|
|
Fire Station Type C2
Wojcik, Jindřich ; Dohnal, Jakub (referee) ; Fuciman, Ondřej (advisor)
Diplom thesis is about design of the fire station of type C2 for the HZS. The building is divided into two parts. First part of a building is designed as a rectangular recessed floor. The first part of building consists of two floors and one underground floor. Roofed by a single-layer flat roof of soft PVC. The building will be used to perform the services, the fire brigade. It will be used 24 hours a day. In the basement is located warehouse, HVAC room, utility room and a lounge with an alternative source of electricity. On the first floor are designed garages for storage technique and also the dressing room, workroom, washing box, warehouse, room for chemical-technical service and concierge. The second floor is designed to serve firefighters. The second part of the building is a training tower, which will be used to train firefighters and for drying hoses. The training tower is designed as a simple steel structure with four floors. The project was developed in the educational version of ArchiCAD 16th project is designed in accordance with the requirements of a layout, architectural design, structural design proper and safe use of the building.
|
|
|
Apartment House
Němec, Nikola ; Karlík, Štěpán (referee) ; Lavický, Miloš (advisor)
This bachelor’s thesis solves a project documentation of Apartment House and contains appurtenances according to valid regulations. The house is designed as a detached house, without basement. It has a non-standard size and is covered with a flat vegetation roof. The house has five floors with balconies. The house has 12 dwelling units. On the first floor is accessory apartments: bicycle and pram room, utility room, utility room and cellar rooms. In the house is designed a elevator. The house is made of precast concrete frame and infill wall with a contact thermal insulation system.
|
|
|
Parish church, Brno - Líšeň
Jurák, Vítězslav ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
This diploma thesis, called „Parish church, Brno-Líšeň“, is compiled as documentation for building construction. There is one complex building situated in slope. Therefore it consists of one partly underground floor and first floor. It is divided into three sections. Central part is designed as round-shaped body of the church with tower in the southern part of the church. Shed roof has an angle of 7° for body and an angle of 13° for tower. From the western side there is an administrative area connected to the church and from eastern side there is a community area which is supposed to be used as residential premises. Roof of both these parts is constructed as flat vegetative roof. Structural design is systemic, Velox. Foundation construction combines concrete and ferro-concrete belts and footing.
|
|
|
Retirement center in Velké Poříčí
Vondrová, Michaela ; Herman, Adolf (referee) ; Bantová, Sylva (advisor)
It is about new-built Retirement center standing alone in the cadaster unit of the town Velké Poříčí. The building has four- floors without basement. It is located in flat terrain near the river in quiet location. The house is built as letter L form. The Retirement center is adapt for disabled people. In the first floor is dining room, doctor´s office, part for employees and technical facilities for house. In the second and third floors are apartments. There are 12 single rooms for one person, 6 single rooms for pair with sleeping in one room and 4 apartments for couple with separated bedroom. In the fourth floor is access to roof terrace. The structural systém of the building is composed of precast concrete frame by Prefa, infill wall from ceramic masonry. Vertical structures are built by prestressed concrete floor slab Spiroll. The building has ventilated facade with mineral wool with facade cladding. The roof is warm flat roof with half intensive green roof.
|
|
|
Office building in Karvina
Bogocz, Adam ; Dohnal, Jakub (referee) ; Fuciman, Ondřej (advisor)
Diplom thesis is about design of an office building. Building floor plan is designed as a rectangle. The building consists of four floors. Roofing the object is solved by a flat roof with strips of m-PVC. The purpose of the internal arrangement is to be able to lease office space to individual firms on the floor. On the first floor is situated an entrance hall with space for the doorman and staircase area. At the hall is also a personal elevator and utility room. These spaces are common to all tenants. In the space for offices are located toilets for women, for men and one toilet for the disabled. Kitchen with lounge and six offices. These spaces are connected with single corridor. The other floors are connected to administrative with hall, which houses a staircase and an elevator. In office spaces 2.NP. 3.NP and 4.NP are located toilets for women, for men and one toilet for the disabled. Kitchen with lounge, utility room and nine offices. These spaces are connected with single corridor. From these levels, there is also access to the evacuation staircase, which is designed according to the requirements for fire protection. On the 4.NP in the utility room is located auditing roof ascent. The project was developed in the educational version of ArchiCAD 17 and processed in accordance with the requirements of a layout, architectural design, structural design, proper and safe use of the building.
