|
| |
|
|
Electrodes for electrolyser
Kaňa, Ondřej ; Knotek, Tomáš (referee) ; Sedlaříková, Marie (advisor)
In my diploma work i focus on the production hydrogen by electrolysis of water using by electrolyzer. Especially, i concentrate on preparation electrodes for laboratory electrolyzer. I work on principles of increasing electrodes area, increasing functional surface of electrodes, by Nickel – Zinc coatings. By electroplating or chemical plating we spread microlayer of Nickel-Zinc onto electrodes made of steel plate. Then, in alkali - hydrate oxide, we will corrode Zinc components off the alloy and this is how we create pore surface of electrode. From macroscopic view, electrode has same geometrics propositions, however from microscopics view, the electrode has bigger surface area. The hydrogen production increases with unchanget sizes of electrolyzer.
|
|
|
Properties electrodes materials for alcaline accumulators
Řihák, Lukáš ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
This thesis is involved in basical properties of electrode materials for alkaline accumulators. This thesis describes the possibilities of capacity stabilisation of nickel electrode to be stable for highest number of cycles. Thesis also consider modification of properties of electrode materials on the base of nickel hydroxide by using dopes (aluminum, manganese). Measuration proceeded on the thin film electrodes created by electrodeposition. Measuration of properties of electrodes proceeded by cyclic voltammetry and frequency analyzis.
|
|
|
Gel polymer electrolytes with nanoparticles
Szotkowski, Radek ; Sedlaříková, Marie (referee) ; Jahn, Michal (advisor)
This master‘s thesis concerns gel polymer electrolytes formed on a methyl methacrylate base with selected types of nanoparticles. In the thesis are also analyzed the methods for measuring electrochemical properties. The practical portion deals with sample preparations of gel polymer electrolytes with different contents of alkaline salt in a solvent, creating gels with different nanoparticle content and comparing gel polymer electrolytes polymerized with heat and UV radiation. The thesis deals with the evaluation of these samples from the viewpoint of electrical conductivity and potential windows as well as thermal analysis of selected samples.
|
|
|
Gel polymer electrolytes with high fire safety
Musil, Michal ; Zatloukal, Miroslav (referee) ; Sedlaříková, Marie (advisor)
This work deals with preparation of PMMA based gel polymer electrolytes with high fire safety and high ionic conductivity. In the theoretical part of the work GPEs for Li – ion accumulators, fire safety tests, fire retardants are mentioned. Preparation of GPEs, electrical and other properties are described in the experimental part. Furthermore, new possible methods of gel preparation are discussed.
|
|
|
Thin Film Electrodes for Electrochromic Devices
Macalík, Michal ; Kadlec, Jaromír (referee) ; Nováková,, Sabina (referee) ; Sedlaříková, Marie (advisor)
The work deals with the deposition of layers for electrochromic device with different methods. Transparent electrically conductive layer of SnO2 was deposited by pyrolytic decomposition of peroxostannate solution. Hydrogen peroxide in starting solution contributes to the oxidation process of growth layers and to increase the electrical conductivity. Active electrochromic layer of WO3 was electrolytic deposited from the peroxotungstic acid solution. Optimal deposition time and the optimal annealing temperature of deposited layers were found. Passive electrochromic layer of V2O5 was deposited using dip-coating method from peroxovanadate solution. A contribution of solution diluted with distilled water was investigated. Found results were used to construct complete electrochromic device with polymer gel electrolyte.
|
|
|
Mechanical properties of gel polymer electrolytes
Bárta, Vladimír ; Vondrák, Jiří (referee) ; Sedlaříková, Marie (advisor)
This work deals with the measurement of electrical conductivity and mechanical properties of gel polymer electrolyte containing Lithium ion. Their preparation and performance depends on the concentration of nanoparticles Al2O3 contained therein. The theoretical part deals with the development of gel polymer electrolyte, their use and methods of measurement of electrical conductivity and mechanical properties. In the experimental part describes the preparation of gel electrolyte, the measurement of electrical conductivity, temperature dependence and the measurement of mechanical properties.
|
|
|
Biodegradable bones implants based on Fe
Tkáčová, Tereza ; Míka, Martin (referee) ; Sedlaříková, Marie (advisor)
This thesis writes about biodegradable bone implants based on iron. The currently used metal-based implants have disadvantage in an often need of secondary surgery intervention to remove the implant. Therefore, there is a big research of biodegradable bone implants nowadays. In this work, iron-based materials with the addition of zinc and magnesium are being investigated. The produced samples have been immersed in a solution of NaCl and simulated body fluid, SBL. Subsequently there were regularly analysed changes of corrosion potential, pH, conductivity and also weight loss was watched.
|
|
|
Electrode Active Materials for Lithium-Ion Accumulators
Čech, Ondřej ; Oriňáková, Renáta (referee) ; Paidar,, Martin (referee) ; Sedlaříková, Marie (advisor)
This doctoral thesis deals with synthesis and characterisation of electroactive electrode materials for li-ion batteries and accumulators. The work is divided into two main parts. One deals with LiFePO4 based cathode composite electroactive material and in the second is described the synthesis and utilization of monoclinic TiO2(B) as an anode for li-ion cell. The main aim of the work is to relate the synthesis procedure and structural properties of both materials to its electrochemical preformance.
|
|
|
Positive electrode for lůithium-ion batteries based on LiCoO2
Krištof, Petr ; Kazda, Tomáš (referee) ; Sedlaříková, Marie (advisor)
This diploma thesis deals with materials used by production ofcathodes of Lithium-ion batteries. Primary this thesis deals with LiCoO2material and its subsidizing of alkali metals. The first part deals with the charakteristic of Lithium-ion batteries, used materials, possibilities of doping and charging. The practical part concentrates on production of active substance of cathode and doping this substance by sodium and potassium. The methods of evaluation were used galvanostaticcycling and x-ray analysis (XRD).
|
guest ::
RSS feed.