National Repository of Grey Literature 40 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Disc friction loss in centrifugal pumps and hydraulic turbines
Zemanová, Lucie ; Kozubková, Milada (referee) ; Sedlář, Milan (referee) ; Rudolf, Pavel (advisor)
Dizertační práce je zaměřena na výzkum proudění v mezidiskových spárách hydraulických strojů s důrazem na čerpadla s nízkými specifickými otáčkami. Navzdory tomu, že tekutina v mezidiskových prostorách čerpadel zaujímá velmi malý objem, může výrazně ovlivnit proudění v celém stroji. To má následně vliv na provoz, charakteristiky a celkovou účinnost, zvlášť v případě čerpadel s nízkými specifickými otáčkami, protože stav proudění určuje vznikající diskové ztráty. Rovněž ovlivňuje rozložení tlaku a tím výslednou axiální sílu. Porozumění proudění v mezidiskových spárách je zatím omezené, současné poznatky vychází z teorie odvozené pro značně zjednodušený případ disku rotujícího v hladké válcové spáře. Použitelnost pro popis proudění ve skutečných hydraulických strojích je diskutabilní. Za účelem výzkumu proudění v reálném odstředivém čerpadle bylo navrženo a sestaveno experimentální zařízení umožňující pozorování proudění v zadní mezidiskové spáře pomocí optických metod, měření krouticího momentu a vznikající axiální síly. Také byla popsána metodika pro numerické simulace tohoto druhu proudění umožňující podchytit nestability a vírové struktury. Numerické simulace vhodně doplňují experimentální měření, rozšiřují rozmezí studovaných provozních podmínek a pomáhají popsat jevy, které by šlo měřením jen obtížně odhalit.
Design of a Very Low Specific Speed Pump
Chabannes, Lilian ; Sedlář, Milan (referee) ; Drábková, Sylva (referee) ; Rudolf, Pavel (advisor)
Čerpadla s nízkými specifickými otáčkami nacházejí uplatnění v široké škále aplikací, ale trpí nízkou účinností a rizikem nestability křivky dopravní výšky. Tato disertační práce pojednává o vylepšení hydraulických parametrů čerpadla se specifickými otáčkami ns = 32. Práce se zaměřuje na průtok v oběžném kole a ve spirále, které jsou řešeny pomocí CFD. Průzkum literatury ukázal, že přidání mezilopatek do průtokového kanálu je účinný způsob, jak zlepšit neuspokojivé proudění obecně přítomné v oběžných kolech s nízkými specifickými otáčkami. Byla zkoumána poloha mezilopatky v kanálu a vliv počtu přítomných mezilopatek. Část výsledků je ověřena experimentálně v laboratoři fakulty. Rovněž je zkoumán tvar spirály a pozornost je věnována numerickému řešení proudění u stěn a jeho vlivu na simulaci. Po numerických výpočtech na třech různých spirálách je navržen nový tvar, který zlepšuje vypočtové parametry čerpadla při nízkém i vysokém průtoku.
Cavitation Induced by Rotation of Liquid
Kozák, Jiří ; Sedlář, Milan (referee) ; Kozubková, Milada (referee) ; Rudolf, Pavel (advisor)
Tato disertační práce se zabývá experimentálním a numerickým výzkumem kavitace vyvolané rotací. Pro potřeby tohoto výzkumu byla využita transparentní osově symetrická Venturiho dýza, díky čemuž bylo možné zkoumat dynamiku kavitujícího proudění pomocí analýzy vysokorychlostních nahrávek.
Dry gel forms - aerogels, xerogels - preparation, properties and potential use.
Sedlář, Marian ; Smilek, Jiří (referee) ; Sedláček, Petr (advisor)
The content of this bachelor thesis was to find out what influence has the drying of hydrogel on its internal structure on an appropriate model hydrogel system. In the theoretical part of this thesis selected methods of structural analysis that are commonly used for characterization on gels in their original hydrated state and in dry state were described. In the practical part, agarose based hydrogels with different concentrations and with various additions of polyelectrolytes were chosen as the model hydrogel system. Cryo-scanning electron microscopy and turbidimetry were used for the structural analysis of hydrogels. For the dry gels, scanning microscopy and mercury porosimetry were used. The obtained data and results for our model system can be use in analyse of other hydrogel systems and their dry forms.
