|
|
Surveying of the actual state of the farm in Jekov.
Pracná, Petra ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
This thesis is focused on surveying and documentation of the actual state of the farm in Jekov which is situated in Zvěstov village and it is part of Bořkovice land register. The first part of the thesis deals mainly with surveying itself, preparing of the geodetic control and planimetric and altimetric survey. The accuracy of the surveying is described. The second part of thesis is focusing mainly on creating the technical drawings. The specification of documentation of the historical buildings is mentioned.
|
|
|
Surveying of Vertical Network with Use of Electronic Levelling.
Czíria, Kornél ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
The work deals with building and followed surveying of two vertical networks with the method of geometric levelling using electronic level Leica Sprinter 150M with coded levelling rot. Due to the large difference in height between the points of the network corrections were introduced from the levelling-rot calibration at places of contact of the withdrawable parts of the levelling-rot. These corrections were calculated by the procedure, which was determined by the calibration test measurements. The final height of points of the network were adjusted by the method of least squares. Benefit of the calibration was analysed by comparing the results with the introduction and without introducing calibration corrections. Part of the work is also analysis of the accuracy and documentation of points of the vertical networks.
|
|
|
Thematical map in area Malá Morávka
Kolb, Jan ; Ing.Jiří Sláma (referee) ; Kutálek, Stanislav (advisor)
A main purpose of this bachelor thesis is presentation of problem about evaluation of thematic map of the location Hvězda in Malá Morávka for following needs of project work. Evaluation of thematic map often doesn’t end with one purposed action, but it is connected with following actions, that can complete or develop an original purpose. Underground courses of engineering networks in area site were staked and after that they were also surveyed. A purpose of staking and surveying is legalization of usage. Important part of work is staking of parcel’s boundaries that has to be agreed by owners. Geometric plan for marking of real execution of constructions is also important part of work.
|
|
|
Geodetic Works During Reconstruction of Road Crossing in Uherské Hradiště
Lovecký, Marek ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
This thesis is engaged in geodetic works related to the increase of the capacity of the road II/497 and the modification of the intersection with the road I/55 in the town of Uherské Hradiště. The work is mostly focused on the field of the engineering geodesy. It resolves the issues from the alignment during the construction to the focus of the construction itself. Individual survey procedures are analyzed in the context of the prescribed deviations specified in the project documentation or ČSN. Geodetic documentation for the selected measurements is worked out.
|
|
|
Geodetic documentation of actual shopping center area Vrbno pod Pradědem
Zušťák, Marek ; Sláma, Jiří (referee) ; Foral, Jakub (advisor)
This bachelor works is deal with the creation of the geodetic documentation of actual construction. In this work is described in detail the process of surveying works from preparation, through the mapping work on the construction, computer work until after completion of all parts of the geodetic documentation. The aim of this work is preparation of thematic map of the new shopping center in Vrbno pod Pradědem.
|
|
|
Sport Timing System
Sláma, Jiří ; Jurnečka, Peter (referee) ; Kačic, Matej (advisor)
This Bachelor's thesis describes sport timing system. Main goal was to create aplication, that covers completely all requirements of IT at sport competition. To these tasks belong creating web pages, schedule and then wireless launch of stopwatch. Aplication was implemented in IDE Qt with using programming language C++.
|
|
|
Machine Control System Using GNSS
Růžička, Rostislav ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
Bachelor thesis describes technologies for control of building machines. It focuses mainly on building machine contorl using GNSS technology. It solves the preparation of the data from the project documentation, the connection to the primary building network, the machine calibration, the documentation of the standing control and the measurement control. Finally, it explores the advantages and disadvantages of using this technology. The bachelor thesis is a guide to how construction machinery can be using control of modern technologies.
|
|
|
Accuracy analysis of current GNSS sensors
Jabůrek, Ondřej ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
The purpose of this thesis is to test and analyze the accuracy of detemining the position and heights of contemporary GNSS receivers in RTK mode using the network of permanent stations CZEPOS with VRS3 - iMAX - MSM product. The test procedures are intended to provide representative results with potential use in conventional surveying applications. The goal of the thesis is to obtain measured data, analyze this data and evaluate the results. Based on this results we should be able to compare the tested devices. The comparison is intended to carry out an information that will help us to select a more suitable receiver for a particulat application in the common practice of surveyor.
|
|
|
Bohemia in the Merovingian age
Korený, Rastislav ; Košnar, Lubomír (advisor) ; Sláma, Jiří (referee) ; Varsik, Vladimír (referee)
Bohemia in the Merovingian age - end of the 5th - 6th century AD Rastislav Korený Mining Museum Příbram Abstract The following objectives have been pursued in the dissertation: 1. A new commented inventory of sites from the end of the 5th and 6th century (excluding coin finds) which should become a reliable basis for an analysis of the collected material. The last inventory of such kind was created by Bedřich Svoboda approximately sixty years ago, i.e. in the 1940-1950s, and it was not published until 1965. The need for a new revised inventory became apparent over the recent years. During the physical re-evaluation of earlier finds and related primary visual and textual documentation, which was carried out in the years 1996- 2013 (30 museum and non-museum collections, 4 separate archival collections and other information sources were revised), there was a striking discrepancy between the published data contained in the catalogue of the above mentioned monograph and reality. The excavations carried out after 1965 also, naturally, resulted in the expansion of the amount of available source material. 2. Because the material currently available from settlements was published by Ivana Pleinerová in 2007, the analysis of the collected data concentrated, in addition to the identification of chronologically more...
|
|
|
Measuring the settlement of an apartment building
Haragová, Veronika ; Sláma, Jiří (referee) ; Bureš, Jiří (advisor)
The bachelor's thesis deals with the geodetic survey and processing of preventive monitoring of vertical displacements and deformations of an apartment building located in Olomouc, Czechia. The main goal is to determine the degree of uneven settlement of a building whose subsoil, according to a geological survey, shows the presence of groundwater. The measurement was carried out by the method of precise leveling using hanging code scales. Part of the solution was an experimental measurement to determine the difference of origins of the scales and to determine the accuracy of the reading on the used hanging scales and the effect of the length of sight on the accuracy of the reading on the scale. In total, the bachelor's thesis processes five stages measured in a time interval from 4/2021 to 4/2023. The results of this work are values of detected vertical displacements of points in individual stages with respect to the initial stage. Results are graphically interpreted in the context of the geophysical survey.
|
guest ::
RSS feed.