|
|
Stress-strain analysis of the railway bridge in Zahrádky near Česká Lípa
Abdul moghni, Abdul rahman ; Vosynek, Petr (referee) ; Fuis, Vladimír (advisor)
Cílem této bakalářské práce je využití deformačně napěťové analýzy na Železniční most v Zahrádkách u České Lípy. Konstrukce mostu byla zjednodušena a vymodelována jako nosníková konstrukce. První část bakalářské práce byla věnována získávání vstupních dat a základních informacích z technické dokumentace mostu. V nosníkovém modelu bylo využito několik zjednodušení. První model považujeme za staticky neurčitý, zatímco druhý jako staticky určitou konstrukci. Každý model tedy obsahuje zátěž z důvodu vlastní váhy a zatížení způsobeno projíždějícím vlakem. Z důvodu objemnosti rovnic, využíváme k výpočtu software Maple. Zkontrolovali jsme i mezní stav vzpěru pro oba modely, avšak jsme uvažovali pouze zatížení vlastní váhou a zatížení způsobeno vlakem. Po získání analytických dat bylo důležité tyto výsledky ověřit. Toto bylo docíleno využitím metody konečných prvku za pomocí programu Ansys. Veškeré výpočty byly provedeny pro 2D modely. Jediná výjimka je numerická sekce, kde byl přidán 3D model za účelem porovnání s 2D modelem.
|
|
|
Analysis of the effect of damping on the magnitude of the response during dynamic headlamp excitation
Lukáš, Jan ; Biskup, Martin (referee) ; Vosynek, Petr (advisor)
The aim of the submitted diploma thesis is the magnitude determination of the headlamp response to the dynamic excitation. Currently it is necessary to measure this response, because it is one of the assessed criteria of quality of the headlamp. When comparing results of the experimental measurement and the computational modelling, a good consensus of resonant frequencies is observed, but there are significant differences in acceleration amplitudes. The cause of this is the variable damping value. The theoretical part of the thesis deals with polymeric materials, basics of oscillation and damping. It serves to understand the mechanisms, which influence the results of the experimental measurement. The practical part is dedicated to the procedure of the computational modelling and the experimental measurement implementation. The analysis of the experimental measurement results leads to an ascertainment of nonlinearities, which influence the headlamp behaviour. The results of a sensitivity analysis of the computational modelling are used to create curves, on the basis of which the damping is estimated. The inclusion of the estimated damping into computational modelling leads to reduction of the compared differences of the acceleration amplitudes. The conclusion of the thesis contains the recommendation for the damping determination during the computational modelling of the headlamp.
|
|
|
Using Salome Meca computing environment to solve problems of solid mechanics
Ptáček, Tomáš ; Vaculka, Miroslav (referee) ; Vosynek, Petr (advisor)
Given bachelors thesis deals with solutions of basic tasks of body mechanics with usage of the finite element method (FEM). An open-source software Salome Meca with Code_Aster solver is used there. Basic formulas of strength of materials on which is FEM based are introduces in the beginning. Then is presented software Salome Meca with its solver Code_Aster. Followed by own solution of tasks, which contain structural analysis and series of examples for solving the fracture mechanics. Numerical solutions from Salome Meca are compared with analytical solutions, if some exist, and with solutions from commercial software Ansys Workbench.
|
|
|
Structure modeling of mechatronic systems with spot welds and their influence on the eigen frequency
Gajdík, Michal ; Hadaš, Zdeněk (referee) ; Vosynek, Petr (advisor)
This bachelor thesis examines various types of spot welds in Ansys Workbench 13. In first chapter of this thesis are described theoretical foundations of simulation modeling. In following phase are analyzed each methods of simulation modeling. Practical part is about realizing different types of spot welds and examining their impact on clamped boards. Outputs of this thesis are modal abilities of each executed type of spot weld. On attached CD are program annex and project in Ansys Workbench 13. The goal is to analyze differently modeled spot welds, displaying primal deflections and comparison of modal abilities.
