|
|
Analysis of effect of solar radiation concentration on the thermal insulation degradation in the flat roof construction
Židek, Ondřej ; Běžel, Jakub (referee) ; Žák, Antonín (advisor)
The master´s thesis analyzes influence of direct and reflected solar radiation to heat strain and degradation of thermal insulation in the flat roof construction. In many building was a problem in a significant degradation of thermal insulation made from expanded polystyrene in the vicinity of glass surfaces. To determine the causes of this problem, it was necessary to study and test the properties of building materials and the physical nature of the effect of solar radiation on the building structure. In the introductory section lists the cases of buildings with degradation of thermal insulation and existing knowledge on this issue. The theoretical part describes the technical properties of thermal insulating materials used in the flat roof construction, nature and division of solar radiation, optical laws of light reflection and physical theory to explain the technical thermal behavior of building materials and structures. The last part describes a practical model and analyzing measured data in thermal stress in the flat roof construction. The practical part also determines the importance of different influences configuration structures using to dynamic simulations. At the end of the practical part they are validated theoretical knowledge obtained by analyzing data from a practical model.
|
|
|
The power of solar radiation falling on a photovoltaic module
Kaliyev, Alexey ; Jandová, Kristýna (referee) ; Křivík, Petr (advisor)
The work is focused on the problem of the solar radiation power impacting on a photovoltaic module. In the theoretical part, the possibilities of using solar energy in renewable energy sources, especially in photovoltaic panels and solar collectors, were discussed and presented. Then the materials on the use of solar energy in these sources were reviewed. In addition, the three main components of incident solar radiation on a photovoltaic module or solar collector were described. Finally, the method for calculating the position of the sun across the sky was discussed and presented, as well as the method for calculating the various components of incident solar radiation on a photovoltaic module.
|
|
|
Simulator of solar light for the solar cells testing
Palla, Martin ; Solčanský, Marek (referee) ; Vaněk, Jiří (advisor)
The first part deals with an introduction to the basic fundamentals and presentation of theory from the assignment. The fundamentals are presented and described in detail. This part is followed by chapter describing possibilities of using solar energy. The paper presents possibilities of using both direct and diffuse solar radiation. The last chapter of the theoretical part is devoted to the basic description of the IEC 60904 and IEC 60904-9 standards. The practical part presents selected solar simulators and their measurement. Classification class according to IEC 60904-9 is determined from this measurement. The last part of the work is devoted to the construction of a solar simulator composed of LEDs. The simulator is then measured and its class is determined by emitted spectrum.
|
|
|
The influence of microclimate on the inside glass objects
Dvořáková, Hana ; Ell, Jiří (referee) ; Rubina, Aleš (advisor)
This master thesis deals with the influence of glazing on the microclimate inside buildings. In particular, I focused on the shading coefficient and the various factors that affect it. The thesis also concentrates on the origin and composition of the solar radiation, the formation of thermal stress and refraction. In the next part of the thesis, I focused on designing two variants of shielding factor and its impact on the thermal load of gym, sports hall and the related necessary changes. The last part of the thesis deals with experimental measurements of incident solar radiation passing through the window into real physical model. From the measured values, we determined realistic shading coefficient and then applied it in the previous section of this thesis.
|
|
|
The power of solar radiation falling on a photovoltaic module
Kaliyev, Alexey ; Jandová, Kristýna (referee) ; Křivík, Petr (advisor)
The work is focused on the problem of the solar radiation power impacting on a photovoltaic module. In the theoretical part, the possibilities of using solar energy in renewable energy sources, especially in photovoltaic panels and solar collectors, were discussed and presented. Then the materials on the use of solar energy in these sources were reviewed. In addition, the three main components of incident solar radiation on a photovoltaic module or solar collector were described. Finally, the method for calculating the position of the sun across the sky was discussed and presented, as well as the method for calculating the various components of incident solar radiation on a photovoltaic module.
|
|
|
Analysis of effect of solar radiation concentration on the thermal insulation degradation in the flat roof construction
Židek, Ondřej ; Běžel, Jakub (referee) ; Žák, Antonín (advisor)
The master´s thesis analyzes influence of direct and reflected solar radiation to heat strain and degradation of thermal insulation in the flat roof construction. In many building was a problem in a significant degradation of thermal insulation made from expanded polystyrene in the vicinity of glass surfaces. To determine the causes of this problem, it was necessary to study and test the properties of building materials and the physical nature of the effect of solar radiation on the building structure. In the introductory section lists the cases of buildings with degradation of thermal insulation and existing knowledge on this issue. The theoretical part describes the technical properties of thermal insulating materials used in the flat roof construction, nature and division of solar radiation, optical laws of light reflection and physical theory to explain the technical thermal behavior of building materials and structures. The last part describes a practical model and analyzing measured data in thermal stress in the flat roof construction. The practical part also determines the importance of different influences configuration structures using to dynamic simulations. At the end of the practical part they are validated theoretical knowledge obtained by analyzing data from a practical model.
|
|
|
The influence of microclimate on the inside glass objects
Dvořáková, Hana ; Ell, Jiří (referee) ; Rubina, Aleš (advisor)
This master thesis deals with the influence of glazing on the microclimate inside buildings. In particular, I focused on the shading coefficient and the various factors that affect it. The thesis also concentrates on the origin and composition of the solar radiation, the formation of thermal stress and refraction. In the next part of the thesis, I focused on designing two variants of shielding factor and its impact on the thermal load of gym, sports hall and the related necessary changes. The last part of the thesis deals with experimental measurements of incident solar radiation passing through the window into real physical model. From the measured values, we determined realistic shading coefficient and then applied it in the previous section of this thesis.
|
|
|
Simulator of solar light for the solar cells testing
Palla, Martin ; Solčanský, Marek (referee) ; Vaněk, Jiří (advisor)
The first part deals with an introduction to the basic fundamentals and presentation of theory from the assignment. The fundamentals are presented and described in detail. This part is followed by chapter describing possibilities of using solar energy. The paper presents possibilities of using both direct and diffuse solar radiation. The last chapter of the theoretical part is devoted to the basic description of the IEC 60904 and IEC 60904-9 standards. The practical part presents selected solar simulators and their measurement. Classification class according to IEC 60904-9 is determined from this measurement. The last part of the work is devoted to the construction of a solar simulator composed of LEDs. The simulator is then measured and its class is determined by emitted spectrum.
|
guest ::
