|
|
Design and analysis of reinforced concrete or masonry structures
Skočdopole, Jakub ; Švaříčková, Ivana (referee) ; Požár, Michal (advisor)
The bachelor's thesis deals with the static solution of the reinforced concrete ceiling slab and the inclined column of a 2-storey multi-storey building. The first part is devoted to the design of a point-supported plate, a cross-reinforced plate and an inclined column inclined by 15° from the vertical structure according to the limit state method. A spatial 3D model was created in the SCIA Engineer program, which was used to determine the internal forces in the structure. The correctness of the model results was verified by the sum of moments method. The second part deals with the study of the influence of the slope of the columns on the structure, when one row of columns in the 2nd floor was inclined and then the effect of this change on the structure and the static assessment were compared. Reference slopes chosen for the study: 0°; 15°; 30°; 50°, a partial spatial 3D model of the structure was created for each variant. The appendix of the bachelor's thesis is a detailed static calculation according to valid ČSN EN standards, drawing documentation and a study of the influence of the inclination of one row of columns on the reinforced concrete structure.
|
|
|
Reinforced concrete lookout tower
Vaněčka, Jan ; Zich, Miloš (referee) ; Koláček, Jan (advisor)
The aim of this thesis is the static design and assessment of the reinforced concrete structure of the observation tower. The design is further supplemented with visualizations of the architectural design of the structure. Structurally, the observation tower is designed as a locally supported slab by four columns, which are based on footings on the bedrock. The location of the structure is being considered near the ruins of Helfštýn Castle in the Olomouc region.
|
|
|
Reinforced concrete structure
Hubačková, Pavlína ; Jeneš, Rostislav (referee) ; Šulák, Pavel (advisor)
My bachelor thesis focuses on the design of selected parts of monolithic reinforced concrete structures of a department store. Elements for design are locally supported ceiling sab, column and foundation pad. The calculation of internal forces was performed in a computational program SCIA Engineer 17. The Results of the software are compared with the result of the simplified manual method. The settlement of foundation was performer in program GEO 5. A graphical documentation of selected elements is also a part of the thesis. The construction is designed and assessed according to ČSN EN 1992 - 1 - 1.
|
|
| |
|
|
Concrete flat slab supported by columns
Turek, Jan ; Požár, Michal (referee) ; Perla, Jan (advisor)
This bachelor thesis deals with design of concrete flat slab of hospital building. The slab above the ground floor was designed. Internal forces were analysed with RFEM software based on finite entity method. Results were proved by the Direct Design Method and Equivalent Frame Method. The structural assessment was performed according to ultimate and serviceability limit states.
|
|
|
Reinforced concrete structure of a administrative building
Januš, Ondřej ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The main subject of this bachelor thesis is focused on the design of reinforced concrete locally supported slab of a multifunction building. Internal forces are calculated by a computer software SCIA Engineer and its resultes are compered with simplifield method. Another part includes the design of a reinforced concrete stairway and a column situated in the center of the disposition. The calculation method is based on ČSN EN 1992-1-1.
|
|
| |
|
|
Analysis of behaviour of reinforced concrete slab
Kubínek, Michal ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
Bachelor thesis describes the analysis of behavior of existing reinforced concrete slab, locally supprorted, ceiling in hospital including 2nd limit state. Calculation od internal forces was made by computer program SCIA Engineer. Several models were made, model with best behavior due to real construction was used for dimensioning. Each model was compared with manual calculation by equivalent frame analysis. After finding inconvenient deflection, especially due to connected construction, new design was made. Thickness of slab was increased and new design of reinforcement was made. New construction was verified for both limit states.
|
|
|
Reinforced concrete structure of administrative building
Hejl, Zbyněk ; Požár, Michal (referee) ; Šulák, Pavel (advisor)
My bachelor thesis focuses on the design of selected parts of monolithic reinforced concrete structures of an administrative building. It is about a locally supported ceiling slab, an inner column and a staircase. Calculation of the internal forces was performed in the SCIA Engineer program and then verified by a hand method. The construction is assessed according to ČSN EN 1992 - 1 - 1.
|
|
| |
guest ::
