|
|
Syngas Cleaning with Using Metal Catalysts
Baláš, Marek ; Noskievič, Pavel (referee) ; Kabát, Viktor (referee) ; Skála, Zdeněk (advisor)
Gasification of biomass is a one of the several technologies for energy production from biomass. Biomass is a promising renewable source of energy and is in a centre of attention of energy industry not only in the Czech Republic, but also in the EU and in the world. Gasification is a thermo chemical transformation of fuel with access of understoicheiometric amount of oxidizer which produces gas of low heating value. Its main combustible components are hydrogen, carbon dioxide and methane. Produced gas may be further used in power and heating plants. Besides combustible and neutral components, gas also contains pollutants such as sulphur compounds, chlorine compounds, ash and tar. It is tar which is considered to be the underbelly of gasification as it causes, along with ash, fouling in transport tracks and terminal equipment, and blocks direct application of gas. This dissertation thesis presents design of filter for elimination of tar from the gas generated in fluid gasification equipment. This work is closely related to current research at Energy Institute at Faculty of Mechanical Engineering at Brno University of Technology. First part deals with theoretical background of this issue. Biomass properties are mentioned in relation to gasification. Types of gasification equipment are described and principle of gasification including chemical reactions is given in detail. Special part is dedicated to pollutants in the gas, especially to production of tar and its properties, which is important for consequent work. Main focus is on possibilities of catalytic cleaning of gas from tar. Principle of tar decomposition is described and types and properties of catalysts are given. Part of the thesis tackles the issue of real operations and loss of efficiency of catalyst due to sulphur compounds, sintering and carbon fouling. Based on experience and analysis in the first part of the thesis, concept of elimination of tar from gas was laid out. In addition to that, method for measurement at Biofluid 100 experimental unit was outlined and filter for testing of industrial catalysts using metal was designed. Series of experiments were further conducted in order to find out efficiency of three opted catalysts for tar decomposition. Results of these experiments are described in detail and assessed in the conclusion of this thesis which also contains outline for economic assessment of method of gas cleaning using catalysts.
|
|
|
Design of Methods for Cleaning of Gas at Gasification of Stalk
Moskalík, Jiří ; Noskievič, Pavel (referee) ; Kabát, Viktor (referee) ; Bébar, Ladislav (referee) ; Fiedler, Jan (advisor)
Due to the continuous growth of energy consumption it is required that development in the energy sector is focused on renewable energy sources. Another possibility how to reduce the consumption of primary energy resources is also searching for new and non-traditional fuels. The biomass is the best and potentially expandable renewable energy source in geographic conditions in the Czech Republic. The energy usage of biomass has experienced a significant increase in recent years, however, even in the big energy power plant. This increase in consumption made mainly from wood biomass a shortage fuel, and it began to raise its price. The consumers of biomass fuel are starting to look for a different type of fuel at this time. Stalk and slightly contaminated biomass are representatives of these non-traditional fuels. Stalks are mostly annual plants grown primarily for subsistence. Waste parts of these plants can be utilized for production of energy. The characteristic temperatures of stalk ash have relatively low values. Sintering of ash in a device is one of the obstacles for energy usage of stalk. Sintering of ash brings a number of operational problems at power facilities. Therefore, the part of a research is dedicated to the melting of ash. The thermal gasification is one of the possibilities how to use biomass efficiently. Gasification can be understood as the thermo-chemical conversion of solid fuel into a different state, in this case the gaseous state. The combustion process is generally more manageable for gaseous fuels. Due to this process ower emissions of undesirable compounds at the output of the combustion device can be achieved. Thermal gasification process takes place under stochiometric access of oxidant. The gas with low heating value is on the outlet from gasification process. The main components of produced gas are hydrogen, carbon monoxide and methane. The final gas contains also a lot of undesirable constituents, which make this gas disadvantaged in energy. These constituents are neutral components that dilute gas only, and pollutants as dust, tar and compounds of sulfur and chlorine. These pollutants complicate further use of the generated gas. The tar compounds together with dust causing build-up on the conveyor pipe and also on the combustion equipment, which are using this generated gas. The quality of produced gas is increases by another reprocessing and cleaning. The purified gas can be used for cogeneration of energy and burn it in internal combustion engines or gas turbines. Other possibility is typical usage for heating according to the needs of technology. The atmospheric fluidized bed gasification reactor Biofluid 100th was built for experimental purposes in the laboratories of the Energy Institute. The thesis is focused on thermal gasification of stalk and other non-traditional fuels in Biofluid device. The aim is to achieve a stable gasification process of stalk and thereby verify the possibility of stalk use as fuel for technology Biofluid. Subsequent aim is design of methods for cleaning the raw gas from the tar compounds. The research is focused on the secondary gas cleaning methods due to the requirements of high purity of the resulting gas.
