|
|
Civic amenities building
Plášková, Věra ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The thesis deals with the design of a two-storey L-shaped smart building for amenities with a low energy consumption concept in mind. The ground floor will be used as a café and technical facilities. The second floor is designed for a small design office. The first part of the thesis is devoted to the architectural and structural design. The selected load-bearing system is a wall system made of Silka sand-lime blocks. The floor and roof are designed of prestressed reinforced concrete panels Spiroll. Stone wool is used as the main thermal insulation. The flat roof is designed green extensive. The second part of the thesis deals with the building environment technology, which will use energy from photovoltaic panels and will be supplied with heat from a local central heat source. Air exchange is provided by two HVAC units. Cooling is designed as a VRF system with refrigerant. The third part of the thesis deals with the acoustic assessment. The main topic is optimizing the reverberation time in the open space office. For the preparation of the thesis, the Archicad and Autocad software, MS Excel and Word or Deksoft were used.
|
|
|
Civic amenities building
Svoboda, David ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of the master’s thesis is the design of a new music club building in Valtice. The first part of the thesis is the architectural and structural design. The building of irregular rectangular shape with one underground floor and two above-ground floors is divided into two main operational units – a dance hall and a rock club. The chosen structural system is reinforced concrete columns with locally supported floors. The walls are made of sand-lime blocks. The main insulation material is hemp. The building is covered by a flat roof with extensive greenery. The second part deals with the building services. Ventilation, heating and cooling are provided by HVAC units. The heat source is condensing gas boilers, the cooling source is an outdoor VRV cooling unit. The third part of the master‘s thesis is the acoustic assessment of the building. As a noise source, it mainly addresses the acoustic impact on the surrounding buildings in the vicinity. Furthermore, it optimizes the reverberation time in the rock club. The project was produced in accordance with the legal regulations and technical standards and created in AutoCAD software.
|
|
|
Wellness Čeladná
Kozumplíková, Markéta ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The aim of this master thesis is to design a low-energy building for civic amenities, specifically the design of a recreational wellness centre. The building has an L-shaped floor plan with a flat roof and is designed with two above ground and one underground floor. The ground floor will serve as a wellness centre with a swimming pool and saunas. Massages and solariums are proposed on the 2nd floor. Technical facilities are located in the basement. The first part of the thesis is devoted to the architectural and structural design. Structurally, the building is divided into two parts. The part of the administrative facilities and the massage rooms consists of a construction of the character of a transverse wall system made of cut brick blocks and insulated with ETICS. The internal masonry is designed in ceramic ground bricks. Ceiling structures are in the form of continuous reinforced concrete slab. The building is based on footings and waist foundations. The roof of the building is single-skin flat with a gravel. The wellness part is made up of a monolithic diaphragm skeleton with high slenderness columns. The horizontal load-bearing structure in this case again consists of a continuous monolithic reinforced concrete slab. The second part of the thesis deals mainly with the environmental engineering of the buildings. The building will be heated by a pellet boiler and will also use energy from photovoltaic panels. Ventilation in the building is provided by air handling units with heat recovery. The third part of the thesis deals with the assessment of solar gains in the indoor environment of the pool hall. Three variants are proposed with multi-criteria evaluation and the optimal option is selected. The thesis is mainly elaborated in Archicad, Deksoft, MS Excel and Word software.
|
|
|
Civic amenities building
Svoboda, David ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of the master’s thesis is the design of a new music club building in Valtice. The first part of the thesis is the architectural and structural design. The building of irregular rectangular shape with one underground floor and two above-ground floors is divided into two main operational units – a dance hall and a rock club. The chosen structural system is reinforced concrete columns with locally supported floors. The walls are made of sand-lime blocks. The main insulation material is hemp. The building is covered by a flat roof with extensive greenery. The second part deals with the building services. Ventilation, heating and cooling are provided by HVAC units. The heat source is condensing gas boilers, the cooling source is an outdoor VRV cooling unit. The third part of the master‘s thesis is the acoustic assessment of the building. As a noise source, it mainly addresses the acoustic impact on the surrounding buildings in the vicinity. Furthermore, it optimizes the reverberation time in the rock club. The project was produced in accordance with the legal regulations and technical standards and created in AutoCAD software.
|
|
|
Civic amenities building
Plášková, Věra ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The thesis deals with the design of a two-storey L-shaped smart building for amenities with a low energy consumption concept in mind. The ground floor will be used as a café and technical facilities. The second floor is designed for a small design office. The first part of the thesis is devoted to the architectural and structural design. The selected load-bearing system is a wall system made of Silka sand-lime blocks. The floor and roof are designed of prestressed reinforced concrete panels Spiroll. Stone wool is used as the main thermal insulation. The flat roof is designed green extensive. The second part of the thesis deals with the building environment technology, which will use energy from photovoltaic panels and will be supplied with heat from a local central heat source. Air exchange is provided by two HVAC units. Cooling is designed as a VRF system with refrigerant. The third part of the thesis deals with the acoustic assessment. The main topic is optimizing the reverberation time in the open space office. For the preparation of the thesis, the Archicad and Autocad software, MS Excel and Word or Deksoft were used.
|
|
|
Wellness Čeladná
Kozumplíková, Markéta ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The aim of this master thesis is to design a low-energy building for civic amenities, specifically the design of a recreational wellness centre. The building has an L-shaped floor plan with a flat roof and is designed with two above ground and one underground floor. The ground floor will serve as a wellness centre with a swimming pool and saunas. Massages and solariums are proposed on the 2nd floor. Technical facilities are located in the basement. The first part of the thesis is devoted to the architectural and structural design. Structurally, the building is divided into two parts. The part of the administrative facilities and the massage rooms consists of a construction of the character of a transverse wall system made of cut brick blocks and insulated with ETICS. The internal masonry is designed in ceramic ground bricks. Ceiling structures are in the form of continuous reinforced concrete slab. The building is based on footings and waist foundations. The roof of the building is single-skin flat with a gravel. The wellness part is made up of a monolithic diaphragm skeleton with high slenderness columns. The horizontal load-bearing structure in this case again consists of a continuous monolithic reinforced concrete slab. The second part of the thesis deals mainly with the environmental engineering of the buildings. The building will be heated by a pellet boiler and will also use energy from photovoltaic panels. Ventilation in the building is provided by air handling units with heat recovery. The third part of the thesis deals with the assessment of solar gains in the indoor environment of the pool hall. Three variants are proposed with multi-criteria evaluation and the optimal option is selected. The thesis is mainly elaborated in Archicad, Deksoft, MS Excel and Word software.
|
guest ::
