|
|
Energy efficient building of a family house in Šumperk
Máchová, Klára ; Počinková, Marcela (referee) ; Blasinski, Petr (advisor)
The aim of this bachelor's thesis is to design a modern two-storey single-family house that minimizes energy consumption. The site is located in a new development area in Šumperk. The focus of the work is on designing an earth-sheltered home for a family of four and maximizing the usage of a steep building site. The first floor, accessible from the northwest, comprises service areas such as a garage, workroom, and utility room. On the east side of this floor, there is a bathroom, guest bedroom, and family room, which also serves as a home wellness area. The primary living area occupies the left part of the second floor and leads directly to the terrace. The right section of this floor is the rest zone, including a master bedroom with an en suite bathroom and a walk-in closet, two children's bedrooms, a bathroom, and a separate toilet. The load-bearing walls consist of aerated concrete blocks and sand lime blocks insulated with EPS. The horizontal structures are designed from in-situ reinforced concrete, ensuring structural integrity. A flat green roof helps the building blend into its surroundings and accumulates a significant part of the rainwater. The remaining water is stored in an underground tank and is used for garden irrigation and watering plants. The main source for heating, cooling, and hot water preparation is an air-to-water heat pump. During the day, it is partly powered by photovoltaic panels on the roof and remains connected to the grid. Building services include underfloor heating, cooling via a fan coil system, and mechanical ventilation with heat recovery (MVHR). The energy performance certificate, categorized as A, is part of the documentation.
|
|
|
Energy-saving detached house in Bučovice
Šilerová, Zuzana ; Blasinski, Petr (referee) ; Počinková, Marcela (advisor)
The aim of the Bachelor’s thesis is to design near-ly zero-energy detached family house for a family of four. The thesis has two parts. The first part presents documentation for building permission. The second part presents the design of selected building services. The house is located on a flat plot in Bučovice. It is a two-storey square shape house with a flat green roof, a wooden terrace and a carport for two cars . On the ground floor, there is a social part, i.e. a living room connected to a kitchen, a study room, a bathroom, a toilet and a utility room. On the second floor, there is a private zone with a master bedroom, two children bedrooms, a bathroom, a toilet and a walk-in closet. The house is based on foam glass and a reinforced concrete foundation slab. The vertical structures are masonry made of aerated concrete blocks. The external walls are insulated with the ETICS.The horizontal load-bearing structures are made of cast in place reinforced concrete. The design building services contains the design of vetilation system, solutions for sewage and rainwater, electrical installation and heating. The work deals with the heating system in more detail. The main source of heat is air-water heat pump. The building will be heated by underfloor heating. The air exchange will be provided by the mechanical ventilation with heat recovery. Sewage will be treated in the domestic waste water treatment, clean water will be infiltrated in to the ground on the premises. Rainwater will be collected in storage tank and used for watering the garden. The thesis also includes assessment of fire safety, thermal, daylighting and acoustics. energy performance certificate. The building aslo has energy performance certificate and falls into the classification class A – extremely efficient
|
|
|
Energy-saving detached house at the Zaječí hora
Habrún, Ján ; Doležalová, Jana (referee) ; Počinková, Marcela (advisor)
The aim of the bachelor’s thesis is to design compact house for family with efficient orientation to maximise daylight in living spaces and with efficiently used energy including renewable sources. It is located in Brno – Sadová in new development area. This energy-saving detached house is two-storey building with attached garage, both with flat sedum roof. It is without cellar, so utility room is attached next to the garage and the position of this room is designed with consideration to minimize lengths of connections. On the ground floor is situated bathroom, WC, storage room, kitchen connected with living room and dining room, so it’s a social zone. On the first floor are two child’s rooms, bedroom, bathroom and study and that is a private zone. The vertical structures are masonry, made of aerated concrete blocks insulated by the ETICS system. Horizontal load-bearing structures are made of prestressed reinforced concrete. Part of documentation is aimed for building services. The main part includes heating system, another services like ventilation and rainwater management are designed as a concept. The building is designed with air-to-water heat pump as the main source of heating and preparing domestic hot water. The heat will be distributed throughout the building by floor heating. Mechanical ventilation with heat recovery is designed as ventilation system. The documentation also includes Energy Performance Certificate of the building.
