|
|
Morphology of Polyamide 12 and Polyamide 11 formed at overpressure and underpressure
Bělašková, Marie ; Tocháček, Jiří (referee) ; Bálková, Radka (advisor)
In this master thesis it was studied morphology of polyamide 12 (PA12), polyamide 11 (PA11) and their blends in the percent ratios 95/5, 75/25, 50/50, 25/75 and 5/95 formed at pressure 7 MPa in a calorimeter both after continual heating and cooling and after annealing and isothermal crystallization. Neat polyamides and blends were further characterized by thermogravimetric analysis, differential scanning calorimetry at atmospheric pressure, Fourier-transform infrared spectroscopy in attenuated total refection, and X-ray diffraction analysis. The increased pressure improved level of polyamide chains ordering in crystal lamellae. Thermal annealing improved especially ordering of PA12, isothermal crystallization led to considerable increase of crystallinity, whereas PA11-rich blends supported perfection of PA12 crystals. Partial transformation of - to -structure occurred in case of neat PA12 at high pressure, the change of the chain conformation into the closer one occurred in neat PA11 without transformation of the type of crystal structure.
|
|
|
CHARACTERIZATION OF WRAPPAGING FILMS BASED ON POLYETHYLENE AND POLYPROPYLENE
Bělašková, Marie ; Poláček, Petr (referee) ; Bálková, Radka (advisor)
By seven kinds of coextruded and blown packing polyethylene and polypropylene based films, which are supplied by Granitol were characterized in this bachelor thesis. The following methods were used for characterization: thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, confocal laser scanning microscopy , and scanning electron microscopy. The methods made possible to determine the composition of the films and to evaluate the degree of crystallinity.
|
|
|
Properties of polyethylene blown-films dependent on their composition
Štaffová, Martina ; Poláček, Petr (referee) ; Tocháček, Jiří (advisor)
This work deals with the influence of quantity of recycled material on physical properties of blown-film. The task of this work is to prepare set of laboratory made films with amount of LLDPE granulate from 0 to 100 % with addition of LDPE recycled material and furthermore with addition of filler, calcite. The following methods were used for characterization of blown films: tensile test, differential scanning calorimetry, Fourier transform infrared spectroscopy, confocal laser scanning microscopy. The same measurements were performed also on industrial made blown-film.
|
|
|
Morphology of Polyamide 12 and Polyamide 11 formed at overpressure and underpressure
Bělašková, Marie ; Tocháček, Jiří (referee) ; Bálková, Radka (advisor)
In this master thesis it was studied morphology of polyamide 12 (PA12), polyamide 11 (PA11) and their blends in the percent ratios 95/5, 75/25, 50/50, 25/75 and 5/95 formed at pressure 7 MPa in a calorimeter both after continual heating and cooling and after annealing and isothermal crystallization. Neat polyamides and blends were further characterized by thermogravimetric analysis, differential scanning calorimetry at atmospheric pressure, Fourier-transform infrared spectroscopy in attenuated total refection, and X-ray diffraction analysis. The increased pressure improved level of polyamide chains ordering in crystal lamellae. Thermal annealing improved especially ordering of PA12, isothermal crystallization led to considerable increase of crystallinity, whereas PA11-rich blends supported perfection of PA12 crystals. Partial transformation of - to -structure occurred in case of neat PA12 at high pressure, the change of the chain conformation into the closer one occurred in neat PA11 without transformation of the type of crystal structure.
|
|
|
Properties of polyethylene blown-films dependent on their composition
Štaffová, Martina ; Poláček, Petr (referee) ; Tocháček, Jiří (advisor)
This work deals with the influence of quantity of recycled material on physical properties of blown-film. The task of this work is to prepare set of laboratory made films with amount of LLDPE granulate from 0 to 100 % with addition of LDPE recycled material and furthermore with addition of filler, calcite. The following methods were used for characterization of blown films: tensile test, differential scanning calorimetry, Fourier transform infrared spectroscopy, confocal laser scanning microscopy. The same measurements were performed also on industrial made blown-film.
|
|
|
CHARACTERIZATION OF WRAPPAGING FILMS BASED ON POLYETHYLENE AND POLYPROPYLENE
Bělašková, Marie ; Poláček, Petr (referee) ; Bálková, Radka (advisor)
By seven kinds of coextruded and blown packing polyethylene and polypropylene based films, which are supplied by Granitol were characterized in this bachelor thesis. The following methods were used for characterization: thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, confocal laser scanning microscopy , and scanning electron microscopy. The methods made possible to determine the composition of the films and to evaluate the degree of crystallinity.
|
guest ::
