National Repository of Grey Literature 199 records found  beginprevious166 - 175nextend  jump to record: Search took 0.01 seconds. 
Manufacturing of car company logo
Prouza, Tomáš ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
The logo component will be produced in a series of 8000 pcs. It will be made from sheet metal 0.5 mm thick stainless steel 17 040. After evaluation of possible modes of production, chosen technology is stamping non rigid tools Guerin. As a medium is used POLYTAN. Literary study is focused on the analysis of this technology. Semi-finished product have circular shape with a diameter of 104.9 mm. Semi-finished product will be produced by use cutting waterjet from steel sheet of size 0.5x1250x2500 mm. Utilization of the steel sheet is 76.58%. The forming components are powered by hydraulic press ŽĎAS corp. Cth400 and a nominal force of 4 MN. This machine is in a manufacturing company available. On the basis of design calculations is chosen comply a tool for Guerin method. When you set a margin 30%, the total profit from the production is 24 096 CZK.
Forming of thin-walled tubes
Baránek, Tomáš ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
This work brings a synopsis of technologies used in the process of thin-walled tubes forming as well as their evaluation. There are various forming methods applied in order to achieve a required shape e.g. tube bending, radial tube tripping and tube forming. The bending is done by several means e.g. collaring, reeling and pressing. In the pipe bending operation the tube may get deformed. Thus there might occur the following bending defects e.g. wall thinning, excessive flattening, wrinkles in the bend, tube suspension. At the radial tube tripping may occur local tube tapering or tube diameter attenuation. Tube forming is dividend into inlet, outlet and flattening.
Design of bending tool for thin-waled copper tubes
Axmanová, Hana ; Peterková, Eva (referee) ; Dvořák, Milan (advisor)
AXMANOVÁ Hana: Design of bending tool for thin-walled copper tubes The project elaborated in frame of bachelor studies branch B-STG is submitting design of the bending tool for the thin-walled copper tubes. There where designed two bending tools with inner bending radius R1 = 13 mm and R2 = 45,2 mm and the bending is implemented by broach into the bending die. There were conducted some bending experiments. The tubes were bended without and with filling by a hand hydraulic press WPP15.
Stretch forming with tensile force
Kužela, Josef ; Samek, Radko (referee) ; Peterková, Eva (advisor)
The submitted work developed within the bachelor study B-STI Mechanical engineering deals with bending technology in combination with tensile force. The work is created on the basis of literary study overview and description of the principle of bending technology with the tensile power, a description of the methods, tools and machines used, advantages and disadvantages of the above methods and examples of modern production processes and manufactured parts. The work also includes a comparison with simple bending method.
Shear spinning technology
Povalač, Tomáš ; Dohnal, Ivo (referee) ; Peterková, Eva (advisor)
Submitted work fully fashioned within the frame of bachelor study B-STI Mechanical engineering, is specialized for shear spinning technology. On the basis of study and own experiences are presented problems spinning, technologies exploited the process of spinning, machines and tools for shear spinning.
Manufacturing of driving chain gear
Řiháček, Jan ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
This thesis deals with the production of driving chain gear, made from sheet metal 14 220.3, with a thickness of 8.0 mm. Set production series is 150 000 pieces per year. After the analysis of possible production methods was choosed fine-blanking technology as productive metod. It was elaborate the proposal of technological solution and constructional design involves selecting of the appropriate blank (sheet metal 8 x 1250 x 2500 mm), design of cutting tool with its documentation and the choice of production machine (triple-action hydraulic press Feintool HFA 3200 plus). In the last part of thesis was done an economical evaluation to assess the efficiency of the production.
Machines and tools for straightening of semi-finished products
Jun, Tomáš ; Varjan, Matúš (referee) ; Peterková, Eva (advisor)
JUN Tomáš: Machines and tools for straightening of semi-finished products This dissertation, prepared in the context of the study branch of Mechanical Engineering B-STI, presents an overview of machines and tools for straightening of semi-finished products. Based on a study of literature and on internet research, the dissertation analyzes straightening technologies, straightening machines and special straightening methods.
Utilization of an elastic tool made of polyurethane in forming technologies
Zigáček, Štěpán ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
ZIGÁČEK Štěpán: Utilization of an elastic tool made of polyurethane in forming technologies This project elaborated within bachelor study program B-STI Mechanical engineering is literary study focused on manufacturing methods of forming by elastomers. The recherche deals with the basic division and principles of all possible utilizations of elastomers focusing on the usage of polyurethane with examples and evaluation of their advantages and disadvantages.
Forming machines and tools
Stránský, Luboš ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
The Bachelor thesis provides a brief overview of the various types of machines and tools used in metal forming. The paper discussed today and earlier used types of machines and tools.The basic types of machines are: a mechanical presses, hydraulic presses, hammers and rotary thermoforming machines. For each type are explained principles, characteristics, advantages and disadvantages.
Forming using elastomers
Polívka, Pavel ; Peterková, Eva (referee) ; Podaný, Kamil (advisor)
The bachelor's thesis contains a current literary study with focus on the production of components by elastomers in applications forming. The study contains an explanation of each of the special methods, their comparison with classical methods in forming, the assessment of their propriety or impropriety, and demonstration of usage.

National Repository of Grey Literature : 199 records found   beginprevious166 - 175nextend  jump to record:
See also: similar author names
1 PETERKOVÁ, Eleonora
Interested in being notified about new results for this query?
Subscribe to the RSS feed.