|
|
|
The Social House
Bíza, Petr ; Šobrová, Zdena (referee) ; Utíkalová, Ivana (advisor)
The diploma thesis focuses on project of new building of social house in Mutěnice in Hodonín district in South Moravian region. The project is in accordance with official assignment and with contemporary Czech standards and legislation. The building is placed in inner part of the town close to the town centre. It’s designed on an empty plot owned by town. Object should serve to the town citizens as cultural and social meeting point. The building plan is irregullarly-shaped with maximum dimensions 29,5 X 52,0 m and has two floors. Inside the social house there is a dance hall, restastaurant with kitchen and rooms for cultural and social activities of citizens of Mutěnice. Structural system can be divided into two parts. The part of the building with dance hall consists of feinforced concrete frames combined with infill masonry walls. The other part with restaurant and other rooms is made of masonry walls. The foundations of the building are made of concrete strip foundations and reinforced concrete square footings with grade beams. Bearing walls are made of sand-lime blocks KM Beta. Ceilings are made of prestressed concrete floor slabs Spiroll. Partition walls consist of plasterboard panels. The building is roofed by flat extensive green roof. All external walls are insulated with mineral wool. Doors and windows have wooden frames and triple glazing. As result there’s structurally, operationally and aesthetically functional complex, that will be benefit for the town and its citizens, especially for their cultural and social life.
|
|
|
The Multipurpose Building in Opava
Gross, Petr ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The subject of this diploma thesis is the processing of design documentation for realization of the new-build multipurpose building in Opava. The building is designed on the grounds of a former dairy in the Krnovská street where the demolition of obsolete buildings passed off recently. Now are these areas designed to build up again. Designed object will function as a multipurpose building with the operation of a restaurant on the 1st floor, office spaces on the 2nd floor and dwelling units on the 3rd floor. Part of the first floor is a mass garage primarily intended for residents of dwelling units with a total of 9 parking places. It is designed eight dwelling units in total of which six are one-room flats and two are four-room flats. Plan shape of the building is rectangular. The londbearing structure of the building is a reinforced concrete prefabricated precast concrete frame founded on cast-in-place concreted pads. Infill walls are clay brick. The building is roofed with warm flat roof. Dominant features of the building are large glass areas in all floors, metal ventilated facade and loggias of dwelling units. The drawings are processed in AutoCAD programme.
|
|
|
Retirement center in Velké Poříčí
Vondrová, Michaela ; Herman, Adolf (referee) ; Bantová, Sylva (advisor)
It is about new-built Retirement center standing alone in the cadaster unit of the town Velké Poříčí. The building has four- floors without basement. It is located in flat terrain near the river in quiet location. The house is built as letter L form. The Retirement center is adapt for disabled people. In the first floor is dining room, doctor´s office, part for employees and technical facilities for house. In the second and third floors are apartments. There are 12 single rooms for one person, 6 single rooms for pair with sleeping in one room and 4 apartments for couple with separated bedroom. In the fourth floor is access to roof terrace. The structural systém of the building is composed of precast concrete frame by Prefa, infill wall from ceramic masonry. Vertical structures are built by prestressed concrete floor slab Spiroll. The building has ventilated facade with mineral wool with facade cladding. The roof is warm flat roof with half intensive green roof.
|
|
|
The Multipurpose Building in Opava
Gross, Petr ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The subject of this diploma thesis is the processing of design documentation for realization of the new-build multipurpose building in Opava. The building is designed on the grounds of a former dairy in the Krnovská street where the demolition of obsolete buildings passed off recently. Now are these areas designed to build up again. Designed object will function as a multipurpose building with the operation of a restaurant on the 1st floor, office spaces on the 2nd floor and dwelling units on the 3rd floor. Part of the first floor is a mass garage primarily intended for residents of dwelling units with a total of 9 parking places. It is designed eight dwelling units in total of which six are one-room flats and two are four-room flats. Plan shape of the building is rectangular. The londbearing structure of the building is a reinforced concrete prefabricated precast concrete frame founded on cast-in-place concreted pads. Infill walls are clay brick. The building is roofed with warm flat roof. Dominant features of the building are large glass areas in all floors, metal ventilated facade and loggias of dwelling units. The drawings are processed in AutoCAD programme.
|
|
|
Office building in Karvina
Bogocz, Adam ; Dohnal, Jakub (referee) ; Fuciman, Ondřej (advisor)
Diplom thesis is about design of an office building. Building floor plan is designed as a rectangle. The building consists of four floors. Roofing the object is solved by a flat roof with strips of m-PVC. The purpose of the internal arrangement is to be able to lease office space to individual firms on the floor. On the first floor is situated an entrance hall with space for the doorman and staircase area. At the hall is also a personal elevator and utility room. These spaces are common to all tenants. In the space for offices are located toilets for women, for men and one toilet for the disabled. Kitchen with lounge and six offices. These spaces are connected with single corridor. The other floors are connected to administrative with hall, which houses a staircase and an elevator. In office spaces 2.NP. 3.NP and 4.NP are located toilets for women, for men and one toilet for the disabled. Kitchen with lounge, utility room and nine offices. These spaces are connected with single corridor. From these levels, there is also access to the evacuation staircase, which is designed according to the requirements for fire protection. On the 4.NP in the utility room is located auditing roof ascent. The project was developed in the educational version of ArchiCAD 17 and processed in accordance with the requirements of a layout, architectural design, structural design, proper and safe use of the building.
|
guest ::
