|
|
University dormitory
Glogarová, Tereza ; Stavinohová, Jana (referee) ; Utíkalová, Ivana (advisor)
The new building of a university dormitory with workshops is the content of the presented thesis. The building consists of fifty-two beds for students’ accommodation with complete equipment in eight cells, three workshops and a technical support. This is a combination of reinforced concrete prefabricated skeleton and classical masonry building construction with insulation. The building has four floors. It is designed as seven towers with flat roofs, which protrude from a ground floor with a vegetative roof. Paved and parking areas are adjacent to the building. The project is designed into an urban area of Nový Jičín. Glass atrium and overall shape solution are the distinctive features of the proposal.
|
|
|
Residential Building
Bělíček, Radek ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The aim of the bachelor thesis is to elaborate the project documentation of residental building in the village Děrné. It is a building with three above-ground floors in which there are in total 4 apartments, one of them is accessible. The construction system is designed as masonry Porotherm system. Facade is insulated with a ventilated facade insulation system. The building is covered with a flat green roof. Part of the project documentation is also a basic assessment of the building in terms of building physics.
|
|
|
A Municipal Apartment Building
Lušovský, Lukáš ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The subject of this bachelor thesis is a new building of a four-storey non-blocked apartment building in Jeseník nad Odrou. The apartment building consists of five residential units with a garage and common rooms. The whole object is then covered with a cold roof. The main entrance to the building is located on the northeast side of the building at the 1st floor level. The main living rooms are oriented on energy-efficient sides. The vertical constructions are made mainly of Porotherm ceramic system components. Ceiling structures are designed as prefamily filigree. Stairs are monolithic reinforced concrete. The project was processed using the AutoCAD software.
|
|
|
Supporting structure of a polyfunctional house
Reinoha, David ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The subject of this master’s thesis is the design and calculation of a five-floor multifunctional building. The building consists of flats located in floors -1 to 3, the remaining underground floors serving as a car park and the second part of the building contains spaces designated for business purposes. Each of the two flats located on each floor features a balcony. The multifunctional building contains two underground floors which are designed entirely as reinforced concrete structures and three aboveground floors designed as ceramic brickwork structure. The roof of the building is flat, not designed for walking and featuring an air conditioning unit for the entire building. A review of selected loadbearing structures of component floors was performed as a part of this thesis. The main load-bearing horizontal is composed of stiff ceilings, including the bordering ceiling of the third floor and the roof. Above-ground floors are to be constructed of pre-stretched ceiling girders Spiroll which are set onto reinforcing wreaths. Underground floors are to be constructed as a monolithic structure made of ferroconcrete. The vertical structure is constructed of perforated brick blocks for above-ground floors comprising floors 1-3, remaining underground walls are constructed of monolithic ferroconcrete. Foundation constructions are made of monolithic concrete white tub including confluence and review of the tub.
|
|
|
Mixed-use Building
Vlado, Roman ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Annotation The aim of the thesis is new-building design of mixed-use building in cadastral of community Nové Mesto nad Váhom. Building is situated at free estate in the marginal of community. Building estate must have new feeder road built. In front of building will be the parking area. The mixed-use building is detached and four-storied building. At basement is situated underground garage for ten cars and store houses for flats. At first floor is situated cafe and commercial space. Cafe has kitchen, stock rooms and WC. Commercial space has staff facilities and sales area. One of the shops has back door to stock room. Parking space for staff is next to building. At second and third floor is situated eight flats. Four flats has 3 rooms and four left has 2 rooms. Each flat has got stock room, WC and bathroom. In each flat is situated entrance to the terrace. Terrace is on extensive green roof orientated to southwest. In the flats is kitchen together with living room because of bigger space. Floor in the flats is combination of ceramic tiles and laminated floor. Area with flats has a lift. Concrete foundations are on micropiles. Project is set up with system LIVETHERM building has heat cladding. At the building are plastic windows and colour is matching with facade. Foothpath around building are from interlocking pavement. Whole documentation is prepared to realization of building. Drawing documentation is prepared by software AUTOCAD.
