|
|
Additional reinforcement of wood elements
Janoušek, Radek ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals with the possibilities of additional reinforcement of wooden elements using different types of BFRP materials. In the practical part, an experiment of reinforcing plywood with external reinforcement using BFRP fabrics with different basis weights was performed. As part of the strength tests performed, the specimens were subjected to bending and shear stresses. To verify the bonding quality of the plywood, the bodies were exposed to the effect of elevated temperature and a delamination test was performed to determine the bonding quality of the plywood joints. The achieved values were evaluated and compared with the available literature.
|
|
|
Study of durability of wood glue bonds against increased temperature
Kučera, Vít ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
In this time are for design of wooden elements available simplified procedures for fire modeling which defines ČSN EN 1991-1-2. But it is not experimentally tested the impact of adhesive on the final value of fire resistance of laminated panels. This diploma thesis solves basic normative practices that could explain the durability of glue bond against increased temperatures. in the practical part will be undertaken to experimentally assess the impact of various kinds of adhesive-based (epoxy, formaldehyde, PUR and EPI) on the glued bond durability against increased temperature. Glued joints that will be subjected to gradual temperature exposure in order to assemble the dependence of the temperature influence on the final strength of the joint according to the type of adhesive.
|
|
|
Development of wood-based board materials applying thermal modification process
Buriánek, Vlastimil ; Pipíška,, Tomáš (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals deals with the effectiveness of polyurethane and phenol-resorcinol-formaldehyde adhesives when applied in bonded joints of thermally treated sheet materials. The thermal resistance of commercially used adhesives was analysed as part of a research activity. Furthermore, the changes in the properties of wood materials after heat treatment were described. In the practical part, the effectiveness of the used adhesives on densified birch plywood was verified with respect to the shear strength of the resulting composite. Based on the results obtained, it was proceeded to verify the effectiveness of densification on spruce plywood.
|
|
|
Utilization of accelerated durability test of wood glued joints for consequent service-life prediction
Šmíra, David ; Tupý, Michael (referee) ; Vaněrek, Jan (advisor)
The aim of my diploma thesis are methods which are able to describe durability aspects of glued wooden joints. The main objective are methods which primarily includes hygrothermal stress acting in the glued joint of wooden adherend and determine the service life of the specific glued joint by modelling based on Arrhenius relation and the other methods. Other part of this work is aimed to shear tests of the samples exposed to different thermal and humidity conditions and for individual sets of exposures determining the glue penetration depth into the wooden adherend by EPI fluorescent analysis. These analytic methods are used for quality check of the glued joints, which are mostly based on strength, chemical or structural parameters of the tested sample.
|
|
|
Additional reinforcement of wood elements
Janoušek, Radek ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
This diploma thesis deals with the possibilities of additional reinforcement of wooden elements using different types of BFRP materials. In the practical part, an experiment of reinforcing plywood with external reinforcement using BFRP fabrics with different basis weights was performed. As part of the strength tests performed, the specimens were subjected to bending and shear stresses. To verify the bonding quality of the plywood, the bodies were exposed to the effect of elevated temperature and a delamination test was performed to determine the bonding quality of the plywood joints. The achieved values were evaluated and compared with the available literature.
|
|
|
Study of durability of wood glue bonds against increased temperature
Kučera, Vít ; Vejpustek,, Zdeněk (referee) ; Vaněrek, Jan (advisor)
In this time are for design of wooden elements available simplified procedures for fire modeling which defines ČSN EN 1991-1-2. But it is not experimentally tested the impact of adhesive on the final value of fire resistance of laminated panels. This diploma thesis solves basic normative practices that could explain the durability of glue bond against increased temperatures. in the practical part will be undertaken to experimentally assess the impact of various kinds of adhesive-based (epoxy, formaldehyde, PUR and EPI) on the glued bond durability against increased temperature. Glued joints that will be subjected to gradual temperature exposure in order to assemble the dependence of the temperature influence on the final strength of the joint according to the type of adhesive.
|
|
|
Utilization of accelerated durability test of wood glued joints for consequent service-life prediction
Šmíra, David ; Tupý, Michael (referee) ; Vaněrek, Jan (advisor)
The aim of my diploma thesis are methods which are able to describe durability aspects of glued wooden joints. The main objective are methods which primarily includes hygrothermal stress acting in the glued joint of wooden adherend and determine the service life of the specific glued joint by modelling based on Arrhenius relation and the other methods. Other part of this work is aimed to shear tests of the samples exposed to different thermal and humidity conditions and for individual sets of exposures determining the glue penetration depth into the wooden adherend by EPI fluorescent analysis. These analytic methods are used for quality check of the glued joints, which are mostly based on strength, chemical or structural parameters of the tested sample.
|
guest ::
