|
|
Testing bonded steel sheet coated with zinc
Zedníček, Zbyněk ; Štroner, Marek (referee) ; Dvořák, Milan (advisor)
The aim of this master´s thesis is the design chosen for testing bonded joints on the specified galvanized steel sheet in laboratory conditions and obtaining parameters of bonded joints for application in industrial practice. Basic tests for testing bounded joints were presented in the work. Subsequently, two tests were selected and verified in laboratory conditions. The result of these tests are specific numerical values that were compared with values gained during tests linking method clinch.
|
|
|
Sheets bonding and their testing
Straka, Jan ; Kandus, Bohumil (referee) ; Dvořák, Milan (advisor)
The aim of this bachelor thesis is to design selected load tests for bonded joints at specified steel sheet DC01 under laboratory conditions and to compare the strength of the degreased joints with technical alcohol and uncrushed joints. The basic methods of joining thin sheets are presented in the thesis. The following is an overview of test methods for bonded sheets according to the relevant technical standards. The results of the selected tests are the specific numerical values that have been compared with those reported by the manufacturer of the particular adhesive.
|
|
|
Adhezive bonding in the car industry
Bláha, Aleš ; Žák, Ladislav (referee) ; Kubíček, Jaroslav (advisor)
This thesis examines bonded joints of car bodies, which are the most mechanically challenged for selection of suitable, modern adhesives for the construction of the car body. The first part focuses on the description of the bonding technology, including theoretical knowledge related to the use for bonding assemblies for bodywork. The specified structure and its solution is carried out in the way that were selected by three types of adhesives SIKA and mutual comparison of their properties. After that an experimental test is conducted at 18 samples per overhanging shear tensile strength and finally followed by the evaluation and selection of the most appropriate and optimal variant for various bonding applications.
|
|
|
A comparison of different types of epoxy adhesives
Mihulka, Jan ; Žák, Ladislav (referee) ; Kubíček, Jaroslav (advisor)
This thesis is focused on a bonding technology. The first part describes the theory of the bonding and it is discussed the main areas of this technology. The experimental part deals with the comparison of four two-component epoxy adhesives in terms of shear strength. For the experiment it had been selected adhesives: Bison Epoxy Universal, Pattex Repair Epoxy Ultra Strong 5 min, Ergo 7430 and Letoxit LH 232. After performing the experiment, it was shown that Bison Epoxy Universal and Pattex Repair Epoxy Ultra Strong 5 min achieved the strengths stated in the datasheet. The strengths of Ergo 7430 and Letoxit LH 232 adhesives was lower than stated in their technological products, thefore, did not meet our expectations. The reason for not achieving the declared strength was probably poor dosing or insufficient mixing of ingredients.
|
|
|
Increasing production effectiveness of wooden mounting part
Strnad, Jan ; Mouralová, Kateřina (referee) ; Zemčík, Oskar (advisor)
This bachelor thesis describes the current production of semi-finished wood in a company TON a.s. These semi products are subsequently designed for assembly, painting, packaging and distribution. Bachelor thesis closer specializes in the production of slotting the mounting rail to the wooden part of the machine Zuckerman, then assembling and gluing to the assembly, which consists of two pieces of wood. These reports serve as sub-assemblies for assembly chair. Identification of deficiencies in the production of cutting grooves in wood parts and their assembly is the main task of work. Based on the knowledge base was developed techno-economic evaluation.
|
|
|
The relation between the early mother-child contact after birth and the subjective perception of their relationship
Kolumpková, Michaela ; Horáková Hoskovcová, Simona (advisor) ; Takács, Lea (referee)
This work observes the relation between mother-child early contact immediately after birth and emotional tune of mothers in relation to their child. The theoretical part deals with the situation of labor, further development after birth, with an emphasis on very early contact and ways to establish the relationship between a mother and a child. In the end of the theoretical part, the quality of the relationship between a mother and a child and the interactions between them is described. The empirical part examines if the early contact immediately after birth or a general contact between mothers and babies in the hospital, influence emotional tune of a mother to her child. The research was based on interviews with mothers who were describing their child. It was assumed that the emotional tune of mothers is associated with the choice of adjectives describing their child or the whole situation. However, research does not show a significant relation of early contact and emotional tune of a mother to her child. Based on the research results, the conclusion is that the immediate early contact after birth does not have a significant effect on the quality of the relationship between a mother and her child.
