|
|
Fiber optical transmission system
Horský, Tomáš ; Münster, Petr (referee) ; Dejdar, Petr (advisor)
Bachelor thesis deals with the program processing for the simulation of dispersion on the optical transmission. Parameters of optical fiber, such as attenuation, diffusion, dispersion, and bandwidth are described in the theoretical part. The main focus is on dispersion while being the key parameter of this work. In the practical part, the measurement characteristics of the eye diagram and its analysis are discussed. Simulator of dispersion can serve both for simulation as well as a measuring device for real transmission routes.
|
|
|
Diagram Eye Imaging
Chýlek, Richard ; Kratochvíl, Tomáš (referee) ; Říčný, Václav (advisor)
The aim of this bachelor´s thesis was to design an adaptor for imaging the eye diagram of digital video signals in the basic zone. Adaptor is a device by which we can illustrate the signal distortion resulting from the passage through the transmission channel, using the XY displeying.This adaptor should be designed with the symbol timing recovery. This means that the adaptor has been divided into two parts. Part of the broadcast, which consists of a units generator timing signal, generator block and pseudorandom sequences. These blocks of me created a 127-bit sequence with different frequencies (2 MHz, 4 MHz, 8 MHz and 16 MHz). In the evaluation of the adaptor, which is composed of symbol timing recovery, frequency dividers, low pass filter and all-pass network for phase synchronization and adjustment signal amplifiers, the signal is divided into two branches. The first walked through a matching amplifier and led to vertical clamps oscilloscope. The second passes through progressively above districts and ultimately led to the horizontal clamp oscilloscope. The individual blocks were designed in detail and implementation schemes were drawn up for both of the adapter. From these themes, I then proposed a DPS for each of the adaptor. They were blocks of broadcast adaptor, evaluation of the adaptor, the blocks of resources and subpanel for two main blocks. The result of this work is complete documentation for the implementation of this adaptor. Direct implementation is not required.
|
|
| |
|
|
Extension of optical fiber transmission system
Horský, Tomáš ; Tomašov, Adrián (referee) ; Dejdar, Petr (advisor)
The diploma thesis describes the elaboration of a program for the simulation of an optical transmission path. The work introduces the basic parameters of optical transmission, such as attenuation, dispersion and bandwidth. Furthermore, the techniques of line code and error detection are described in the work, especially a cyclic redundancy sum. The key parameter of this thesis is dispersion of the optical signal. The work includes the characteristics of the eye diagram and its analysis. The resulting program can also be used to measure the real transmission route and its parameters.
|
|
|
The data transfer technologies in optical access networks (FTTx)
Matušík, Lukáš ; Míča, Ivan (referee) ; Reichert, Pavel (advisor)
The objective of diploma thesis is describe problems connected with designed of FTTX networks and bring the reader problems of data transmission in optical acces networks the type of PON. In the introduction are mentinoned individual technologies that already operate, and there are describe advantages disadvantages of the use topology point-to-point and point-to-multipoint. In the following chapters are dealt with problems with data broadcasting in the direction from final participant. In the other part of diploma thesis are described elements, that were used for the proposed transmission route. The own PON acces network was presented on the basis information obtained by comparing the various networks and the elements involved in them. The network presented in conclusion diploma thesis is involved in topology point to multipoint. This transmission route is simulated in the program that allows the involvement of network by the user’s need with real values. The acces network is simulated for different transmission speed and different distances. The assesment of created optical route results from the measured values, theirs source is program OptiSystem, these values are summarized in the final chapter.
|
|
|
Extension of optical fiber transmission system
Horský, Tomáš ; Tomašov, Adrián (referee) ; Dejdar, Petr (advisor)
The diploma thesis describes the elaboration of a program for the simulation of an optical transmission path. The work introduces the basic parameters of optical transmission, such as attenuation, dispersion and bandwidth. Furthermore, the techniques of line code and error detection are described in the work, especially a cyclic redundancy sum. The key parameter of this thesis is dispersion of the optical signal. The work includes the characteristics of the eye diagram and its analysis. The resulting program can also be used to measure the real transmission route and its parameters.
|
|
|
Fiber optical transmission system
Horský, Tomáš ; Münster, Petr (referee) ; Dejdar, Petr (advisor)
Bachelor thesis deals with the program processing for the simulation of dispersion on the optical transmission. Parameters of optical fiber, such as attenuation, diffusion, dispersion, and bandwidth are described in the theoretical part. The main focus is on dispersion while being the key parameter of this work. In the practical part, the measurement characteristics of the eye diagram and its analysis are discussed. Simulator of dispersion can serve both for simulation as well as a measuring device for real transmission routes.
|
|
| |
|
|
Diagram Eye Imaging
Chýlek, Richard ; Kratochvíl, Tomáš (referee) ; Říčný, Václav (advisor)
The aim of this bachelor´s thesis was to design an adaptor for imaging the eye diagram of digital video signals in the basic zone. Adaptor is a device by which we can illustrate the signal distortion resulting from the passage through the transmission channel, using the XY displeying.This adaptor should be designed with the symbol timing recovery. This means that the adaptor has been divided into two parts. Part of the broadcast, which consists of a units generator timing signal, generator block and pseudorandom sequences. These blocks of me created a 127-bit sequence with different frequencies (2 MHz, 4 MHz, 8 MHz and 16 MHz). In the evaluation of the adaptor, which is composed of symbol timing recovery, frequency dividers, low pass filter and all-pass network for phase synchronization and adjustment signal amplifiers, the signal is divided into two branches. The first walked through a matching amplifier and led to vertical clamps oscilloscope. The second passes through progressively above districts and ultimately led to the horizontal clamp oscilloscope. The individual blocks were designed in detail and implementation schemes were drawn up for both of the adapter. From these themes, I then proposed a DPS for each of the adaptor. They were blocks of broadcast adaptor, evaluation of the adaptor, the blocks of resources and subpanel for two main blocks. The result of this work is complete documentation for the implementation of this adaptor. Direct implementation is not required.
|
|
|
The data transfer technologies in optical access networks (FTTx)
Matušík, Lukáš ; Míča, Ivan (referee) ; Reichert, Pavel (advisor)
The objective of diploma thesis is describe problems connected with designed of FTTX networks and bring the reader problems of data transmission in optical acces networks the type of PON. In the introduction are mentinoned individual technologies that already operate, and there are describe advantages disadvantages of the use topology point-to-point and point-to-multipoint. In the following chapters are dealt with problems with data broadcasting in the direction from final participant. In the other part of diploma thesis are described elements, that were used for the proposed transmission route. The own PON acces network was presented on the basis information obtained by comparing the various networks and the elements involved in them. The network presented in conclusion diploma thesis is involved in topology point to multipoint. This transmission route is simulated in the program that allows the involvement of network by the user’s need with real values. The acces network is simulated for different transmission speed and different distances. The assesment of created optical route results from the measured values, theirs source is program OptiSystem, these values are summarized in the final chapter.
|
guest ::