|
|
|
Detached house, Červený Kostelec
Havel, Martin ; Struhala, Karel (referee) ; Kolář, Radim (advisor)
The aim of the bachelor thesis is the design of a nearly zero-energy detached house, which helps its inhabitants by its disposition and thought to maintain a healthy circadian rhythm. The building is located in Červený Kostelec. On the plot, the house is oriented with the idea of large solar gains, so with floor to ceiling windows facing south. The floor plan is T-shaped. the property has two floors and no basement. The load-bearing walls are made of aerated concrete. The floor slab consists of the Ytong Classic system slab. The open gable roof of the building is provided by truss wooden beams. On the first floor there is the main entrance, a large utility room, a separate toilet and a pantry. Then there is the entrance to the living room, which is directly connected to the kitchen. Children's rooms and bedrooms have east-facing windows. Rainwater from the roof is channeled into the storage tank. Excess rainwater is absorbed into the ground in the infiltration system. The property is connected to public sewer, electricity and public water supply. The house is heated and cooled by ceiling panels. The water is heated by an air-water heat pump. A fireplace insert with a hot-water exchanger is designed as a bivalent energy source. Photovoltaic panels on the roof are connected to batteries located in the utility room. Mechanical ventilation is proposed in the building. Total air exchange is 350 cubic meters per hour.
|
|
|
Energy-saving family house in Jablunka
Mrnuštík, Petr ; Vrána, Jakub (referee) ; Počinková, Marcela (advisor)
The bachelor’s thesis focuses on designing a low-energy detached house in village Jablunka. Thesis is divided into two parts, first one is aimed at structural and architectural design, whilst the second one focuses on building services, especially heating with solid fuels. The house is divided into a two-storey and a single-storey part. Ground floor includes master bedroom, utility room and mainly open-plan living room connected to kitchen which opens onto a deck and garden. First floor then includes two bedrooms and study. Both floors have their own bathrooms with separate toilets. Structural system is designed as masonry walls from aerated concrete blocks, which are transferring load onto plain concrete foundation strips. Floor slab is to be made of reinforced concrete. Two-storey part is covered by prefabricated rib–and–filler gable roof with 15° slope, from aerated concrete fillers and reinforced concrete, the one-storey part has flat roof. Walls are insulated by 140 mm of mineral wool, plinth then by 120 mm of XPS. Ground slab will be insulated by 220 mm of graphite EPS, floor slab is insulated by 40 mm of impact sound insulation from mineral wool and 50 mm of EPS with installation layer. Flat roof is insulated by 220–340 mm of mineral wool with screed to fall function. Gable roof is then insulated by 180 mm PIR panels. Rainwater will be collected and stored in rainwater tank for gardening use, overflow will then lead to drainage blocks, where the water can be absorbed into soil, with overflow into stormwater sewer system. Ventilation is designed equal pressure, mechanical with enthalpy heat recovery exchanger and heating battery covering ventilation losses. Main heating source is solid fuel boiler, storing its energy in 750liter hot water tank, from which is the heat distributed into 200liter domestic hot water tank, ventilation heating battery and heating elements such as convectors, panel and rail radiators. As renewable source of energy is designed photothermal panels which will mainly heat domestic hot water, excess heat will then be stored in hot water tank.
|
|
|
Family house with cinema room
Kurka, Štěpán ; Pobucká, Slávka (referee) ; Sobotka, Jindřich (advisor)
As part of the bachelor's thesis, project documentation was developed at the construction implementation level within the partially required scope. The documentation includes a project for a family house located in the northern part of the village of Kobeřice in Silesia. The new building is integrated into an already developed area of the village and is set into the terrain, taking advantage of the sloping land for the operational solution. The building is designed as a single dwelling unit for permanent residence by five people, with technical facilities and garage space. Access to the dwelling unit is provided from the west side to the first above-ground floor. From a material perspective, the building is designed using predominantly ceramic blocks for both load-bearing and non-load-bearing vertical structures. The building envelope is insulated with an ETICS system to reduce energy consumption. The construction is based on monolithic foundation strips with a base concrete slab. The ceiling structures in the building are made of monolithic reinforced concrete slabs. The building is roofed with two flat single-layer roofs at different height levels. The roof at the lower level is designed with a vegetative surface finish.
