size and liquid velocity distributions were determined using non-intrusive optical methods. Numerical simulations of flow of model gas phase inside the sprinkler head and spraying of the liquid through the spiral nozzle were also carried out. The obtained data can be applied to estimate the interface area and together with the determination of the coefficient of total mass transfer thus define the kinetics of chemisorption for a given absorbent/absorbate combination.
|
|
|
Combustion of renewable liquid fuels
Nejezchleb, Radek ; Skryja, Pavel (referee) ; Kermes, Vít (advisor)
This thesis is concerned with combustion of liquid biofuels, and possibility of using liquid biofuels for lower heat output power units. Overview of basic usable liquid biofuels in Czech Republic is executed in the beginning of the thesis. This part is focused especially on production method and energy effectivity of rape-oil methyl ester (RME) and bioethanol production. Overview of basic atomization method of liquid fuels is executed in next chapters. The focus is stressed on pneumatic atomization, especially effervescent atomization method, which was used in practical experiment. Practical part contains fossil fuel and selected biofuel (RME) combustion test executed on burner testing device. Basic combustion properties was found and test plan was made before executing the test. Various operating conditions are compared in terms of atomization quality, combustion quality and geometrical characteristics of flame. Usability of tested liquid biofuels for lower heat output power units is evaluated in the conclusion.
|
|
|
Testing of liquid fuels atomizers
Suchánek, Petr ; Skryja, Pavel (referee) ; Kermes, Vít (advisor)
This thesis is dealing with testing of two atomizers in combustion of liquid fuels and natural gas. There is a simple analysis of problems, principles and methods of atomizing liquids executed. Problem of pneumatic atomizing liquids is also described in detail. In the next chapters there is a plan and running of testing processed. Overall behavior of the atomizers and flame is evaluated from the outcome measurement and the power characteristics of atomizers and influence of GLR on the quality of combustion are determined. Overall rating of the testing is presented in conclusion this thesis.
|
guest ::
