|
|
LED bicycle lights
Čmelík, Matouš ; Patočka, Miroslav (referee) ; Huták, Petr (advisor)
In semester thesis i project bicycle lighting using LEDs that are powered from the alternator. The LEDs are powered also from battery, that is recharged while driving and when you stop it enable uninterrupted lighting. The concept is designed so that the final price is as low as possible. All things is designed to insert to the existing bicycle lightint on Eska or Favorit bicycle. The use of inverters ensures high efficienty of the whole concept. Using LEDs compare to standart solutions with bulbs is more efficienty to.
|
|
|
Switch mode supplies
Hladík, Jan ; Martiš, Jan (referee) ; Patočka, Miroslav (advisor)
This thesis deals with the design of switched power supply for laboratory lessons. Forward converter was chosen as the topology of this power supply. Output voltage is adjustable from 0 V to 32 V. Power supply is capable of output current up to 10 A and output has adjustable current limiting. Following parts were designed: LC filter, pulse transformer, bridge rectifier with capacitor, power MOS-FETs driver, closed loop control with its auxiliary power supply. Cascade closed loop control is used for controlling of designed power supply. Control is analogue, operation amplifiers were used for its construction. PCB was designed for the whole power supply. Power supply was sucessfully assembled and tested.
|
|
|
Step-up switched power source
Žamberský, Jan ; Boušek, Jaroslav (referee) ; Pavlík, Michal (advisor)
Práce se zabývá popisem jednotlivých typů zdrojů s důrazem na izolované topologie. Poté je rozebírána nejvhodnější volba pro zdroj na anodické bondování, kde jsou kladeny požadavky na vysoké výstupní napětí s malým proudem. Další část rozebírá problematická místa návrhu a na co je třeba dávat pozor. Poté je proveden vlastní návrh zdroje s popisem optimalizačních kroků. Tento zdroj je odsimulován. Dva rozdílné přístupy k realizaci takového zdroje jsou poté porovnány a nejlepší je vybrán. Je ukázána možnost, jak realizovat bipolární výstup. V poslední části je tento zroj sestaven a proměřeny jeho parametry.
|
|
| |
|
| |
|
|
Usage of High Power Inverters in High Voltage Sources
Zemánek, Miroslav ; Janča, Jan (referee) ; Boušek, Jaroslav (referee) ; Patočka, Miroslav (advisor)
This work is concerned with power inverters for alternate high voltage power sources. The theoretical part describes the topology of inverters that can be used in alternate power sources. A model of voltage transformer is described in details to better understand the parasitic effects that are inevitably present in high voltage power sources and, therefore, have to be taken into consideration at the design of high voltage power sources. The work is oriented to problems of alternate high voltage power sources for ozone generators. This is the reason, why the theoretical and, partially, also the experimental part deal with the properties of ozone and its use. The experimental part solves high voltage inverter with capacitive load that is formed by discharge element of an ozone generator. Designed inverter is able to feed the capacitive load with high voltage at very short periods of time from several microseconds up to tens of nanoseconds. In comparison with the length of voltage pulses in common ozone generators, this pulses are more than 100-time shorter. This has a positive effect to silent discharge characteristics.
|
|
| |
|
|
Experimental flyback switching supply 1200 W/150 kHz with SiC switches
Grom, Martin ; Huták, Petr (referee) ; Vorel, Pavel (advisor)
This master’s thesis deals with design and construction of experimental flyback converter with utilization of novel lossless clamp circuit for switching transistor and with utilization of silicon carbide devices. The issue of flyback converter for higher power and possible control strategies are discussed. The thesis also describes power and control circuits design, design of PCB, construction of the converter and measured waveforms. End of the thesis contains technical documentation of designed board. Designed converter was successfully built and tested.
|
|
|
General-purpose power supply with microcontroller
Jorda, Ivo ; Vyskočil, Pavel (referee) ; Brančík, Lubomír (advisor)
The aim of this thesis is design of adjustable switched mode power supply with symmetrical output of 25 V, and switched mode power supply with fixed output voltage of 5 V. Required maximum output current of each outputs is 3 A. At the beginning of the paper function of the basic SMPS topologies is described. Next all reqiured SMPSs are designed and chosen parts of the design are simulated. In the second half of the thesis assembly and testing of PCB are described as well as functions of programs. Last chapter contains results of meassurement of power supply paramters.
|
|
|
Li-ion accumulators charger
Vrba, Marek ; Zatloukal, Miroslav (referee) ; Garcia, Juan Bautista Arroyo (advisor)
The main target of this thesis is to design and realize a prototype of a high capacity battery charger. The charger has been designed as a switching power supply based on a Flyback convertor with two transistors. As switching transistors the integrated circuit IR2110 has been selected. The convertor is controlled by a microcontroller board based on ATMega328 called Arduino Uno; some parts of the Arduino Uno Starter Kit are also used as LCD display, relay and button. In addition, an auxiliary source has been made; this one powers the integration circuit IR2110 and Arduino Uno board. Furthermore, this work introduces us to the processes of charging lithium batteries, types of lithium batteries and methods of charging the lithium iron phosphate (LiFePO4) battery.
|
guest ::