|
|
|
Using Calculix computing environment to solve problems of solid mechanics
Lukáš, Jan ; Lošák, Petr (referee) ; Vosynek, Petr (advisor)
Submitted bachelor thesis is focused on a solution of solid mechanics problems in a computing environment of the Calculix program. In the opening of the thesis there are briefly described theoretical foundations of finite element method. Subsequently there are analyzed particular parts of the program environment of Calculix. The main part of the thesis deals with solutions of three selected problems of solid mechanics. There are three different types of analyzes: static structural, modal dynamic and explicit dynamic. In the first assignment there is discovered deformation and stress in a fixed compressed squared timber. The second assignment deals with modal properties of the fixed squared timber. The last assignment discovers effect of loading velocity on the deformation of fixed compressed squared timber. In the conclusion there are briefly evaluated advantages and disadvantages of the Calculix program and there are compared solutions of the Calculix program and commercial program.
|
|
|
Deformation, stress and safety analysis of the bicycle frame.
Ondrejka, Jan ; Vosynek, Petr (referee) ; Vrbka, Jan (advisor)
The aim of this bachelor thesis is to assess complience and safety of the bicycle frame with basic elasticity approach, namely by deformation and stress analysis. After model simplyfying, two different cases were made. Difference between these two were in loads aplied on the frame. Maple 12.0 softwarre was used for calculation, Autodesk Inventor and AutoCAD were used for sketches. The results were checked with ANSYS Workbench.
|
|
|
Analysis of the influence of pressing force on the weld joint strength of the composite component
Litera, Jan ; Sedláček, Stanislav (referee) ; Vosynek, Petr (advisor)
Nowadays, components made of metallic materials are increasingly being replaced by components made of plastics or composites with a polymer matrix. This is associated with the issue of production processes such as pressing or welding, i.e. the influence of process parameters on the output properties of the product. The presented thesis deals with the issue of the combination of pressing and welding of a composite part, specifically the influence of the pressing overlap on the strength and tightness of the welded joint. The first part is focused on a search of available literature related to the problem. The second part deals with solving the problem using experimental modeling. Part of this chapter is inclusion of computational modeling in the design of experiment, detailed measurement of essential dimensions, microtome analysis and statistical processing and evaluation. The third part focuses on the creation of a method for evaluating the strength of the weld based on the pressing overlap using computational modeling. Essential part is also validation of the computational model based on previous experimental measurements. Finally, two methods for evaluation of the weld strength are presented. The first works on the basis of computational modeling and the second on the basis of experimental modeling. At the same time, the presumptions of usage of the created methods and their drawbacks are pointed out. Furthermore, the possibilities of their implementation in the initial design of the welded joint and the proposal for the next procedure are described.
|
|
|
Analysis of the use of Code_Aster in solving the limit state of fatigue strength
Busta, Michal ; Kovář, Jaroslav (referee) ; Vosynek, Petr (advisor)
This bachelor’s thesis deals with the analysis of the use of Code_Aster in the calculations of the limit state of fatigue strength. The first part is the research in fatigue analysis using the solver Code_Aster and in the second part the know-how of Code_Aster usage is used to solve three tasks of the limit state of fatigue strength. Acquired results are compared with analytical solutions and with the student licence of the numerical software Ansys Workbench 19.2. In conclusion, all the results are analysed.
|
|
| |
|
|
Determination of closing valve control moments
Benda, David ; Vosynek, Petr (referee) ; Hnízdil, Milan (advisor)
This bachelor thesis deals with the calculation of the torque on the output shaft of the four-concentric butterfly valves and experimental measurement of this torque on real manufactured valves. At the beginning is carried out a brief research, the purpose describe the basic components of the butterfly valves, its production variants of the offset disc, eventually types of fittings to piping. The main part describes the partial torque occurring on the individual components. Following data from the performer measurement and at the end are compared obtained results.
|
guest ::
