|
|
The concrete structure of a high office building
Skuhravý, František ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
Aim of The Diploma Thesis was to design load-bearing structure of a multi-storey reinforced concrete building, to realize structural analysis in Dlubal-RFEM software and dimension its selected parts. Designed structure is based on already erected building in office edifices campus in Brno-Slatina district. Its original number of storeys was increased from ten to nineteen, so the specific problems connected to high-rise building designing could be solved. Time dependent deformations of vertical structures were analysed in detail, so the changes in load of horizontal elements could be described more precisely, because of its direct dependence on compression of the columns. Within the paper, foundation structure dimensions were designed, assessment and design of composite columns assembly were made, as well of floor slab in 2nd floor with column deformations impact check on the 17th floor. Also, the external walls, pillars and shear core walls were designed and assessed. Formwork drawing of designed structure parts and detailed drawing of reinforcement of assessed elements were elaborated. Based on Diploma Thesis results it can be stated, that if influence of nonuniform load of vertical structures within the high-rise building designing is neglected, consequent project would presumably be uneconomic, or dangerous after an optimization attempts.
|
|
|
Overground Parking House
Pevner, Jan ; Klodner, Jan (referee) ; Perla, Jan (advisor)
The work focuses on the design and assessment of selected structural elements of one overground floor monolithic concrete structures and staircases. All calculations are done in accordance with Eurocode 2.
|
|
|
Structure of apartment building
Řihošek, Jan ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The diploma thesis deals with the design of the floor structure of an apartment building in two structural variants. The aim of the work is to find out the internal forces, design and check in two construction variants. Finite Element Method was used for calculation internal forces using 2D model for floor slab and 3D model of building in the Dlubal RFEM 5.24. The work also includes check of masonry walls.
|
|
|
Variant solution of concrete flat slab supported by columns
Fárková, Karolína ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The thesis focuses on the design and assessment of a locally supported ceiling slab. The slab was designed in two variants: a reinforced concrete slab and a prestressed slab, both of which were subsequently approximately economically evaluated. To calculate internal forces, a 3D model was created using the FREM 5 program. The structural analysis was conducted using the finite element method and the method of equivalent frames. Both slabs were assessed for ultimate limit state and serviceability limit state.
|
|
|
Multi-storey precast structure
Polák, Marek ; Šimůnek, Petr (referee) ; Perla, Jan (advisor)
The final thesis is focused on reworking hospital pavilion from cast-in-place structure to precast concrete frame. Calculation of internal forces is made by software system SCIA Engineer. Main load-bearing elements are inner beam, outside beam and all columns in axis 2-C. This thesis contains assembly report, structural design, calculations and drawings of the designed parts, joint details, assembly material drawing and hand calculation.
|
|
|
Cast-in-plase concrete member of multi-storey structures
Vařecha, Daniel ; Perla, Jan (referee) ; Strnad, Jiří (advisor)
The bachelor thesis is focused on the design and assessment of the supporting parts of the multi-story monolithic building of Větřní paper mill. Part of the thesis is accompanying report for static calculation and technical report on construction, visualization, static calculation and drawing documentation of shapes and reinforcement. Calculation of internal forces in the building was done in SCIA Engineer 17.1 software.
|
|
|
Concrete flat slab supported by columns
Neuschl, Marcel ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
The aim of bachelor thesis was to design locally supported ceiling slab, according to the assignment of the lead work. During designing were used three static methods that work compared (additivity method of moments, method of replacement frames and finite element method using software RFEM - Dlubal). Own design of structure defected to the results of the finite element method.
|
|
|
Concrete flat slab supported by columns
Achillesová, Jana ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
The aim of the bachelor thesis is to find out the internal forces on the point-supported reinforced concrete flat slab that is located above the underground garages of the department store. The methods used for the analysis were moment coefficient method, replacement frame method and Finite Element Method in the Dlubal RFEM program. Draft and appraisal of one column are also part of the thesis.
|
|
|
Indoor swimming pool - concrete tank construction
Pőthe, Péter ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The aim of the diploma thesis was to design reinforced concrete construction of the indoor swimming pool and ensure impermeability of the construction, to ensure behavior as concrete tank construction. Static analysis was done by using program Dlubal RFEM 5.12, where interaction of subsoil with construction was taken into account. Slabs around the swimming pool area were divided into expansion section because of temperature changes from glass façade an after that the sealing of expansion gap was solved. Construction system under the swimming was designed and was tested the behavior of walls and slabs. Analysis was done also to considerate of hydration heat. The drawing was done by software CADKON RCD.
|
|
|
Precost concrete building
Hubený, Radim ; Švaříčková, Ivana (referee) ; Perla, Jan (advisor)
The bachelor thesis deals with solutions for all load cases, design and assessment selected elements of precast concerete building. As the part of the thesis is modeling of object in software RFEM and design documentation. Structural elements of design are beam, purlin, column. In the calculation takes into account installation and operational status.
|
guest ::
