|
|
Personal exposure to PM10 of selected workplaces in a coal strip mine determined by experiment
Basslerová, Barbora ; Hovorka, Jan (advisor) ; Hůnová, Iva (referee)
This thesis compares the experimentally determinated values of PM1, PM2,5, respirable fraction and PM10 between the cab drivers and the outdoor walkway of the bucket wheel excavator in the brown coal strip mine Doly Nástup Tušimice between March 16 and March 23, 2015. For the measurement of individual fractions, portable laser nephelometers were used. Superiority of coarse aerosol was confirmed outside from the total measurement time accounted for 82 %. PM10 fraction predominated outside and changed throughout the day depending on the activity carried out by a worker. Regular cleaning by sweeping stretches of dunes had an impact on PM10 concentrations. Fluctuations in the concentration of PM1 were detected in the driver cab due to smokers stay at this workplace. For these reasons there is a concentration difference between work shifts. Air temperature and relative humidity were also monitored in both types of work places. The air temperature average values reached over the range recommended for the optimal working environment in the driver cab. The thesis finds out personal exposure of a bucket-wheel excavator driver which is below the limit for the total concentration. Smaller fractions appears to be a potentially health risk. Powered by TCPDF (www.tcpdf.org)
|
|
|
Atmospheric aerosol vertical distribution in boudary layer
Dočekalová, Veronika ; Hovorka, Jan (advisor) ; Jančík, Petr (referee)
Particulate matter (PM) air pollution is one of the most important topics in the field of environmental protection, and coal strip mining is a significant source of coarse atmospheric aerosol. In order to implement appropriate regulations to improve air quality, we need to identify the major sources of pollution. PM is usually measured in a ground-based manner and its dispersion is only modelled. Therefore, the objective of this study was to measure concentrations of coarse aerosol in the atmospheric boundary layer above the area of the coal strip mine through experimental airborne measurements and to estimate pollution contribution of mining to the surroundings. Measurements were carried out from November 11 to November 26, 2012, at Vršany coal mine, Czech Republic. An electrically powered airship was used with a specially designed gondola carrying aerosol monitors DustTrak DRX and P-Trak. Temperature and relative humidity data were also recorded. Repeated flights were performed at several heights above mine edge level. PM1-10 and GPS data were recorded every second. Average airship velocity ranged from 6 to 7 ms-1 . Flight measurements were also compared to ground-based measurements of PM10 and meteorological data. Weather during our measurements was characterised by low temperatures, high relative...
|
|
|
Size segregated atmospheric aerosol in selected workspaces of coal strip mine
Basslerová, Barbora ; Hovorka, Jan (advisor) ; Svoboda, Petr (referee)
The workers are exposed to aerosol particles in a coal strip mine. These particles are usually generated by the Bucket-wheel excavators which break the mined rock. The goal of the thesis thesis was to compare the concentrations of atmospheric aerosol particles - PM on the Bucket-wheel excavator Schrs 1320, the Stacker ZPDH 6300 and the Bucket- wheel excavator K 800/N2 in the coal quarry Doly Nástup Tušimice, and then to answer the questions what is the main cause of increased concentration PMx and whether the mining machines are different from each other. The measurement was realized stepwise on every mining machine in the time period from 12. 8. to 2. 9. 2016. The concentrations of PM1, PM2,5 and PM10 were measured by two portable laser nephelometers in the cab drivers and the outdoor walkway of the mining machines with the integration time of 1 minute. The air temperature and the relative humidity were monitored in both types of settings in every five minutes. The PMx concentrations variability is usually determined by the type of work and by the type of smoking. Consequently, PM concentrations on the mining machines were compared at the morning exchanges and evening exchanges, during the outdoor cleaning by sweeping, the indoor cleaning by hoovering and during the smoking. The highest...
|
|
|
Atmospheric aerosol vertical distribution in boudary layer
Dočekalová, Veronika ; Hovorka, Jan (advisor) ; Jančík, Petr (referee)
Particulate matter (PM) air pollution is one of the most important topics in the field of environmental protection, and coal strip mining is a significant source of coarse atmospheric aerosol. In order to implement appropriate regulations to improve air quality, we need to identify the major sources of pollution. PM is usually measured in a ground-based manner and its dispersion is only modelled. Therefore, the objective of this study was to measure concentrations of coarse aerosol in the atmospheric boundary layer above the area of the coal strip mine through experimental airborne measurements and to estimate pollution contribution of mining to the surroundings. Measurements were carried out from November 11 to November 26, 2012, at Vršany coal mine, Czech Republic. An electrically powered airship was used with a specially designed gondola carrying aerosol monitors DustTrak DRX and P-Trak. Temperature and relative humidity data were also recorded. Repeated flights were performed at several heights above mine edge level. PM1-10 and GPS data were recorded every second. Average airship velocity ranged from 6 to 7 ms-1 . Flight measurements were also compared to ground-based measurements of PM10 and meteorological data. Weather during our measurements was characterised by low temperatures, high relative...
|
|
|
Characterization of coarse atmospheric aerol in urban environment
Granici, Olga ; Zíková, Naděžda (advisor) ; Hůnová, Iva (referee)
(EN) This Diploma Thesis is concerned with statistical analysis of coarse aerosol at the area of the capital city Prague with focus on its time and space variability. The data covers time period from year 2005 up to year 2010 included. The concentrations of coarse aerosol were originally calculated from recorded values of PM10 a PM2,5. The assessment used in this thesis is based on concentrations of coarse aerosol recorded on four pollutant stations which are localized in the capital city. Three out of four those air pollution monitoring stations are characterized as traffic stations kind of purse, where we can assume the traffic's impact over the coarse aerosol concentration. The last station is distinguished to be background to report the data of region less loaded by pollution. The analysis is executed within particular parameters supposing that main source of coarse aerosol is traffic in urban environment. For time period examination variability the year, season, week and day running was carried out. The spatial variability was researched by the air pollution monitoring stations localization. To determine a rate of dependency among particular parameters the correlation analysis according to Spearman was used within the calculation of correlation coefficients. Beside the analysis this thesis...
|
|
|
Personal exposure to PM10 of selected workplaces in a coal strip mine determined by experiment
Basslerová, Barbora ; Hovorka, Jan (advisor) ; Hůnová, Iva (referee)
This thesis compares the experimentally determinated values of PM1, PM2,5, respirable fraction and PM10 between the cab drivers and the outdoor walkway of the bucket wheel excavator in the brown coal strip mine Doly Nástup Tušimice between March 16 and March 23, 2015. For the measurement of individual fractions, portable laser nephelometers were used. Superiority of coarse aerosol was confirmed outside from the total measurement time accounted for 82 %. PM10 fraction predominated outside and changed throughout the day depending on the activity carried out by a worker. Regular cleaning by sweeping stretches of dunes had an impact on PM10 concentrations. Fluctuations in the concentration of PM1 were detected in the driver cab due to smokers stay at this workplace. For these reasons there is a concentration difference between work shifts. Air temperature and relative humidity were also monitored in both types of work places. The air temperature average values reached over the range recommended for the optimal working environment in the driver cab. The thesis finds out personal exposure of a bucket-wheel excavator driver which is below the limit for the total concentration. Smaller fractions appears to be a potentially health risk. Powered by TCPDF (www.tcpdf.org)
|
guest ::