|
|
|
Supporting structure of a polyfunctional house
Reinoha, David ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The subject of this master’s thesis is the design and calculation of a five-floor multifunctional building. The building consists of flats located in floors -1 to 3, the remaining underground floors serving as a car park and the second part of the building contains spaces designated for business purposes. Each of the two flats located on each floor features a balcony. The multifunctional building contains two underground floors which are designed entirely as reinforced concrete structures and three aboveground floors designed as ceramic brickwork structure. The roof of the building is flat, not designed for walking and featuring an air conditioning unit for the entire building. A review of selected loadbearing structures of component floors was performed as a part of this thesis. The main load-bearing horizontal is composed of stiff ceilings, including the bordering ceiling of the third floor and the roof. Above-ground floors are to be constructed of pre-stretched ceiling girders Spiroll which are set onto reinforcing wreaths. Underground floors are to be constructed as a monolithic structure made of ferroconcrete. The vertical structure is constructed of perforated brick blocks for above-ground floors comprising floors 1-3, remaining underground walls are constructed of monolithic ferroconcrete. Foundation constructions are made of monolithic concrete white tub including confluence and review of the tub.
|
|
|
A Municipal Apartment Building
Lušovský, Lukáš ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The subject of this bachelor thesis is a new building of a four-storey non-blocked apartment building in Jeseník nad Odrou. The apartment building consists of five residential units with a garage and common rooms. The whole object is then covered with a cold roof. The main entrance to the building is located on the northeast side of the building at the 1st floor level. The main living rooms are oriented on energy-efficient sides. The vertical constructions are made mainly of Porotherm ceramic system components. Ceiling structures are designed as prefamily filigree. Stairs are monolithic reinforced concrete. The project was processed using the AutoCAD software.
|
|
|
Residential Building
Bělíček, Radek ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The aim of the bachelor thesis is to elaborate the project documentation of residental building in the village Děrné. It is a building with three above-ground floors in which there are in total 4 apartments, one of them is accessible. The construction system is designed as masonry Porotherm system. Facade is insulated with a ventilated facade insulation system. The building is covered with a flat green roof. Part of the project documentation is also a basic assessment of the building in terms of building physics.
|
|
|
Mixed-use Building
Vlado, Roman ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Annotation The aim of the thesis is new-building design of mixed-use building in cadastral of community Nové Mesto nad Váhom. Building is situated at free estate in the marginal of community. Building estate must have new feeder road built. In front of building will be the parking area. The mixed-use building is detached and four-storied building. At basement is situated underground garage for ten cars and store houses for flats. At first floor is situated cafe and commercial space. Cafe has kitchen, stock rooms and WC. Commercial space has staff facilities and sales area. One of the shops has back door to stock room. Parking space for staff is next to building. At second and third floor is situated eight flats. Four flats has 3 rooms and four left has 2 rooms. Each flat has got stock room, WC and bathroom. In each flat is situated entrance to the terrace. Terrace is on extensive green roof orientated to southwest. In the flats is kitchen together with living room because of bigger space. Floor in the flats is combination of ceramic tiles and laminated floor. Area with flats has a lift. Concrete foundations are on micropiles. Project is set up with system LIVETHERM building has heat cladding. At the building are plastic windows and colour is matching with facade. Foothpath around building are from interlocking pavement. Whole documentation is prepared to realization of building. Drawing documentation is prepared by software AUTOCAD.
|
|
|
University dormitory
Glogarová, Tereza ; Stavinohová, Jana (referee) ; Utíkalová, Ivana (advisor)
The new building of a university dormitory with workshops is the content of the presented thesis. The building consists of fifty-two beds for students’ accommodation with complete equipment in eight cells, three workshops and a technical support. This is a combination of reinforced concrete prefabricated skeleton and classical masonry building construction with insulation. The building has four floors. It is designed as seven towers with flat roofs, which protrude from a ground floor with a vegetative roof. Paved and parking areas are adjacent to the building. The project is designed into an urban area of Nový Jičín. Glass atrium and overall shape solution are the distinctive features of the proposal.
|
guest ::