|
|
|
Design of Methods for Cleaning of Gas at Gasification of Stalk
Moskalík, Jiří ; Noskievič, Pavel (referee) ; Kabát, Viktor (referee) ; Bébar, Ladislav (referee) ; Fiedler, Jan (advisor)
Due to the continuous growth of energy consumption it is required that development in the energy sector is focused on renewable energy sources. Another possibility how to reduce the consumption of primary energy resources is also searching for new and non-traditional fuels. The biomass is the best and potentially expandable renewable energy source in geographic conditions in the Czech Republic. The energy usage of biomass has experienced a significant increase in recent years, however, even in the big energy power plant. This increase in consumption made mainly from wood biomass a shortage fuel, and it began to raise its price. The consumers of biomass fuel are starting to look for a different type of fuel at this time. Stalk and slightly contaminated biomass are representatives of these non-traditional fuels. Stalks are mostly annual plants grown primarily for subsistence. Waste parts of these plants can be utilized for production of energy. The characteristic temperatures of stalk ash have relatively low values. Sintering of ash in a device is one of the obstacles for energy usage of stalk. Sintering of ash brings a number of operational problems at power facilities. Therefore, the part of a research is dedicated to the melting of ash. The thermal gasification is one of the possibilities how to use biomass efficiently. Gasification can be understood as the thermo-chemical conversion of solid fuel into a different state, in this case the gaseous state. The combustion process is generally more manageable for gaseous fuels. Due to this process ower emissions of undesirable compounds at the output of the combustion device can be achieved. Thermal gasification process takes place under stochiometric access of oxidant. The gas with low heating value is on the outlet from gasification process. The main components of produced gas are hydrogen, carbon monoxide and methane. The final gas contains also a lot of undesirable constituents, which make this gas disadvantaged in energy. These constituents are neutral components that dilute gas only, and pollutants as dust, tar and compounds of sulfur and chlorine. These pollutants complicate further use of the generated gas. The tar compounds together with dust causing build-up on the conveyor pipe and also on the combustion equipment, which are using this generated gas. The quality of produced gas is increases by another reprocessing and cleaning. The purified gas can be used for cogeneration of energy and burn it in internal combustion engines or gas turbines. Other possibility is typical usage for heating according to the needs of technology. The atmospheric fluidized bed gasification reactor Biofluid 100th was built for experimental purposes in the laboratories of the Energy Institute. The thesis is focused on thermal gasification of stalk and other non-traditional fuels in Biofluid device. The aim is to achieve a stable gasification process of stalk and thereby verify the possibility of stalk use as fuel for technology Biofluid. Subsequent aim is design of methods for cleaning the raw gas from the tar compounds. The research is focused on the secondary gas cleaning methods due to the requirements of high purity of the resulting gas.
|
|
|
Syngas Cleaning with Using Metal Catalysts
Baláš, Marek ; Noskievič, Pavel (referee) ; Kabát, Viktor (referee) ; Skála, Zdeněk (advisor)
Gasification of biomass is a one of the several technologies for energy production from biomass. Biomass is a promising renewable source of energy and is in a centre of attention of energy industry not only in the Czech Republic, but also in the EU and in the world. Gasification is a thermo chemical transformation of fuel with access of understoicheiometric amount of oxidizer which produces gas of low heating value. Its main combustible components are hydrogen, carbon dioxide and methane. Produced gas may be further used in power and heating plants. Besides combustible and neutral components, gas also contains pollutants such as sulphur compounds, chlorine compounds, ash and tar. It is tar which is considered to be the underbelly of gasification as it causes, along with ash, fouling in transport tracks and terminal equipment, and blocks direct application of gas. This dissertation thesis presents design of filter for elimination of tar from the gas generated in fluid gasification equipment. This work is closely related to current research at Energy Institute at Faculty of Mechanical Engineering at Brno University of Technology. First part deals with theoretical background of this issue. Biomass properties are mentioned in relation to gasification. Types of gasification equipment are described and principle of gasification including chemical reactions is given in detail. Special part is dedicated to pollutants in the gas, especially to production of tar and its properties, which is important for consequent work. Main focus is on possibilities of catalytic cleaning of gas from tar. Principle of tar decomposition is described and types and properties of catalysts are given. Part of the thesis tackles the issue of real operations and loss of efficiency of catalyst due to sulphur compounds, sintering and carbon fouling. Based on experience and analysis in the first part of the thesis, concept of elimination of tar from gas was laid out. In addition to that, method for measurement at Biofluid 100 experimental unit was outlined and filter for testing of industrial catalysts using metal was designed. Series of experiments were further conducted in order to find out efficiency of three opted catalysts for tar decomposition. Results of these experiments are described in detail and assessed in the conclusion of this thesis which also contains outline for economic assessment of method of gas cleaning using catalysts.
|
guest ::
