|
|
Wood-splitting machine
Svoboda, Vít ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The objectives of the bachelor’s thesis is to make a short research about the cutting machines in general, compare the design, individual drives and the parameters of these machines. The next part is the emphasis on the actual construction of the machine, which is another goal of the work. At first, the frame is designed, then the hydraulic circuit of machine is designed by calculating and the last part deals with control and supporting calculations splitter component elements. The basic drawings of selected components of the splitting machine are parts of the work.
|
|
|
Investigation of intercalation of alkaline metals in electrochromic devices
Kortyš, Petr ; Špičák, Petr (referee) ; Svoboda, Vít (advisor)
This work deals with investigation of intercalation of alkaline metals in electrochromic devices by the help of the quartz crystal microbalance method. The general aim is to investigate the influence of molar mass and resistance on properties of vanadium pentoxide and tungsten trioxide electrochromic films. The main measuring method used for investigating of interacalation of sodium and lithium ions into these films is the cyclic voltammetry. Drawn graphs reveals that sodium and lithium ions shows different qualities during intercalation, particularly in participation of solvent, therefore, in the influence of molar mass and in structural changes in the films.
|
|
|
Study of Electrochemical Insertion Cations to the Oxides of Transitive Metals
Svoboda, Vít ; Kadlec, Jaromír (referee) ; Trnková, Libuše (referee) ; Kazelle, Jiří (advisor)
Electrochromic devices are based on the intercalation processes to the active layer mostly WO3. The optical properties of active layer are changed by intercalation ions from the electrolyte. For that purpose are used Li ions. The mass of thin layer can be observed by the QCM method. This method is based on the changes of the resonance frequency of a quartz crystal resonator. The investigated substance is deposited on the surface of the resonator. Various metals (Pt, Au, Ag) and their compounds should be plated on the resonator. Most frequently, the resonators for the frequency 5,0 MHz are used. This frequency change is used for the detection of chemical changes of the electrode surface and is very sensitive.
|
|
|
Oscilloscope module with wireless data transmission
Kočík, Karol ; Svoboda, Vít (referee) ; Havlíková, Marie (advisor)
The aim of the thesis is the design and realization of the oscilloscope module with wireless data transfer. One part of the thesis is a short overview of the different types of AD converters. The main part is focused on the hardware configuration that allows modification of the wireless module of the oscilloscope, and the possibility of using in the industrial zone. The design takes into account reducing of consumption and EMC compatibility.
|
|
|
Zinc based negative electrode for alkaline accumulators
Prchal, Jiří ; Svoboda, Vít (referee) ; Špičák, Petr (advisor)
The object of this project is research and preparation of the permanent zinc electrode in a strong alkaline surrounding for the usage in Ni-Zn accumulators. This system is characterized by a low overall ecological impact on environment, higher specific energy and higher electromotive force than nowadays commonly used systems (lead, nickel-cadmium). The goal of this project is to originate a new procedure, which will make possible to steady a zinc electrode. Every research faces a problem shaping changes of zinc electrode during cycling and related low cycle life. This work consists of the theoretical part, in which is explained a basic accumulators mechanism and practical part, in which is described performed research.
|
|
|
Temperature scanning with Web site presentation
Svoboda, Vít ; Vyoral, Josef (referee) ; Kacálek, Jan (advisor)
This master’s thesis solves design and realisation of device for temperature value scanning. First chapter introduces reader into basic principles of transmitting data over inetrnet. Next, the conception of whole designed system is described. Third chapter treats about suitable types of hardware to complete the system. Fourth and fifth chapter describes coherent vision of software realisation for values scanning and their storing into database. Last part attends to implement the dynamic web pages.
|
|
|
Study of fuel cells
Kamrla, David ; Svoboda, Vít (referee) ; Novák, Vítězslav (advisor)
This bachelor thesis offers a look into the issues of hydrogen fuel cells and is focused on low-temperature alkaline fuel cells (AFC). The primary aim is creation of the manufacturing process of the AFC electrodes, followed by the verification of these procedures by using them in experimental measurement. Further on, another possible options of the usage of various catalyzers and processes of AFC electrodes are presented. These options are evaluated and compared by experimental use of various pairs cathode – anode, with measured characteristics of the make-shift fuel cell being the outcome.
|
|
|
Investigation of mass changes by piezoelectric resonator
Kužílek, Jakub ; Svoboda, Vít (referee) ; Špičák, Petr (advisor)
An operation deals with a concept of the new cell for measuring weight changes with high precision through the use of quartz crystal micro-scales called QCM. The new cell is destined for crystal resonators which diameter is 14mm. The resonators are produced in the Czech Republic. A price is the greatest advantage of crystal resonators in comparison with original crystals. The next positive is higher mechanical tolerance which is outgoing of a guest-size. The cell designed by this way is tested in electrochemical system where a deposition of metallic copper in crystal is happening. A homologation of accuracy is judged by Faraday’s law and using Sauerbrey equation for quartz crystal microbalance in cyclic voltammetry measurement method.
|
|
|
Spectral charakteristic of Ion area for different type of ionisors
Novák, Roman ; Svoboda, Vít (referee) ; Buřival, Zdeněk (advisor)
This work deals with issues of explanations and describing of a whole kind of probléme, which appear duiring a generations and measurings of a anionts. I would like to explain and warn for different factors why we should continue with measuring and inventing in this thema. Understanding of a anionts behavior and practice measuring of a ionts area is the most important part of my work, to correctly analyse iont area probléme, or to suggest suitable solution.
|
|
|
The influence of cobalt additive on parameters of positive electrode for Ni-Cd accumulators
Svoboda, Michal ; Svoboda, Vít (referee) ; Špičák, Petr (advisor)
The Master´s thesis deals with description of the influence of cobalt additive on positive electrode parameters for Ni-Cd accumulators. Trough the use of Electrochemical Quartz Crystal Microbalance are analysed the effects which decline effective life of positive electrode during accelerated cycling. Theoretical part describes important characteristics of Ni-Cd accumulators, the working principle and effects which are in progress on positive electrode during cycling. The next part deals with description of system EQCM and the pricnciples of doping active mass with cobalt additive. Practical part consists of EQCM system calibration and electrochemical measurements. The principal aim is detection of the influence of cobalt additve on active mass during cycling in different electrolytes. From the results of measurements is set the optimal amount of cobalt additive.
|
guest ::
RSS feed.