|
| |
|
|
The influence of mechanical alloying on contamination of powder mixtures and bulk materials
Kubíček, Antonín ; Hadraba, Hynek (referee) ; Moravčík, Igor (advisor)
This thesis deals with the influence of process parameters on the contamination level of powder materials produced by mechanical alloying (MA) technology. For this purpose austenitic stainless steel 316 L and equiatomic CoCrFeNi high-entropy alloy (HEA) were prepared by high-energy ball milling. Both materials were milled in argon and nitrogen atmospheres from 5 to 30 hours. Spark plasma sintering method (SPS) was then used for consolidation of chosen powder samples. Chemical analysis of contamination within MA was carried out using combustion analysers for determination of carbon, oxygen, and nitrogen contents after different lengths of milling. Also differences in chemical composition of powder and corresponding bulk samples were measured. The microstructure analysis using scanning electron microscopy (SEM) of both powder and bulk materials was executed with focus on oxide and carbide presence and dispersion. Increasing content of carbon with increasing milling time was observed across all measured samples. This contamination is attributed to using milling vial made of tool steel AISI D2 (containing 1,55 wt. % of carbon). Increase of carbon content within consolidation using SPS was also observed. Milling of specimens using N2 as milling atmosphere caused higher contamination level in both AISI 316 L and HEA compared to milling in argon.
|
|
|
Nitride dispersion strengthened Cantor´s high entropy alloys
Havlíček, Štěpán-Adam ; Moravčík, Igor (referee) ; Hadraba, Hynek (advisor)
High Entropy Alloy (HEA) is a class of construction steels based on the mixing of five or more elements in approximately equimolar ratios. Despite the ambiguity of their future use, HEAs represent a significantly new group of construction materials that are currently receiving a great deal of attention. Single-phase HEAs fail when used at elevated tempera-tures. The improvement of their high-temperature resistance was achieved by introducing a dispersion of oxides Al2O3 and Y2O3. To generalize the positive effect of dispersions on the mechanical properties at elevated temperatures, particles of a similar nature were cho-sen. These were dispersed particles of nitrides: hardness-incompatible AlN and hardness-compatible BN. The particles were evenly distributed inside the alloys by mechanical al-loying and compacted by SPS (Spark Plasma Sintering). The new structural alloy reached a density higher than 96.5 % and brought an increase in yield strength at room tempera-ture of up to 67 % and 40 % at elevated temperatures, while maintaining a homogeneous distribution of input powders.
|
|
|
Nitride dispersion strengthened Cantor´s high entropy alloys
Havlíček, Štěpán-Adam ; Moravčík, Igor (referee) ; Hadraba, Hynek (advisor)
High Entropy Alloy (HEA) is a class of construction steels based on the mixing of five or more elements in approximately equimolar ratios. Despite the ambiguity of their future use, HEAs represent a significantly new group of construction materials that are currently receiving a great deal of attention. Single-phase HEAs fail when used at elevated tempera-tures. The improvement of their high-temperature resistance was achieved by introducing a dispersion of oxides Al2O3 and Y2O3. To generalize the positive effect of dispersions on the mechanical properties at elevated temperatures, particles of a similar nature were cho-sen. These were dispersed particles of nitrides: hardness-incompatible AlN and hardness-compatible BN. The particles were evenly distributed inside the alloys by mechanical al-loying and compacted by SPS (Spark Plasma Sintering). The new structural alloy reached a density higher than 96.5 % and brought an increase in yield strength at room tempera-ture of up to 67 % and 40 % at elevated temperatures, while maintaining a homogeneous distribution of input powders.
|
|
|
The influence of mechanical alloying on contamination of powder mixtures and bulk materials
Kubíček, Antonín ; Hadraba, Hynek (referee) ; Moravčík, Igor (advisor)
This thesis deals with the influence of process parameters on the contamination level of powder materials produced by mechanical alloying (MA) technology. For this purpose austenitic stainless steel 316 L and equiatomic CoCrFeNi high-entropy alloy (HEA) were prepared by high-energy ball milling. Both materials were milled in argon and nitrogen atmospheres from 5 to 30 hours. Spark plasma sintering method (SPS) was then used for consolidation of chosen powder samples. Chemical analysis of contamination within MA was carried out using combustion analysers for determination of carbon, oxygen, and nitrogen contents after different lengths of milling. Also differences in chemical composition of powder and corresponding bulk samples were measured. The microstructure analysis using scanning electron microscopy (SEM) of both powder and bulk materials was executed with focus on oxide and carbide presence and dispersion. Increasing content of carbon with increasing milling time was observed across all measured samples. This contamination is attributed to using milling vial made of tool steel AISI D2 (containing 1,55 wt. % of carbon). Increase of carbon content within consolidation using SPS was also observed. Milling of specimens using N2 as milling atmosphere caused higher contamination level in both AISI 316 L and HEA compared to milling in argon.
|
|
| |
guest ::
