|
|
Static solution of monolithic reinforced concrete structure
Tošenovjan, Marek ; Šulák, Pavel (referee) ; Zlámal, Martin (advisor)
The diploma thesis describes structural design of selected elements of monolitic reinforced concrete seven-storey building. Structure is designed as a combined reinforced concrete frame with shear walls and core. The main point of structural analysis is design of locally supported RC slab above the 2ND basement floor, column on the 2ND basement floor, piles and analysis of foundation of building and its influence of support stiffness on connected load-bearing structures.
|
|
|
Elevated Road across the Dam Hričov
Holba, Radek ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
Idea of this diploma thesis is comparison of different diameters of piles which are used for bridge foundation. Diameters of piles are 1200 and 1500 mm in this case. Diploma thesis is about technical implementation, financial comparison. In outset you can read about possibilities of bridge foundation on water surface. In the end of this thesis there is described technological process of foundation for bridge across the dam Hričov.
|
|
|
Technological stage of realization foundantion of storage and factory building
Lepík, Jiří ; Ing.Martin Mohapl (referee) ; Diaz, Yvetta (advisor)
Goal of bachelor thesis is work on construction-technological project of two-aisle hall foundation. Hall load-bearing structure is designed from frames loaded by steely joints. Foundations ratio of building site is complicated therefore will be placed gravel-sand pillows under socle. Building is located in non-developed site on plane terrain and will continue on current factory building. Park of the work will be technological construction of foundation, design of machine set, financial plan and schedule of realization.
|
|
|
Foundation of Bridge
Ščudla, Martin ; Štefaňák, Jan (referee) ; Masopust, Jan (advisor)
The thesis focuses on design of 5 - square bridge foundation in Ostrava Svinov including covering of construction pits. The bridge is founded on the groups of drilled large diameter piles. Design and assessment is realized in program GEO 5. The thesis is divided into 6 parts: introduction, geotechnical circumstances, concomitant report, static calculations, technical report and documentation.
|
|
| |
|
|
Multipurpose Hospital Building in Český Krumlov - Building Technology Project
Mikulášek, Jiří ; Nečasová, Barbora (referee) ; Liška, Pavel (advisor)
The diploma thesis is focused on the elaboration of a construction technology project for the construction of a new hospital pavilion in Český Krumlov. The thesis processes the preparation of construction and proposal of the organization of individual activities on the construction site in time sequence. The thesis contains technological regulations for the foundation of construction and realization of the monolithic frame on the 1st floor, which also includes drawings of the formwork of the ceiling slab and a scheme of formwork of columns and walls. Further contents are technological report, technological study of realization, transport relations, time and financial plans, complete construction site equipment for the whole construction phase, design of construction mechanisms and assessment of their suitability for use, resource balance, technological analysis, itemized budget, and occupational health protection for selected processes and noise studies dealing with the impact of building construction on the surrounding development.
|
|
|
Bearing capacity of pile foundations
Michalčák, Jan ; Doněk, Michal (referee) ; Glisníková, Věra (advisor)
The thesis deals with calculation of foundation of pilot bases. In the first part, the author focuses on the numerical application of the Final Element Method for calculating the internal forces on the pilot and the software implementation of the proposal by the Masopust pilot (2nd Limit State). The second, practical part uses previous knowledge and created program to calculate the foundation of the bridge pillar on the bypass around Opava.
|
|
|
Zemědělská technika a mechanizace pro agrolesnictví
Makovský, Milan
The aim of the thesis is to analyse the newly prepared subsidy title Agroforestry. To propose the necessary techniques for the establishment and subsequent care of agroforestry systems. The chosen topic is addressed on the basis of the processed information from specialized literature sources that describe the requirements of this system. The developed solution provides the possibility of comprehensive establishment (planting) and maintenance of the system, thanks to the creation of procedures and machinery lines for the maintenance of all tree species covered by the agroforestry subsidy but also for tree species outside the scope of the subsidy measure. The main contribution of this work is to analyze the Agroforestry subsidy title and, thanks to the knowledge found, to offer those who will implement this measure in their agroecosystem the right set-up of the machine line so that they can meet all the criteria and requirements set and can achieve the fulfillment of the subsidy title. The paper further discusses the nature and importance of agroforestry systems, their impact on the ecosystem and their benefits. It also describes the types of agroforestry systems depending on the location and method of establishment. The thesis includes a description of the history of agroforestry in the Czech Republic.
|
|
|
European companies - process of establishment and their place in the economy of the EU member states
Galasovský, Petr
This bachelor thesis focuses on process of establishment of the European Companies and their impact on the economy of the EU Member States. The thesis is divided to two parts. First part describes the genesis of the idea of the European Company, their legal ascpects and the process of their establishment. The second part analyse the position of these companies on the European market. The end of the thesis contains the evaluation of the market analysis and the prediction of future development.
|
|
|
The History of Waldsassen Abbey since its Foundation to 1420 in Relation to Rulers of Bohemia and to the Cistercian Order
Hrdlička, Vojtěch ; Zdichynec, Jan (advisor) ; Bobková, Lenka (referee)
Annotation/Abstract: This bachelor thesis deals with the history and the development of cistercian abbey in Waldsassen since its origin in 1133 to 1420. This year is upper time limit of this thesis. This thesis should cover the reasons of foundation of this monastery, its imfluence, power in the Cheb region and his financial and economic relations and also changes inside monastic community. Important are social relations among particular members of the convent, especially part of the abbot like director of the monastery is pointed out. Author attempted to show connections of abbey in politics and participation off its members in the forming of history of Central Europe. Although Waldsassen was active in the Holy Roman Empire and developed its relations with the territories of Empire (Bavaria, Upper Palatinate, Egerland), it had the connections to the lands of the Crown of Bohemia and their rulers as well. It is the reason, why the most extensive chapter of this thesis is the fourth one about own history of abbey, the fifth one describes the relations of monastery with the czech sovereigns, but the connections of rulers of lands of the Crown of Bohemia were usually more feeble than these with the rulers of Roman empire.
|
guest ::
