|
|
Structural design of the industrial building for increased loads
Landa, Tomáš ; Olšák, Martin (referee) ; Klusáček, Ladislav (advisor)
The bachelor thesis deals with the design of a ceiling structure for a load of 15 kN/m2. The design was prepared on the basis of the submitted documents. A preliminary design of the structure and its elements was developed for the given problem. The structural analysis was performed in SCIA Engeneer software system (including manual control by simplified method). The result of this bachelor thesis is a static calculation and design documentation of the designed structures.
|
|
|
Reinforced concrete structure
Hubačková, Pavlína ; Jeneš, Rostislav (referee) ; Šulák, Pavel (advisor)
My bachelor thesis focuses on the design of selected parts of monolithic reinforced concrete structures of a department store. Elements for design are locally supported ceiling sab, column and foundation pad. The calculation of internal forces was performed in a computational program SCIA Engineer 17. The Results of the software are compared with the result of the simplified manual method. The settlement of foundation was performer in program GEO 5. A graphical documentation of selected elements is also a part of the thesis. The construction is designed and assessed according to ČSN EN 1992 - 1 - 1.
|
|
|
Static analysis of moving skyscraper
Jedlička, Michal ; Martinásek, Josef (referee) ; Vlk, Zbyněk (advisor)
The thesis is about static analysis of moving skyscraper (inspired by The Dynamic Tower). There is a rotation of each particular floor around its axis independently on each other. In this thesis, moving skyscraper is solved as a whole piece with specialization in the moving floors and their mounting on the core of the building.
|
|
|
Reinforced concrete structure of a administrative building
Januš, Ondřej ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The main subject of this bachelor thesis is focused on the design of reinforced concrete locally supported slab of a multifunction building. Internal forces are calculated by a computer software SCIA Engineer and its resultes are compered with simplifield method. Another part includes the design of a reinforced concrete stairway and a column situated in the center of the disposition. The calculation method is based on ČSN EN 1992-1-1.
|
|
|
Superstructure of the backpart of the family house
Jetmar, Ondřej ; Šulák,, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis accommodates a design of a slab made out of reinforced concrete. On one side, the slab overhangs the load-bearing mansonry. The thesis comprises two solutions. In the first solution, the overhung part of the slab is not supported while in the second solution is this part locally supported by pillars. The thesis contains two variants of the slab design and also evaluation of the results.
|
|
|
Reinforced concrete structure of administrative building
Hejl, Zbyněk ; Požár, Michal (referee) ; Šulák, Pavel (advisor)
My bachelor thesis focuses on the design of selected parts of monolithic reinforced concrete structures of an administrative building. It is about a locally supported ceiling slab, an inner column and a staircase. Calculation of the internal forces was performed in the SCIA Engineer program and then verified by a hand method. The construction is assessed according to ČSN EN 1992 - 1 - 1.
|
|
| |
|
|
Static solution of parking house
Rose, Dominik ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The bachelor's thesis is focused on the elaboration of a static solution of a parking house with four above-ground floors. Three variants are elaborated, one of which was elaborated in more detail. The proposed elements are the ceiling slab, the columns and staircase. The SCIA Engineer 20.0 program is used to calculate the internal forces. As part of the work, drawing documentation is also prepared. The structure is designed according to correctly valid standards.
|
|
|
Precast concrete frame construction
Hubačková, Pavlína ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
Diploma thesis focuses on the design of selected parts of precast concrete frame construction. Elements for design are prestressed girder, purlin, column, footing pocket and drilled pile. The calculation of internal forces was performed in a computational program SCIA Engineer 18. Check of the pile was performed in program GEO 5. Part of the thesis is a technical report and formworks drawing and reinforcement drawing. The construction is designed and assessed according to ČSN EN 1992 - 1 - 1.
|
|
|
Static analysis of the roof structure
Meissnerová, Sabina ; Hokeš, Filip (referee) ; Vlk, Zbyněk (advisor)
This bachelor thesis deals with analysis of roof of a nursery school and comparing few calculation models. Model was created according to provided foundations in program Dlubal RFEM 6.01. The load of the contruction was created due to valid norms. Created models were evaluate to limit state of load capacity, where the results were compared with manual calculation and on limit state of usability.
|
guest ::