|
|
|
New lightweight floors with secondary raw materials
Tůmová, Eva ; Bydžovský, Jiří (referee) ; Ďurica,, Tibor (referee) ; Kolář,, Karel (referee) ; Drochytka, Rostislav (advisor)
The thesis deals with the development of new type of lightweight floors based on secondary raw materials. In the introduction, the current knowledge in the field of lightweight building materials, especially screeds and lightweight porous concrete, is presented. The thesis describes brief history of production of aerated concrete and its development up to the present. Further, the thesis describes the procedure of design and testing of new lightweight materials for use in floors. The proposed recipe has been thoroughly tested and the best combination of components for use in lightweight porous concrete floor screed has been selected. The thesis also examines the microstructure of the material being developed. The main result of the dissertation is the developed product, which is already used in practice and is produced and sold on the market as part of the system of lightweight building materials.
|
|
|
Storage area with administrative building
Šesták, Tomáš ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This master thesis focused on the design and elaboration of project documentation for the purpose of a storage area with an administrative building, consisting of the premises SO 01 - storage hall and SO 02 - administrative building. Objects are located on parcels no. 4006/16, 4006/17, 4006/18, 4006/19, 4006/23, 4006/24, 4006/26, 4006/27, 4006/28, 4006/29, 4006/30, 4006/31, 4006/32, in the cadastre unit Dolní Bojanovice. They are located on an investor's land. Traffic connection is provided by the exit from the car park on the local road. All engineering infrastructure engineering networks are located near the site. The design of the building respects the local zoning plan. Project documentation is prepared in accordance with the current wording of applicable laws, decrees and standards. The project solves the structure functionally divided into objects SO 01 and SO 02, which are both operationally and structurally connected. The construction of objects is statically independent. The object SO 01 is designed for the storage of building material intended for storage in dry rooms. In addition to the storage space there is the air-conditioning machine room. The SO 02 facility serves administrative and staffing facilities. In the basement of the building there are rooms of technical background and archives. The SO 01 is designed as a full-metal mounted object with a counter roof and foundation pads. The design system of the SO 01 object is columnar with steel columns. The SO 02 building is designed from a wall construction system made of aerated concrete blocks with reinforced concrete ceilings, base strips and a flat roof. The SO 01 has a 65.5x20.2 m ground plan. The perimeter shell of the building consists of assembled sandwich panels with a core of pure material. The largest ground plan dimensions of the so 02 are 26.75x10.35 m. The perimeter shell is made up of 375 mm piece concrete blocks with a 150 mm contact system.
|
|
|
Social housing, Brno
Krbylová, Alžbeta ; Krupica, Roman (referee) ; Sátora, Josef (advisor) ; Petříček, Tomáš (advisor)
The project of social housing in Brno – city part of Malomerice, is especially aimed at Roma community as well as other families with more members. Designed objects are situated along the borders of site to create semiprivate space for playing and community action in proposed community centre. Houses are designed to accomplish owner´s demands as it creates the diversity of terraced houses. The base of every design is unit (distinguished by gable roof) with entry space, staircase, technical and hygienic core. According to wishes, there were created number and location of rooms (with mono-pitched roof). Therefore in detailed house, there are rooms for up to 10 people with open kitchen and living room. Within the incorporation of minority community to society and improvement of their starting position in labour market it is taking into account with construction of dwellings by their owners with supervision under experienced craftsmen. Due to their simplicity and availability as main material for construction were chosen aerated concrete blocks YTONG. Façade is mostly made of basic white plaster with ability of choosing the colour in part with gabled roof.
|
|
|
Possibilities for testing and improving the durability of aerated concrete
Klaudová, Dana ; Voves, Jiří (referee) ; Hubáček, Adam (advisor)
This master´s thesis studies qualities of aerated concretes, is monitoring influenece concrete composition, quantity of aerating admixture and plasticized admixture on the durability of concrete. It is monitored especially air flow and his influence on durability on concrete. In theoretical part are explained mechanisms of damage concrete, phenomena, which influence compressive strength of concrete and then there are the results of resistance against the influence of chemical defrosting substances. In experimental work were designed, mixed and tested recipe of concerete. We investigated different atribute, especially resistance of the chemical defrosting and air flow in hardened concrete. The result of master´s thesis is effect of flow air in concrete on the durability.
|
guest ::
