|
|
Abrasive water jet cutting
Midrla, Zdeněk ; Kubík, Roman (referee) ; Osička, Karel (advisor)
This master thesis is consisted of literature search and practise part with focusing on the theme of abrasive water jet cutting. Introductory chapters deal with various methods and principles water jet cutting. Following chapters deal with quality of cutting surface by abrasive water jet cutting. After these chapters is introduced machine equipment of water jet cutting technology. At the end of this theoretical part are listed advantages and comparison with other unconventional technologies. In the practical part is solved design of machinery with regard to manufacturing technology of component flange in series 630 000 pieces per year. Last chapter describes economic evaluation of production.
|
|
|
Machining of the gear-box casting on a CNC machine
Hložek, Milan ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The master’s thesis focuses on the machining of a chosen gearbox on a CNC machine. The theoretical part deals with gearboxes in general and the aluminium alloy from which a selected gearbox is manufactured. In the practical part, the machining of the gearbox is proposed according to the corresponding drawing. Gradually suitable machines are selected, then depending on their limits, clamping devices are designed, next a set of tools is selected and an NC program is generated. The technological process of production is proposed and the basic production costs are calculated.
|
|
|
On the production of an agricultural machinery part and its optimization
Tenora, Tomáš ; Osička, Karel (referee) ; Píška, Miroslav (advisor)
This master's thesis deals with the process of machining a forged connecting rod in cooperation with the company Zetor Tractors a.s. The first chapter of the thesis is focused on a detailed introduction of the company. The second chapter includes an elaborate analysis of the technical documentation and requirements concerning the making process of the subject of study, specifically the construction of the connecting rod. In the third chapter, the current production technology is discussed and described in detail. The aim of the fourth chapter is to propose an innovative technology which can be used for the production of connecting rods in the required quality. The fifth chapter is aimed at testing the newly designed technology. In the final, sixth, chapter, a technical and economical evaluation of the proposed procedure is performed.
|
|
|
The unconventional Method of Cutting Water Jet
Prax, Ondřej ; Slaný, Martin (referee) ; Osička, Karel (advisor)
The master thesis contains a literature search dealing with the unconventional technology of water jet cutting. The first part is aimed to description of the water jet technology and shows the possibilities of controlling and awarding data for cutting. Follows the chapter about the influences of the input parameters to a surface quality and machining accuracy. The thesis also giving an account of ecological factors of the water jet cutting. The description of the whole technology for production of the sprocket is a part of the thesis. The last part of the thesis is solving the economics of the water jet cutting technology, especially for production of the sprocket with comparing dependency of the cutting conditions.
|
|
|
Use of laser technology in conditions of job-order manufacture
Popela, Martin ; Slaný, Martin (referee) ; Osička, Karel (advisor)
The thesis is focused on theoretical analysis and physical description of laser beam technology. It deals with possibilities and concrete methods of laser technologies in perspective of metal machining and in detail it describes CO2 laser and its inclusion to the manufacturing process in concrete engineering company. Further it describes the components base and the construction technology of typal representatives. The thesis includes the proposition of solution of increase the productivity of the laser workplace and also technical and economical evaluation of this technology.
|
|
|
Cutting of supporting profiles on building
Protivínský, Pavel ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis deals with technology for material cutting on the building site. Firstly, there were described different methods for material cutting, their principle, reached quality of section, demands for requirements on Occupational safety and health (OSH) and there are described different qualification of device operators. Secondly there were described specific condition in a mobile building site. Eventually, there are compared all the examined technologies after the experiment according to different criteria.
|
|
|
Machining of aluminum alloy component
Lačňák, Martin ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
The thesis focuses on the technology of production of the turbine-type component in Edwards company. It specifically focuses on the part of the turning production, in which in the first part an analysis of the component and the technologicity of its construction is created. Problematic aspects are analysed in terms of material structure and procedure technology. An evaluation of the former and the new supplier is made in terms of rationalization of material structure and their statistical evaluation of rationalization improvement towards keeping to geometrical tolerances. Grooving tools greatly influence the overall machining time during turning. An experiment is made to find out the measured values of the radial forces, the process of chip formation and surface roughness during grooving. The technology of procedure further deals with rationalization of the current machine OKUMA LU25-M and purchase of a new machine Mori Seiki NTX 2000, for which new tool equipment is made in cooperation with Walter company. The final technical-economical evaluation sums up all findings from the research of the given issue. In the discussion, further continuation is suggested for the research in the development and for the continuously controlled component productivity.
|
|
|
Production technology of drill
Křehlík, Luboš ; Kolář, Ladislav (referee) ; Osička, Karel (advisor)
The work deals with production technology stepped drill of cemented carbides. Handles the basic methods and information technology grinding. Cemented carbides are becoming more frequent choice of material for processing in many industrial directions. They allow widespread use due to their mechanical and technological properties. Tools of this material are manufactured on a 5-axis grinding machines. The use of precision CNC machines enables efficient and accurate production of both simple and complex cutting tools. Software CNC machines allow you to control the 3D simulation before production begins, it's a convenient tool for checking the functionality of the program. It is also possible to establish the production of the subsequent dimensional control of the finished piece. These CNC machines and cemented carbide tools can be used for both serial and piece production.
|
|
|
Cutting of Water Jet
Zouhar, Ondřej ; Slaný, Martin (referee) ; Osička, Karel (advisor)
The work developed in the master's program, describes the technology of water jet cutting. The theoretical part deals with the description of this technology and it explains the basic concepts used in this field. The practical part was designed to verify some theoretical knowledge. Therefore, several experiments were performed, while there was studied the influence of abrasives on the final quality of the surface and the level of the generated noise. The practical part was completed by the production of the selected component and its technical and economic evaluation.
|
|
| |
guest ::
