National Repository of Grey Literature 6 records found  Search took 0.00 seconds. 
Production of gully
Švejda, Jakub ; Jopek, Miroslav (referee) ; Podaný, Kamil (advisor)
The project elaborated design of technology production of the gully – the rotational extract with flange from the deep drawing corrosion resistant sheet iron 1.4301. Pursuant to of the literary pursuit and calculation was designed drawing without thinning the wall in two operation and that in one instrument with two bottom holders enabling their combination into one stroke. The drawing instrument makes use of as standardised components as construction elements calculated using calculations and consist of three parts. The bottom and upper are magnetically clamped on the hydraulic drawing press Dieffenbacher PO 250, with nominal tensile force 2500 kN. Both drawing punches and drawing dies are produced from alloyed instrumental steel 19 436.9 heat-worked according to drawing documentation.
Production of the cable holder in progressive dies
Němec, Miroslav ; Heinl, Tomáš (referee) ; Žák, Ladislav (advisor)
This bachelor thesis render design production of the cable holder from corrosion resistant steel X5CrNi8-10 in progressive dies. On basis of theoretical knowledge and carried out calculations was designed construction of progressives dies for production from sheet scroll. This tool include cutting, bending and stamping. For production was selected eccentric press LEXN 100 C from company TOMA with rated forming force 1000 kN. In conclusion bachelor thesis is also economic evaluation.
The influence of the length of arc on the depth of the weld
Holas, Tomáš ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
In this bachelor thesis I observe the influence of changing the length of the welding arc on the depth of the weld. Welding materials were low carbon steel and austenitic corrosion resistant steel. It was welded by MIG and TIG methods.
The influence of the length of arc on the depth of the weld
Holas, Tomáš ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
In this bachelor thesis I observe the influence of changing the length of the welding arc on the depth of the weld. Welding materials were low carbon steel and austenitic corrosion resistant steel. It was welded by MIG and TIG methods.
Production of gully
Švejda, Jakub ; Jopek, Miroslav (referee) ; Podaný, Kamil (advisor)
The project elaborated design of technology production of the gully – the rotational extract with flange from the deep drawing corrosion resistant sheet iron 1.4301. Pursuant to of the literary pursuit and calculation was designed drawing without thinning the wall in two operation and that in one instrument with two bottom holders enabling their combination into one stroke. The drawing instrument makes use of as standardised components as construction elements calculated using calculations and consist of three parts. The bottom and upper are magnetically clamped on the hydraulic drawing press Dieffenbacher PO 250, with nominal tensile force 2500 kN. Both drawing punches and drawing dies are produced from alloyed instrumental steel 19 436.9 heat-worked according to drawing documentation.
Production of the cable holder in progressive dies
Němec, Miroslav ; Heinl, Tomáš (referee) ; Žák, Ladislav (advisor)
This bachelor thesis render design production of the cable holder from corrosion resistant steel X5CrNi8-10 in progressive dies. On basis of theoretical knowledge and carried out calculations was designed construction of progressives dies for production from sheet scroll. This tool include cutting, bending and stamping. For production was selected eccentric press LEXN 100 C from company TOMA with rated forming force 1000 kN. In conclusion bachelor thesis is also economic evaluation.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.