|
|
Center of Gravity Measurements of Motorcycles
Vaněček, Michal ; Bradáč, Albert (referee) ; Panáček, Vladimír (advisor)
My diploma thesis deals with measuring the center of gravity (CG) the motorcycle. The first part is outlined with legislation and the types of motorcycle division. I mention the theoretical types of measuring the CG the motocycle there too. These methods are applied to the issue of motor vehicles. The chosen one way of measuring the center of gravity which is used for practical measurements of gravity the motocycle. The practical part included the weighing of the different types of motorcycles with a different occupancy. These values are then processed and the resulting CG are calculated for each motorcycle. The values of CG were compared by experiment with the program for the analysis of road accidents and reconnoitred the measured results with this program results. In the last chapter is the evaluation of individual CG motorcycle and the influence of changes in occupancy due to a motorcycle.
|
|
|
Redesign of Vibration Power Generator with Respect to Overall Volume and Weight
Vaněček, Michal ; Dušek, Daniel (referee) ; Hadaš, Zdeněk (advisor)
This work deals with improvement construction already of the vibration power generator design. The improvement his feature and search ideal construction with reference to material, proportions and power. Gain here mechanical properties, to come to what best tune up and development of new construction for improved check out characteristics as is achievement. Tuning up of correct parameters proceed by the simulation and modelling in ANSYS and MATLAB environment.
|
|
|
Design of electromagnetic laboratory shaker
Vaněček, Michal ; Březina, Lukáš (referee) ; Hadaš, Zdeněk (advisor)
My thesis describes the design of a laboratory electromagnetic vibrator, which will be used for testing of the vibrating microgenerators. In the first part of my thesis is the search of selected laboratory electromagnetic vibration generators. There is also formulated its own proposal and subsequent tuning of the required dimensions and characteristics of the laboratory electromagnetic vibration generator. The tuning of necessary properties and dimensions is formed as modeling and simulating in programms Matlab / Simulink and ANSYS. The conduct of laboratory electromagnetic vibration generator is implemented in MATLAB / Simulink. Design and dimensions of the laboratory electromagnetic vibration generator is made in SolidWorks.
|
|
|
Integral education at primary school
Vaněček, Michal ; Kolář, Zdeněk (advisor) ; Dvořáková, Markéta (referee)
Práce se zabývá problémem integrovaného vyučování v české primární škole, speciální důraz je položen na řešení možnosti další integrace vlastivědného učiva, na tuto teoretickou část navazuje zpracování návrhu projektu, který na základě respektování interdisciplinarity integruje učivo o domově, o rodném místě. Praktická část, tedy samotný vlastivědný projekt, se sestává z pracovních listů pro žáky 4. - S.ročníku zš a z teoreticko - metodických rádců pro učitele (včetně jednoho pedagogicko - filozofického okénka). Pracovní listy pro žáky jsou v práci barevně odlišeny.
|
|
| |
|
|
Czech schools in the Protectorate
Vaněček, Michal ; Syřiště, Ivo (advisor) ; Blažková, Veronika (referee) ; Prokop, Jiří (referee)
of English I chose the topic "Czech school in the Protectorate" for my Doctoral thesis. The history of the Second world war bellongs to my long interest. My goal was to create a popular - educational publication for student teachers. I never met with this part of history of our school in the Faculty of Education and in the Philosophical Faculty of Charles University. I hope it's very important to remind this part of history - dificult situation of teachers and students during the Nazi era to current students. This sadly topic could raise future teachers to love the profession and could raise the prestige of teachers in our country. My wish would be after reading this work to increase patriotism, love and respect fot the history of our school. I described individual school protectorate years with the introductional into the Protectorate Education. At the beginning of each school year I described the basic historical milestones. I wanted to capture the humiliation of our education system during the Protectorate compared to the high level of pre - war years, dishonor Czech teachers, pupils, students and progressive germanizacion. I took advantage memories of witnesses for readability and catchiness readers. I tried to create text with elements of experiential learning. I believe that experiential...
|
|
|
Integral education at primary school
Vaněček, Michal ; Dvořáková, Markéta (referee) ; Kolář, Zdeněk (advisor)
Práce se zabývá problémem integrovaného vyučování v české primární škole, speciální důraz je položen na řešení možnosti další integrace vlastivědného učiva, na tuto teoretickou část navazuje zpracování návrhu projektu, který na základě respektování interdisciplinarity integruje učivo o domově, o rodném místě. Praktická část, tedy samotný vlastivědný projekt, se sestává z pracovních listů pro žáky 4. - S.ročníku zš a z teoreticko - metodických rádců pro učitele (včetně jednoho pedagogicko - filozofického okénka). Pracovní listy pro žáky jsou v práci barevně odlišeny.
|
|
|
Za rámec běžného plánování podníkání: budování internetového startupu v rychlé ekonomice
Šimek, Vojtěch ; Krause, Josef (advisor) ; Vaněček, Michal (referee)
First part of the thesis compares available approaches on business planning, namely the traditional and newly emerged and proposes a Business Planning Approach Selection Framework that should help (newbie) entrepreneurs with orientation in the chaotic business planning world and choosing an approach suiting their specific needs. Conclusion of the theoretical part is that both the traditional and modern business plans have their role in todays business environment. While the old are great for external presentation and funds securing, the new enable to create more complex process for planning successful business from the original idea to and beyond their launch, building on customer feedback and gradual iterations. The practical part then builds on the theoretical research and aims to check feasibility of an actual business project, a multisided platform mediating sales of automotive financial products. It describes the model refinement and product creation process as well as eventually proves viability and feasibility of the whole business.
|
|
|
Center of Gravity Measurements of Motorcycles
Vaněček, Michal ; Bradáč, Albert (referee) ; Panáček, Vladimír (advisor)
My diploma thesis deals with measuring the center of gravity (CG) the motorcycle. The first part is outlined with legislation and the types of motorcycle division. I mention the theoretical types of measuring the CG the motocycle there too. These methods are applied to the issue of motor vehicles. The chosen one way of measuring the center of gravity which is used for practical measurements of gravity the motocycle. The practical part included the weighing of the different types of motorcycles with a different occupancy. These values are then processed and the resulting CG are calculated for each motorcycle. The values of CG were compared by experiment with the program for the analysis of road accidents and reconnoitred the measured results with this program results. In the last chapter is the evaluation of individual CG motorcycle and the influence of changes in occupancy due to a motorcycle.
|
|
|
Design of electromagnetic laboratory shaker
Vaněček, Michal ; Březina, Lukáš (referee) ; Hadaš, Zdeněk (advisor)
My thesis describes the design of a laboratory electromagnetic vibrator, which will be used for testing of the vibrating microgenerators. In the first part of my thesis is the search of selected laboratory electromagnetic vibration generators. There is also formulated its own proposal and subsequent tuning of the required dimensions and characteristics of the laboratory electromagnetic vibration generator. The tuning of necessary properties and dimensions is formed as modeling and simulating in programms Matlab / Simulink and ANSYS. The conduct of laboratory electromagnetic vibration generator is implemented in MATLAB / Simulink. Design and dimensions of the laboratory electromagnetic vibration generator is made in SolidWorks.
|
guest ::
RSS feed.