Methodology for evaluation of the gear windage loss and thermal load of a tooth
Bauer, Petr ; Bartoš, Ondřej ; Hrubý, Jan ; Kordík, Jozef ; Krátký, Tomáš ; Sedlář, Milan
This report contains results of experiments identifying thermo-physical properties of a gearbox oil mist. The main part of the report studies a dependency of a gear wheel windage power loss on the radial and axial gap between the wheel and its enclosure. This parametric study relies primarily on the results coming from numerical simulations (CFD analysis). For the default enclosure configuration the evaluated power dissipation is compared with the values obtained using theoretical relationships. The theory is based on one-dimensional turbulent velocity profiles over smooth and rough surfaces. A summary of the theoretical analysis and the derivations are also included in the report.\nThe influence of a tooth shape on the windage power loss is also studied using the numerical simulations. A change of a tooth top surface angle is technologically easily realizable adjustment, and can have a positive effect on the power loss reduction. In the report there are performed simulations for varying angles of this surface and the expected improvements in aerodynamic properties are confirmed.\nThe last part of the report contains the formulation of boundary conditions for numerical evaluation of gear wheel heat balance. This information is documented more in detail in related research reports.\n
Generalization of the methodology for evaluation of the gear windage loss
Bauer, Petr ; Kordík, Jozef ; Krátký, Tomáš ; Sedlář, Milan
The first part of the report proposes a methodology for gear windage loss evaluation using CFD analysis. The methodology includes simplification of gearbox complex geometry and the toothed wheel and pinion are replaced by a rough-walled disks with additional braking volume forces. The values of volume forces were determined using auxiliary computations with a real gear geometry (a gear segment with periodical boundary conditions). The computations included configuration of the gear wheel meshing with the pinion, while distance of wheel enclosure was a variable parameter (the case without enclosure was tested as well). The cases without pinion were computed too, they were compared with earlier results obtained with the gear segment geometry.\nThe second part of the report contains a revision of the earlier proposed analytical approach. The approach can serve for approximate gear windage loss evaluation and its idea dwells in smooth connection of logarithmic velocity profiles. The gear windage loss values obtained from the analytical approach were compared with the results based on CFD analysis. A good agreement between both methods was concluded.\n
Image processing software for infrared thermography study during radio frequency ablation
Zemčíková, Petra ; Sedlář, Martin (referee) ; Bernard, Vladan (advisor)
This thesis deals with principle and device of radiofrequency ablation technique, infrared imaging systems with a focus on non-contact measurement of surface temperatures, process of representation and detection of infrared radiation. On the next part of the thesis are described methods of image processing with an emphasis on the methods used in the software for processing infrared radiofrequency ablation images. The thesis also includes the design and the description of the created software for evaluating the effect of duration of ablation, used power or position of the electrodes and the stent to the stent heating.
Measurement and analysis of the blood flow in peripheral vessels by ultrasound Doppler methods
Lepš, Milan ; Sedlář, Martin (referee) ; Vlk, Daniel (advisor)
Nowadays, the Doppler ultrasonography is an essential part in medicine. With it, we can observe acoustic showoff some tissue associated with Doppler measurement of blood flow parameters. It is still using Doppler devices with a continuous signal which are although structurally and technically simpler, but they are suitable for measuring the speed and volume of blood flow in peripheral blood vessels of the upper and lower limbs. There are calculated physiological parameters from the flow curves that are clinically used for assessing the state of blood supply to the body part. We can determine many values from the flow curves, like peripheral resistance, blood flow in systole and diastole, medium speed, etc. Study group of people are male and female students from 18 to 20 years. Doppler measurements have been performed before physical exercise and after physical exercise.
Application of mathematical methods for object detection in ultrasound B-image
Ruttner, Michal ; Jiřík, Radovan (referee) ; Sedlář, Martin (advisor)
This work deals with the detection of objects in ultrasound B-image. First we will become familiar with the ultrasound device and its functions.We will demonstrate various kinds of imaging techniques used in ultrasound diagnostic imaging. Further we will be concerned with medical image processing. We will describe the functions of some edge detectors based on the first derivation, detectors based on the second derivation, detectors based on approximation of parametric model and detectors of borders or lines. Otherwise we will find out how to do preprocessing, Some of these methods we will try on different images for sharpening of image and enhacment of contoure. Using the program created in MATLAB©, we will use process imaging on internal carotid images. In conclusion we will evaluate the results.

National Repository of Grey Literature : 40 records found   1 - 10nextend  jump to record:
See also: similar author names
1 Sedlář, Marian
6 Sedlář, Martin
Interested in being notified about new results for this query?
Subscribe to the RSS feed.