|
|
Active Filters and their Transformation to Differential Structures
Bečková, Zuzana ; Herencsár, Norbert (referee) ; Vrba, Kamil (advisor)
Bachelor thesis is considered with transformation of single--ended frequency filters to fully--differential structures. Theoretical part contains a brief introduction to frequency filters and short summary of important features of signal flow graphs. Active elements, which are used in designed filters, are shown in the third chapter. Practical part of the thesis shows five single-ended filters (one already published, four newly designed) and their transformation to fully-differential structures. Results of simulations in programms OrCAD and SNAP are shown.
|
|
|
Fully-differential frequency filters with nontraditional active elements
Dvořák, Jan ; Koton, Jaroslav (referee) ; Jeřábek, Jan (advisor)
Bachelor's thesis deals with designs of fully-differential frequency filters which operate in current mode where it is possible to control their parameters by change the transconductance or the amplification. The first part divides and describes in general frequency filters. Furthermore, there are described active elements together with their simple simulation models. The second part describes the design of frequency filter by M-C signal-flow graph and methods of transforming final circuit to fully-differential structure. Next part presents several structures of the second-order filter with their simulations in non-differential and fully-differential forms. Last part presents designs of boards of printed circuits and measurement results of two chosen circuits.
|
|
|
Analysis of differential and non-differential filtering structures with adjustable current amplifier
Dvořák, Jan ; Vrba, Kamil (referee) ; Jeřábek, Jan (advisor)
The master thesis deals with designs of the single-ended and the fully-differential secondorder frequency filters with adjustable parameters. This filters operate in the current mode where main element is the current amplifier DACA (Digitally Adjustable Current Amplifier). The first part describes basic behaviour of frequency filters and distribution according to filter funcion, used parts and structure. The second part of thesis describes the design of the frequency filters by the M-C signal-flow graphs and the transformating single-ended structures to the fully-differential forms. The next part deals with properties of the active elements and their simulation models. The following part describe six circuits of the frequency filters with adjustable parameters and their simulations. Four simulation models with different properties were used for simulating of the DACA in the each circuits. The last part deals with the practical design and measurement of the selected frequency filters.
|
|
|
Application possibilities of LNVGA programmable amplifier
Sobotka, Josef ; Hanák, Pavel (referee) ; Jeřábek, Jan (advisor)
This thesis deals with the theoretical description of the qualitative characteristics and parameters of some modern active elements, also discusses the theory of signal flow graphs at the level applicable for the following frequency filter design methods. The thesis is also generally discussed the issue with the circuit simulator PSpice modeling theory and voltage amplifiers on the basic 6-levels. The practical part of the work is divided into two parts. The first practical part is dedicated to design four levels of simulation model of components LNVGA element. The second practical part contains detailed theoretical proposals for three circuit structures implementing the frequency filters 2nd order (based on the basic structure of the OTA-C) using signal flow graphs with configuration options of Q and fm based on the parameters of active elements in the peripheral structure and their verification with prepared LNVGA model layers.
|
|
|
Application possibilities of controllable current amplifier
Bradáč, Josef ; Koton, Jaroslav (referee) ; Jeřábek, Jan (advisor)
This thesis deals with the application using digitally controlled current amplifiers DACA (Digitally Adjustable Current Amplifer), which was developed at the Department of Telecommunications FEEC in cooperation with ON Semiconductor in 2010. In introduction is decribed the topic of active filters and oscillators. Farther active current components, besides DACA are described current conveyor UCC (Universal Current Conveyor), current amplifier DO-CF (Dual-Output Current Follower), MO-CF (Multiple-Output Current Follower) and FD-CF (Fully Diferential Current Follower) and operational transconductant amplifier BOTA (Balanced-Output Operational Transconductance Amplifer) and MOTA (Multiple-Output Operational Transconductance Amplifier). The following is a compilation of theories circuits using signal flow graphs, which are designed using a simulated filter circuits to control the cutoff frequency or the quality factor. Then design and simulation with auxiliary oscillator circuit AGC for controlling the oscillation frequency. Simulations are conducted with ideal models and with models that include some real properties. The conclusion of this work is devoted to the printed circuit board design for a selected filter circuit realization and measurement.