|
|
|
Virtual launch of the robotic welding and gluing line using Tecnomatix - Process Simulate
Tomeček, Radim ; Juříček, Martin (referee) ; Simeonov, Simeon (advisor)
This thesis deals with the design and creation of a virtual twin of a robotic cell intended to simulate and create a virtual launch of this cell. The goal was to design the layout of the robotic cell and subsequently create a full virtual run of an automated robotic workstation designed for spot welding, MIG welding and bonding processes. The initial research section deals with the individual technologies to be simulated. Subsequently, three designs for the layout of the robotic workstation are developed in this thesis. After evaluating and selecting the design, a virtual twin of the robotic cell is created using Process Simulate and then all the processes are simulated resulting in the virtual launch of the cell.
|
|
|
Current trends in the care of newborns.
MARKOVÁ, Anna
Neonatology is a branch of medicine that still evolves. Therefore, it is necessary to adjust some experienced, obsolete or even dangerous procedures so as to find current care options that will suit either current medicine or current society. The thesis aims both to verify the newborn care development in a period of the last twenty years and to primarily map the actual situation. The diploma thesis is divided into two parts, theoretical and practical. The theoretical part of the work deals with current obstetrics and clarifies individual areas of newborn care. The practical part presents the results obtained using a qualitative research survey, having two goals delineated. The first goal focuses on mapping changes occurring in the newborn care in the past twenty years. The second goal aims to realize possible benefits of alterations to mother and child. To obtain data, two sets of framework questions were set. One questionnaire was determined for nurses and midwives who had at least ten years' experience in taking care for the newborn and the other for mothers where it was at least a five-year- gap between the first and last delivery. The research survey shows that over the years there have been changes in all areas of newborn care that we monitor. In the first treatment of the newborn after birth, in the initiation of nutrition, bath, care of the umbilical stump, in the childbirth management and other necessary procedures where the needs of the child and the mother's wishes must merge. Personnel' knowledge and procedures in individual facilities also play an important role, which should correspond with current recommendations. Information obtained from the research survey could be used to think about possibilities how to make the work of nurses and midwives more efficient and it could be used to improve the quality of nursing care.
|
|
|
Precise bonding of composite materials
Tellinger, Adam ; Gregor, Lukáš (referee) ; Kupčák, Radim (advisor)
This bachelor's thesis deals with the issue of bonding composite materials. The first part of the bachelor's thesis is focused on research into the production of composite materials and gluing technologies. The content of the practical part is the design of test specimens and a preparation for their bonding with subsequent production. Furthermore, verification of compliance with the required accuracy of bonded joints when using different adhesives using 3D measurements.
|
|
|
Mother-infant bonding - a historical comparison
Slezáková, Zdeňka ; Dudová, Radka (advisor) ; Šmídová, Olga (referee)
Bonding is an emotional and biological process that creates a bond between a mother and her child and is among others important for easier breastfeeding, faster recovery of the mother etc. It is important to support it by an early contact between the mother and her newborn child. The diploma thesis aims to compare the discourse regarding mother-infant bonding and its support in our country around the year of 1980, when the rooming-in system appears, up to the present, with the milestone between 1998 and 2000, when the Centre of Active Birth was established as a result of changes in birth care that occurred then and which started to offer a different kind of care from the model that was known and used in the Czech Republic at that time. Emphasis will be put on the development of the discourse, changes in birth and after-birth care it has brought and changes of its participants and the role which women have as receivers of care. The theoretic part introduces the relatively little-known term 'bonding' and its support from the biological and social points of view, then discourse analysis will be applied in the methodological and experimental parts of the thesis. Analysed materials included media communication both in printed and electronic forms available at each analysed period. Keywords:...
|
guest ::
