|
|
Recyclation of dust from production of dry mortar blends
Ondrůšková, Nela ; Novotný, Radoslav (referee) ; Šoukal, František (advisor)
The work deals with the problem of disposal of ever-increasing waste (dust) from the production of building materials and examines the possibility of recycling dust dust into cement repair mortar. The aim of this work was to determine the composition of individual dust particles from the production of cement mixtures and to determine their mechanical properties, as well as to determine the ideal ratio of dust particles to each other when mixing the dust mixture and its mechanical properties. This mixture consisted mainly of dust from products based on Portland cement, aluminous cement, gypsum and lime hydrate. The mixture further replaced part of the cementitious mortar and the impact of the additive on the mechanical properties of the cementitious mortar was determined. X-ray fluorescence spectrometry was used to determine the elemental composition, and X-ray diffraction analysis was used to determine the mineralogical composition. Test specimens were prepared according to the ČSN EN 12390 standard. Mechanical strength tests were performed on the test specimens. A large part of the test specimens could not be subjected to mechanical tests because the test specimen did not solidify even after a long time. The individual measurements that could be made show that the mechanical properties of the dust samples show values which have shown that the dust cannot be recycled into the product due to its instability. Dust particles have too diverse composition and in combination with cementitious repair mortar do not have the required properties. The problem is especially the sampling from the data, which did not solidify at all and thus excluded the remaining samples with already good properties of the same sample. When designing the method of recycling, it was necessary to take into account which product of the company is most in demand, where recycling would also make economic sense, which is also an important indicator for the operation of the company today. Dust particles could prove successful in another product, but it would not be advantageous for the company now, so now the recycling of dust particles will not start and they will be further disposed of in the same way.
|
|
|
Reactive powder concretes (RPC) with redispersible polymer powders
Ondrůšková, Nela ; Másilko, Jiří (referee) ; Šoukal, František (advisor)
The thesis entitled "Reactive Powder Concretes (RPC) with Redispersible Powder Polymers" deals with the description, design and development of a material with increased ballistic resistance, i.e. with increased resistance to high-speed dynamic stresses due to interaction with a projectile. The high mechanical properties of RPC are achieved mainly by reducing the water coefficient, using a large dose of superplasticizers and high strength aggregates to achieve the densest possible structure. The aim of this work is to investigate the effect of addition of redispersible powder polymer to RPC composite and to find the optimum type and amount of polymer to form a co-matrix, thus improving material properties such as flexural tensile strength and toughness. The preparation, procedure and processing of each formulation are described in each chapter, and the properties of these materials and observations of their behaviour under ballistic loading are described. Experimentally, the thesis focused on monitoring the effect of polymer type and amount, particularly on the change in bulk density and on compressive and flexural tensile strength. The results obtained for the different formulations were compared with each other and related to a reference. SEM analysis was performed to monitor the polymer film formation in the matrix. Based on the tests, two formulations with the best comprehensive properties were selected. These two formulations were subjected to DOP ballistic test.
|
|
|
Recyclation of dust from production of dry mortar blends
Ondrůšková, Nela ; Novotný, Radoslav (referee) ; Šoukal, František (advisor)
The work deals with the problem of disposal of ever-increasing waste (dust) from the production of building materials and examines the possibility of recycling dust dust into cement repair mortar. The aim of this work was to determine the composition of individual dust particles from the production of cement mixtures and to determine their mechanical properties, as well as to determine the ideal ratio of dust particles to each other when mixing the dust mixture and its mechanical properties. This mixture consisted mainly of dust from products based on Portland cement, aluminous cement, gypsum and lime hydrate. The mixture further replaced part of the cementitious mortar and the impact of the additive on the mechanical properties of the cementitious mortar was determined. X-ray fluorescence spectrometry was used to determine the elemental composition, and X-ray diffraction analysis was used to determine the mineralogical composition. Test specimens were prepared according to the ČSN EN 12390 standard. Mechanical strength tests were performed on the test specimens. A large part of the test specimens could not be subjected to mechanical tests because the test specimen did not solidify even after a long time. The individual measurements that could be made show that the mechanical properties of the dust samples show values which have shown that the dust cannot be recycled into the product due to its instability. Dust particles have too diverse composition and in combination with cementitious repair mortar do not have the required properties. The problem is especially the sampling from the data, which did not solidify at all and thus excluded the remaining samples with already good properties of the same sample. When designing the method of recycling, it was necessary to take into account which product of the company is most in demand, where recycling would also make economic sense, which is also an important indicator for the operation of the company today. Dust particles could prove successful in another product, but it would not be advantageous for the company now, so now the recycling of dust particles will not start and they will be further disposed of in the same way.
|
guest ::
RSS feed.