|
|
Storage hall
Osyková, Martina ; Šulák, Pavel (referee) ; Laníková, Ivana (advisor)
The master thesis ´´Storage hall” deals with designing of selected elements prefabrikated skeleton hall. Discussed elements are truss, beam, girder, column and prefabricate footing. Within above mentioned elements was carried out static analysis, design of reinforcement and reinforcement drawings. Analysis of internal forces for columns and prefabricate footing was carried out with usage of the program Scia Engineer, 3D model of the whole object was created. Analysis of internal forces for the rest of elements was carried out with help of manual calculation. Those elements were designed with consideration of ultimate limit state. Serviceability limit state assessment was carried out within the truss.
|
|
|
Technological stage of assembly load-bearning construction of building of secondary school
Tacina, Marek ; Bravenec, Roman (referee) ; Diaz, Yvetta (advisor)
The subject of this thesis is the design of the supporting frame structures in MS-OB. Construction is divided into two phases - red and blue. Blue phase focuses on the objects A, B1, B2 and red stage focuses on objects C1, C2, D1, D2, D3. In this work it is addressed, through a technical report, the situation of buildings, building equipment, budget, schedule, technological progress in construction, design of mechanical assemblies, KZP and Safety solved the technological stage.
|
|
|
Constructive technological project of reconstruction
Tacina, Marek ; Kopecký, Lukáš (referee) ; Diaz, Yvetta (advisor)
The subject of my thesis is to implement the gross carrying construction of the new bakery Karlovy pekarny in Židlochovice. In this paper dealt with the technical report, the situation of buildings, building equipment, budget, schedule, technological procedure of construction (bored piles and assembled skeleton), mechanical design and assembly KZP.
|
|
|
Prefabricated concrete structure
Šimon, Jan ; Šulák, Pavel (referee) ; Bažant, Zdeněk (advisor)
The master thesis is about a design of supporting structure of prefabricated skeleton hall. The major part of a design are an internal trasverse and longitudinal frames, which contents roof reinforce concrete truss, columns, beam and ceiling joists. All the load acting to the bearing structure is transferred to the prefabricate footing made of reinforce concrete. Other parts of the bulding are not solved in this thesis. The content of the thesis consists of an assembly drawing of parts of the skeleton and the static calculation according to the actual international standards. The output of each static calculation is drawing of a shape of part and its reinforcement.
|
|
|
Assembled structure of hall in Vysoke Mýto
Jarmara, Pavel ; Chalivopulos, Paris (referee) ; Zich, Miloš (advisor)
The diploma thesis is focused on design and assessment of mounted storage hall. I have designed prestressed truss, reinforced truss, beam, column and foundation pad. I have made calculations for consideration of ultimated limit state as well. I have made analysis of internal forces for beams just with manual calculations. Analyses of internal forces for column and foundation pad were found with Scia Engeneer. All calculations are following the Eurocode 2. All designed elements have formwork drawing and reinforcement drawing.
|
|
|
Assembled structure of hall in Vysoke Mýto
Jarmara, Pavel ; Chalivopulos, Paris (referee) ; Zich, Miloš (advisor)
The diploma thesis is focused on design and assessment of mounted storage hall. I have designed prestressed truss, reinforced truss, beam, column and foundation pad. I have made calculations for consideration of ultimated limit state as well. I have made analysis of internal forces for beams just with manual calculations. Analyses of internal forces for column and foundation pad were found with Scia Engeneer. All calculations are following the Eurocode 2. All designed elements have formwork drawing and reinforcement drawing.
|
|
|
Storage hall
Osyková, Martina ; Šulák, Pavel (referee) ; Laníková, Ivana (advisor)
The master thesis ´´Storage hall” deals with designing of selected elements prefabrikated skeleton hall. Discussed elements are truss, beam, girder, column and prefabricate footing. Within above mentioned elements was carried out static analysis, design of reinforcement and reinforcement drawings. Analysis of internal forces for columns and prefabricate footing was carried out with usage of the program Scia Engineer, 3D model of the whole object was created. Analysis of internal forces for the rest of elements was carried out with help of manual calculation. Those elements were designed with consideration of ultimate limit state. Serviceability limit state assessment was carried out within the truss.
|
|
|
Constructive technological project of reconstruction
Tacina, Marek ; Kopecký, Lukáš (referee) ; Diaz, Yvetta (advisor)
The subject of my thesis is to implement the gross carrying construction of the new bakery Karlovy pekarny in Židlochovice. In this paper dealt with the technical report, the situation of buildings, building equipment, budget, schedule, technological procedure of construction (bored piles and assembled skeleton), mechanical design and assembly KZP.
|
|
|
Prefabricated concrete structure
Šimon, Jan ; Šulák, Pavel (referee) ; Bažant, Zdeněk (advisor)
The master thesis is about a design of supporting structure of prefabricated skeleton hall. The major part of a design are an internal trasverse and longitudinal frames, which contents roof reinforce concrete truss, columns, beam and ceiling joists. All the load acting to the bearing structure is transferred to the prefabricate footing made of reinforce concrete. Other parts of the bulding are not solved in this thesis. The content of the thesis consists of an assembly drawing of parts of the skeleton and the static calculation according to the actual international standards. The output of each static calculation is drawing of a shape of part and its reinforcement.
|
|
|
Technological stage of assembly load-bearning construction of building of secondary school
Tacina, Marek ; Bravenec, Roman (referee) ; Diaz, Yvetta (advisor)
The subject of this thesis is the design of the supporting frame structures in MS-OB. Construction is divided into two phases - red and blue. Blue phase focuses on the objects A, B1, B2 and red stage focuses on objects C1, C2, D1, D2, D3. In this work it is addressed, through a technical report, the situation of buildings, building equipment, budget, schedule, technological progress in construction, design of mechanical assemblies, KZP and Safety solved the technological stage.
|
guest ::
