|
Preparation of the implementation of the gross substructure of the multifunctional building SW - TRADE
Mikeštík, Lukáš ; Vlčková, Jitka Laura (referee) ; Průcha, Aleš (advisor)
The aim of this bachelor's thesis is the planning of the implementation of the rough substructure of the SW-TRADE multifunctional building. The work focuses on the technological regulation for the entire rough substructure, for which an inspection and test plan, a time schedule, and an itemized budget will be created. It also contains the coordination situation of the construction in the context of wider transport relations, the design of machine assemblies, the organizational principles of construction with a drawing of the construction site equipment, and an emphasis on safety and health protection at work. For this phase, details regarding the construction of the white tub and gabion perimeter wall, and the balance of resources, specifically workers, are also worked out.
|
|
The mourning ceremony Hall Lisen
Kaliariková, Beáta ; Hrabec, Josef (referee) ; Šindlar, Jiljí (advisor) ; Pěnčík, Jan (advisor)
The theme of the project was to design a new mourning hall. The building is extending the cemetery that already exists and is situated on neighbouring plot. The new building is supposed to extend the possibilities and capacities of the cemetery. The plot is delimited by the street Šimáčkova. It is surrounded by groungs and the edge of forest from the other sides. There are no buidlings on the plot. It is green and includes green vegetation. The new building is supposed to offer space where mourning ceremonies and related functions like organisation and preparation of funeral could take place. Apart from the building the project contains also planned extension of cemetery area. The capacity of graves will be increased and extended by columbaria which will be situated around shelter for meditation. The new parking area will be created for visitors of ceremonies and cemetery. The building is situated in a back part of plot. Besides the access pavements also service roads will be created for employees and funeral car. Individual parts will be separated by leaf green so that they will not interrupt each other. My intention in the solution of form was to accentuate the space of the mourning hall. This part of building is higher than other side parts which are meant to be used as service parts.The solution is emphasized by lengthened monolith walls. The building has only one floor and the roof is flat. It is positioned at one level. The ground plan is irregular and created from rectangular shapes.
|
|
Apartment Building in Poděbrady
Hlídková, Jana ; Král, Jakub (referee) ; Pěnčík, Jan (advisor)
This bachelor thesis deals with a draft of an apartment building in Poděbrady. A corner building site that is about 1 km north of the city centre was chosen for the apartment building. It is a four-storey building with a basement, it has an irregular shape, where some walls are not rectangular, and it is covered with a green roof. There are 16 apartments of various sizes on the above floors, and a utility room and a cellar can be found in the basement of the house. Considering the shape and layout solutions, the vertical and horizontal supporting structures are made of reinforced concrete. The perimeter walls are compositely insulated with basalt wool and plastered with a scratched façade plaster of creamy and grey-brown colour. Internal non-load-bearing walls are made up according to the Ytong system. The window openings are filled with wood-aluminium windows and the entrance doors are made of aluminium. The building is based on a reinforced concrete baseplate. The apartment building is designed with respect to the surrounding area. The bachelor thesis also includes assessments in terms of fire risk, energy saving and heat protection, acoustics and vibrations, lighting and sunlight.
|
|
Villa in a hillside
Zemánek, Jaroslav ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
The content of this thesis is elaboration of technical documentation for realization of a new villa in a hillside. The building is situated in Čejkovice village in steep terrain. It has two floors and a flat roof. The structural system of the building is created of structural concreate and of ceramic blocks HELUZ, ceiling structure is of prestressed concrete. There are two parking spaces infront of the house.
|
|
Apartment Building in Poděbrady
Hlídková, Jana ; Král, Jakub (referee) ; Pěnčík, Jan (advisor)
This bachelor thesis deals with a draft of an apartment building in Poděbrady. A corner building site that is about 1 km north of the city centre was chosen for the apartment building. It is a four-storey building with a basement, it has an irregular shape, where some walls are not rectangular, and it is covered with a green roof. There are 16 apartments of various sizes on the above floors, and a utility room and a cellar can be found in the basement of the house. Considering the shape and layout solutions, the vertical and horizontal supporting structures are made of reinforced concrete. The perimeter walls are compositely insulated with basalt wool and plastered with a scratched façade plaster of creamy and grey-brown colour. Internal non-load-bearing walls are made up according to the Ytong system. The window openings are filled with wood-aluminium windows and the entrance doors are made of aluminium. The building is based on a reinforced concrete baseplate. The apartment building is designed with respect to the surrounding area. The bachelor thesis also includes assessments in terms of fire risk, energy saving and heat protection, acoustics and vibrations, lighting and sunlight.
|
|
Villa in a hillside
Zemánek, Jaroslav ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
The content of this thesis is elaboration of technical documentation for realization of a new villa in a hillside. The building is situated in Čejkovice village in steep terrain. It has two floors and a flat roof. The structural system of the building is created of structural concreate and of ceramic blocks HELUZ, ceiling structure is of prestressed concrete. There are two parking spaces infront of the house.
|
|
The mourning ceremony Hall Lisen
Kaliariková, Beáta ; Hrabec, Josef (referee) ; Šindlar, Jiljí (advisor) ; Pěnčík, Jan (advisor)
The theme of the project was to design a new mourning hall. The building is extending the cemetery that already exists and is situated on neighbouring plot. The new building is supposed to extend the possibilities and capacities of the cemetery. The plot is delimited by the street Šimáčkova. It is surrounded by groungs and the edge of forest from the other sides. There are no buidlings on the plot. It is green and includes green vegetation. The new building is supposed to offer space where mourning ceremonies and related functions like organisation and preparation of funeral could take place. Apart from the building the project contains also planned extension of cemetery area. The capacity of graves will be increased and extended by columbaria which will be situated around shelter for meditation. The new parking area will be created for visitors of ceremonies and cemetery. The building is situated in a back part of plot. Besides the access pavements also service roads will be created for employees and funeral car. Individual parts will be separated by leaf green so that they will not interrupt each other. My intention in the solution of form was to accentuate the space of the mourning hall. This part of building is higher than other side parts which are meant to be used as service parts.The solution is emphasized by lengthened monolith walls. The building has only one floor and the roof is flat. It is positioned at one level. The ground plan is irregular and created from rectangular shapes.
|