|
|
Possibilities of utilizing waste from the production of cement-bonded particleboards in building materials
Bartoň, Andrej ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
This bachelor thesis deals with possible applications of waste created during cement-bonded particleboard in building materials production. The theoretical part of the thesis analyzes the individual components and processes in the production of cement-bonded particleboard, production processes during which the waste is produced, and the form and quantity the waste can be found in. The theoretical part focuses on the treatment of the various waste forms and their further use in modified or untreated form. In the practical part, the influence of the binder parts substitution on the cement matrix properties is verified. Fine loose waste from the cement-bonded particleboard was used for the sample production.
|
|
|
Influence of humidity changes to properties of building materials with organic filler
Vasas, Silvestr ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
The bachelor's thesis deals with the issue of dimensional changes of building materials containing organic filler, in connection with changes in the humidity of the environment in which the material is located. Searches of knowledge, especially from the scientific literature showed a significant effect of moisture on volume and weight changes of both wood itself and wood of cement composites. In this respect, the treatment of wood (thermal, chemical, etc.) ort he surface treatment of the final wood of the cement composite (coating systém, impregnation, etc.) is essential to reduce the rate of change due to ambient humidity. Experimental laboratory assessment of dimensional and mass changes proved compliance with theoretical knowledge and extended them by specifying the effect on individual dimensions. The different behavior of cement-bonded particleboards in terms of their hygroskopicity was demonstrated on the changes of the boards surface threatment with the coating system and on the boards without surface threatment.
|
|
|
Surface treatment for resistance improve of board materials with cement matrix and an organic filler
Zrza, Ondřej ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
As all materials used for exterior construction, cement-bonded particleboards also subject to climatic effects, such as frost, chemicals (eg. sulphates) or UV rays. Degradation of theese effects is slightly increased by organic base. Increased susceptibility can be eliminated by a effective coating, which reduces direct contact with aggresive influences on the board and provides longer durability. Theoratical part of this thesis analyzes different types of negatice influences and their effect on durability. Practical part contains selection of specific types of coating and assessment of their mechanical and aesthetic properties including spectrophotometric analysis of color change for each degradation effect.
|
|
| |
|
|
Filling materials for vertical and horizontal constructions using renewable raw materials
Gregor, Petr ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
This thesis deals with industrial hemp and its use in vertical and horizontal structures. The work is mainly focused on the fillers of industrial hemp and inorganic binder. In the practical part of the feasibility study for future use of industrial hemp in the construction industry as a filling materiál in vertical and horizontal structures. This area has been targeted by all test samples. They are presented here and evaluated and compared the results of tests on unconfined compressive strength, compressive strength, depending on the deformation density of fresh and hardened mixture and the termal conductivity of different types of inorganic binders and fillers such as hemp.
|
|
|
Boards with alkali activated binder filled with wood chips
Gajdušková, Patricie ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
For the production of cement chipboards, cement is used as a binder which is an ecological burden for our planet. This diploma thesis deals with research into the possibility of replacing it with other alternative materials, especially those that are created as a by-product of other production. The focus is primarily on slag, heating plant slag or brick dust. The theoretical part deals with the previous studies and theoretical knowledge of alkaline-activated matrices which are supplemented with an organic binder such as wood chips which are used to reinforce the boards. The practical part deals with the above-mentioned alternative materials which are tested for the design of recipes for modified boards made of alkali-activated binder reinforced with chips. These modified recipes are subsequently subjected to physical-mechanical tests such as bending strength, modulus of elasticity and other monitored parameters of the boards. Selected board variants were analysed in terms of mineralogical composition and microstructure.
|
|
|
Utilization of by-products from cement-bonded particleboards production in base layers
Dobrovolná, Martina ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
This thesis deals with the use of by–products from the production of cement–bonded particle boards as an alternative raw material for the stabilization of the subsoil or into a ground solid. The theoretical part briefly describes the current status of waste management. A set of alterantive raw materials used to hydraulically cemented mixtures is listed here as well as the recherche of the foreign research is elaborated from this area. The experimental part of the thesis firstly deals with the choice of raw materials and basic recipes. In the advanced stage the laboratory analyses are carried out on the modified formulas. Based on the results of these analyses the posibility of using by–products from the production of cement–bonded boards for the stabilization of the subsoil is evaluated here.
|
|
|
Analysis of utilization of waste generated in the production of cement-bonded particleboards
Melo, Michal ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
The content of this diploma thesis is to explore the possibility of utilization of wastes generated in the production of cement-bonded particleboards in terms of their application as secondary raw materials back into the production. At first an attention was focused on a fine-grained waste containing wood particles with cement matrix produced during the final adjustment of boards. Further, fly ash generated from the combustion of wood chips in the biomass boiler is assessed. In the theoretical part the different types of waste generated in the production of cement-bonded particleboards are characterized, including their methods of creation, production, use or disposal of the current and other proposals for utilization in the future. The research papers dealing with applications of various wastes in the production of cement composites with organic fibers were also studied. In the experimental part of the thesis the characteristics of each type of waste generated in the production of cement-bonded particleboards are evaluated using laboratory analyses and their pretreatment methods for another use are designed. Subsequently performed the laboratory verification capabilities of secondary raw materials from wastes in cement-bonded particleboards identifying and evaluating basic physico–mechanical characteristics of boards with modified composition.
|
|
|
Changes in the properties of cement-bonded particleboards due to fluctuations in atmospheric humidity
Vasas, Silvestr ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
The work is focused on changing dimensional, volume, weight and mechanical properties of cement bonded particleboards due to fluctuations in the humidity of the surrounding environment. Part of the work is a search of scientific literature focused on the possible modification of organic materials used as fillers in cement bonded matrices, as well as cement bonded composites. Since wood is used as a filler, which is very susceptible to moisture, it is important to treat it – thermally, chemically. In the practical part, various recipes of cement bonded particleboards were inspired by previous research are designed and tested. The laboratory assessment of changes in the properties of cement bonded particleboards due to relative humidity demonstrated compliance with the theoretical foundations, as a result of the thesis, suitable recipes for the production of cement bonded particleboards including their verification were defined.
|
|
|
Influence of humidity changes to properties of building materials with organic filler
Vasas, Silvestr ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
The bachelor's thesis deals with the issue of dimensional changes of building materials containing organic filler, in connection with changes in the humidity of the environment in which the material is located. Searches of knowledge, especially from the scientific literature showed a significant effect of moisture on volume and weight changes of both wood itself and wood of cement composites. In this respect, the treatment of wood (thermal, chemical, etc.) ort he surface treatment of the final wood of the cement composite (coating systém, impregnation, etc.) is essential to reduce the rate of change due to ambient humidity. Experimental laboratory assessment of dimensional and mass changes proved compliance with theoretical knowledge and extended them by specifying the effect on individual dimensions. The different behavior of cement-bonded particleboards in terms of their hygroskopicity was demonstrated on the changes of the boards surface threatment with the coating system and on the boards without surface threatment.
|
guest ::
