|
|
Quality assurance of RHEL systems with a high level of security
Javorský, Lukáš ; Matěj,, Týč (referee) ; Sedlák, Petr (advisor)
Cieľom diplomovej práce je vyvinúť proces zabezpečenia kvality pre operačné systémy RHEL s vysokou úrovňou zabezpečenia. Táto práca je vedená snahou vytvoriť používateľsky prívetivé testovacie prostredie pre inžinierov kvality, ktoré im umožní jednoducho overiť funkčnosť systémových balíkov aj v prostredí zabezpečeného testovaného systému. Dosia\-hnutý výsledok bol realizovaný integráciou existujúceho softvérového portfólia spoločnosti Red Hat, konkrétne aplikáciami Image Builder a OpenSCAP, čo viedlo k vytvoreniu predpripravených zabezpečených virtuálnych strojov. Následne integrácia s aplikáciou na správu testov Testing Farm spoločnosti Red Hat slúži na zjednodušenie poskytovania cloudového virtuálneho stroja a poskytovanie zavedeného testovacieho prostredia.
|
|
|
Test benches for microcontroller kits
Žaludek, Ivo ; Burian, František (referee) ; Bradáč, Zdeněk (advisor)
This thesis deals with the design of a test bench for functional testing of educational kits. These kits are in the form of standalone printed circuit boards, for instance, a module with a microcontroller and its peripherals, such as a display, keyboard, or external memory. A comparison of commercially available testers is conducted, and the requirements for testing of each printed circuit board are identified. Based on these requirements, the design of both the hardware and the software of the test bench was developed. The final stage of the project is the evaluation of the functionality of the test bench.
|
|
|
HIL test stand for universal electronic control units
Zouhar, Štěpán ; Musil, Filip (referee) ; Brablc, Martin (advisor)
This diploma thesis is focused on testing of Electronic Control Units, especially functional testing in which hardware and software is verified and also Model in the Loop, Software in the Loop, Processor in the Loop and Hardware in the Loop testing methods. Within practical part of this thesis testing stand for functional test of the ECU was developed and manufactured. It is connected to PC via Input/Output card, testing is controlled by MATLAB script. Whole process of testing is automated from initial upload of testing firmware to tested ECU over all phases of test up to bootloader flashing. Hardware in the Loop test was also created, in which ECU works as controller and DC motor is simulated in real time with PC in MATLAB environment.
|
|
|
Automatic Testing of JavaScript Restrictor Project
Bednář, Martin ; Pluskal, Jan (referee) ; Polčák, Libor (advisor)
The aim of the thesis was to design, implement and evaluate the results of automatic tests for the JavaScript Restrictor project, which is being developed as a web browser extension. The tests are divided into three levels - unit, integration, and system. The Unit Tests verify the behavior of individual features, the Integration Tests verify the correct wrapping of browser API endpoints, and the System Tests check that the extension does not suppress the desired functionality of web pages. The System Tests are implemented for parallel execution in a distributed environment which has succeeded in achieving an almost directly proportional reduction in time with respect to the number of the tested nodes. The benefit of this work is detection of previously unknown errors in the JavaScript Restrictor extension and provision of the necessary information that allowed to fix some of the detected bugs.
|
|
|
Functional HIL testing of an electronic control unit
Štramberský, Jan ; Appel, Martin (referee) ; Brablc, Martin (advisor)
This thesis deals with the functional HIL testing of a universal electronic control unit. The control unit is graphically programmed in an application in which it is possible to create state machines with pre-programmed functions. Within the scope of this work, a HIL test of the unit has been created. Signals are exchanged between the unit and PC using an input/output card. The PC runs the HIL test script in Matlab. This test verifies the firmware of the unit by checking the expected behaviour of the functions and the conditions of the transitions.
|
|
|
Software tool for factory acceptance test
Dostál, Adam ; Blažek, Petr (referee) ; Martinásek, Zdeněk (advisor)
This work is focused on the implementation of functional tests within the software project in the field of energy in the company Unicorn. The theoretical part describes in general the project methodology of software development and the methodology Rational Unified Process (RUP). In addition, the test methods are included, and the quality management model FURPS+. The last section introduces functional tests, including a description of those that are used to test the developed application. The practical part consists of description of the energy project Nemo Link, developed application Nemo Link Dispatch System (NDS), individial application modules, test enviroment, used tools and designed test methodology. Based on this methodology, individual selected tests are performed and evaluated.
|
|
|
Testing of proportional hydraulic block characteristics
Vácha, Ondřej ; Klas, Roman (referee) ; Habán, Vladimír (advisor)
Goal of this thesis is to verify functions of hydraulic manifolds from new supplier, measure characteristics of pressure loss relative to flow rate and for proportional blocks also characteristics of flow rate relative to control voltage at constant inlet pressure. Verification will be carried out with proportional manifolds and on/off manifolds with different failure functions.
|
|
|
The frost susceptibility of the recycled materials to subgrade of the pavement
Nehybová, Eva ; Mondschein,, Petr (referee) ; Stehlík, Dušan (advisor)
In the theoretical part of the thesis, different methods of testing frost susceptibility in the Czech Republic and other countries of the European Union are compared. The practical part of the thesis deals with laboratory testing of frost susceptibility of concrete and mixed recycled materials using the direct method of frost heave tests as well as determining the California Bearing Ratio (CBR) and design module of elasticity using the cyclic triaxial test. Suitability of materials for construction of road infrastructure is then assessed on the basis of the results of these tests.
|
|
|
Testing the function of the shoulder girdle in wild water slalom, Comparison of groups with the history of shoulder girdle injuries and without injuries
Heger, Tomáš ; Kozel, Jakub (advisor) ; Šebek, Milan (referee)
BACHELOR THESIS ABSTRACT First name and surname: Tomáš Heger Supervisor: Mgr. Jakub Kozel Title of the bachelor thesis: Testing the function of the shoulder girdle in wild water slalom. Comparison of groups with the history of shoulder girdle injuries and without injuries Abstract: This bachelor thesis deals with the objective assessment of the influence of shoulder girdle injury on its functional status in wild water slalom using the UQYBT and CKUEST test. The bachelor thesis is divided into theoretical and practical parts. The theoretical part of the thesis is devoted to the shoulder gridle, its anatomy, kinesiology and the problems of its most common injuries in canoe slalom athletes together with the introduction of the basic characteristics of canoe slalom and the functional tests used in this thesis. The practical part of the thesis focuses on testing and comparison of a group of actively competing slalomers with a history of injury and a control group. A total of 14 probands participated in the testing who were divided into control and study groups. The probands in the study group had a history of shoulder injury while the control group did not. Subsequently, testing of the study and control groups was performed using the CKUEST and UQYBT test. Based on the evaluation of the results and comparison of...
|
|
|
Functional HIL testing of an electronic control unit
Štramberský, Jan ; Appel, Martin (referee) ; Brablc, Martin (advisor)
This thesis deals with the functional HIL testing of a universal electronic control unit. The control unit is graphically programmed in an application in which it is possible to create state machines with pre-programmed functions. Within the scope of this work, a HIL test of the unit has been created. Signals are exchanged between the unit and PC using an input/output card. The PC runs the HIL test script in Matlab. This test verifies the firmware of the unit by checking the expected behaviour of the functions and the conditions of the transitions.
|
guest ::