|
|
|
Active Filters and their Transformation to Differential Structures
Bečková, Zuzana ; Herencsár, Norbert (referee) ; Vrba, Kamil (advisor)
Bachelor thesis is considered with transformation of single--ended frequency filters to fully--differential structures. Theoretical part contains a brief introduction to frequency filters and short summary of important features of signal flow graphs. Active elements, which are used in designed filters, are shown in the third chapter. Practical part of the thesis shows five single-ended filters (one already published, four newly designed) and their transformation to fully-differential structures. Results of simulations in programms OrCAD and SNAP are shown.
|
|
|
Fully-differential frequency filters with nontraditional active elements
Dvořák, Jan ; Koton, Jaroslav (referee) ; Jeřábek, Jan (advisor)
Bachelor's thesis deals with designs of fully-differential frequency filters which operate in current mode where it is possible to control their parameters by change the transconductance or the amplification. The first part divides and describes in general frequency filters. Furthermore, there are described active elements together with their simple simulation models. The second part describes the design of frequency filter by M-C signal-flow graph and methods of transforming final circuit to fully-differential structure. Next part presents several structures of the second-order filter with their simulations in non-differential and fully-differential forms. Last part presents designs of boards of printed circuits and measurement results of two chosen circuits.
|
|
|
Application possibilities of controllable current amplifier
Bradáč, Josef ; Koton, Jaroslav (referee) ; Jeřábek, Jan (advisor)
This thesis deals with the application using digitally controlled current amplifiers DACA (Digitally Adjustable Current Amplifer), which was developed at the Department of Telecommunications FEEC in cooperation with ON Semiconductor in 2010. In introduction is decribed the topic of active filters and oscillators. Farther active current components, besides DACA are described current conveyor UCC (Universal Current Conveyor), current amplifier DO-CF (Dual-Output Current Follower), MO-CF (Multiple-Output Current Follower) and FD-CF (Fully Diferential Current Follower) and operational transconductant amplifier BOTA (Balanced-Output Operational Transconductance Amplifer) and MOTA (Multiple-Output Operational Transconductance Amplifier). The following is a compilation of theories circuits using signal flow graphs, which are designed using a simulated filter circuits to control the cutoff frequency or the quality factor. Then design and simulation with auxiliary oscillator circuit AGC for controlling the oscillation frequency. Simulations are conducted with ideal models and with models that include some real properties. The conclusion of this work is devoted to the printed circuit board design for a selected filter circuit realization and measurement.
|
|
|
Analysis of differential and non-differential filtering structures with adjustable current amplifier
Dvořák, Jan ; Vrba, Kamil (referee) ; Jeřábek, Jan (advisor)
The master thesis deals with designs of the single-ended and the fully-differential secondorder frequency filters with adjustable parameters. This filters operate in the current mode where main element is the current amplifier DACA (Digitally Adjustable Current Amplifier). The first part describes basic behaviour of frequency filters and distribution according to filter funcion, used parts and structure. The second part of thesis describes the design of the frequency filters by the M-C signal-flow graphs and the transformating single-ended structures to the fully-differential forms. The next part deals with properties of the active elements and their simulation models. The following part describe six circuits of the frequency filters with adjustable parameters and their simulations. Four simulation models with different properties were used for simulating of the DACA in the each circuits. The last part deals with the practical design and measurement of the selected frequency filters.
|
|
|
Application possibilities of LNVGA programmable amplifier
Sobotka, Josef ; Hanák, Pavel (referee) ; Jeřábek, Jan (advisor)
This thesis deals with the theoretical description of the qualitative characteristics and parameters of some modern active elements, also discusses the theory of signal flow graphs at the level applicable for the following frequency filter design methods. The thesis is also generally discussed the issue with the circuit simulator PSpice modeling theory and voltage amplifiers on the basic 6-levels. The practical part of the work is divided into two parts. The first practical part is dedicated to design four levels of simulation model of components LNVGA element. The second practical part contains detailed theoretical proposals for three circuit structures implementing the frequency filters 2nd order (based on the basic structure of the OTA-C) using signal flow graphs with configuration options of Q and fm based on the parameters of active elements in the peripheral structure and their verification with prepared LNVGA model layers.
|
guest ::
