|
Elementary school
Králíková, Zuzana ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
Diploma thesis solves the design of the elementary school. The building is situated in Letohrad in region Pardubice. The design of the school building contains small sport hall for pupils and for possible public access. Dinning room and the kitchen are the parts of the building. The object is designed as structural masonry system, ceramic bricks with external thermal insulation composite system. Building does not have a basement. The object is divided to three parts, teaching part, dining room with kitchen and sports hall with facilities. The building has two-storey in the teaching part, the remaining part is a single-storey with vegetation roof. All roofs are designed as a warm flat roof. The building is designed for capacity 150 pupils. Building ventilation is provided by air-conditioning equipment. Entrance to the building is barrier-free, it is installed a building elevator inside.
|
| |
| |
|
Simulation of heating and cooling loads of the A1 building and the analysis of energy saving measures
Bartoník, Adam ; Kolbábek, Antonín (referee) ; Charvát, Pavel (advisor)
This thesis deals with the heat loss and the heat loads simulation of A1 building in the area of The Faculty of Mechanical Engineering, Brno University of Technology and with the measures of the energy saving. The measures of the thermo-technical charakteristics for the winter and summer operations are provided on the base of the current state simulation. These measures include increasing of thermal resistence (of the building case), the radiation shielding, the sun blinds and the passive cooling by the night ventilation. All the simulation are performed in TRNSYS 16.1 software.
|
|
Solution Technology for Manufacturing "Slats"
Lamich, Štěpán ; Jaroš, Aleš (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis deals with a technology problem of the blind slat production. The work describes the slat production in the automatic rolling mill TPLv4 made by ISOTRA a.s. It aims to find the critical point of the production and suggest a new manufacturing technique/procedure. In conclusion, the thesis evaluates the proposed manufacturing procedure from technical and economical point of view.
|
|
The Book in Space
Valášková, Kateřina ; Binder, Ivo (referee) ; Kocman, Jiří Hynek (advisor)
This final work is focused on the space and light and its screening by the medium of the venetian blinds which are used to separate inner and outer space. This instalation made with 5 Venetian blinds is a parallel to the book. The object is in a form of the hexagon space. It mirrors surrounding story and closes it in the pages by the mirror film. The text is called Chronicle of the melancholy and indicates the intimite of the space of book. Between lines there is a penetration of the space and light behind the pages.
|
| |
|
Simulation of heating and cooling loads of the A1 building and the analysis of energy saving measures
Bartoník, Adam ; Kolbábek, Antonín (referee) ; Charvát, Pavel (advisor)
This thesis deals with the heat loss and the heat loads simulation of A1 building in the area of The Faculty of Mechanical Engineering, Brno University of Technology and with the measures of the energy saving. The measures of the thermo-technical charakteristics for the winter and summer operations are provided on the base of the current state simulation. These measures include increasing of thermal resistence (of the building case), the radiation shielding, the sun blinds and the passive cooling by the night ventilation. All the simulation are performed in TRNSYS 16.1 software.
|
|
Elementary school
Králíková, Zuzana ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
Diploma thesis solves the design of the elementary school. The building is situated in Letohrad in region Pardubice. The design of the school building contains small sport hall for pupils and for possible public access. Dinning room and the kitchen are the parts of the building. The object is designed as structural masonry system, ceramic bricks with external thermal insulation composite system. Building does not have a basement. The object is divided to three parts, teaching part, dining room with kitchen and sports hall with facilities. The building has two-storey in the teaching part, the remaining part is a single-storey with vegetation roof. All roofs are designed as a warm flat roof. The building is designed for capacity 150 pupils. Building ventilation is provided by air-conditioning equipment. Entrance to the building is barrier-free, it is installed a building elevator inside.
|
|
Solution Technology for Manufacturing "Slats"
Lamich, Štěpán ; Jaroš, Aleš (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis deals with a technology problem of the blind slat production. The work describes the slat production in the automatic rolling mill TPLv4 made by ISOTRA a.s. It aims to find the critical point of the production and suggest a new manufacturing technique/procedure. In conclusion, the thesis evaluates the proposed manufacturing procedure from technical and economical point of view.
|