|
|
Mechanical durability of waterproofing membranes against elements of waterproofing membrane construction protection
Remeš, Josef ; Oláh,, Jozef (referee) ; Novotný,, Marek (referee) ; Novotný, Miloslav (advisor)
Waterproofing membranes are one of the most commonly used waterproofing insulation materials. These can be found both in assemblies of roof constructions and substructures and are a key component for waterproofing systems. During design process it is necessary to select materials, elements and accessories so that mutual compatibility, waterproof effectiveness and reliability is ensured. In order to protect the main waterproofing layer a composition is therefore completed with construction protection elements, which are meant to prevent from a mechanical damage of waterproofing membrane. Mechanical stress and damage may become evident in variety of situations, which can be caused externally not only as an inappropriate ground bashing procedure but also as a consequence of improper waterproofing construction protection. In practice there are many cases of waterproofing system failures due to stress of elements with higher mechanical durability which affect elements with lower mechanical durability. The dissertation deals with an application of dimpled membranes protected by the layer of waterproofing membranes, which may due to stress and mutual compatibility result in waterproofing system failure and waterproofing reliability decrease. The dissertation is focused on mechanical durability of waterproofing membranes made of folio and modified bitumen membrane against damage from dimple membrane depending on stress category. First, possible waterproofing membrane damage from dimple extrusion is calculated and evaluated. The next part deals with verifying by experiment based on an effect of long-term static stress and short-term dynamic stress caused by ground bashing, where a measurement of ground bashing stress is performed. Experiment interpretation and an acquired knowledge provided the dissertation with an information what combination and order of particular layers results in higher risk of waterproofing system failure and waterproofing reliability decrease
|
|
|
Reconstruction of residential building
Pavlíček, Jan ; Tichomirov,, Vladimír (referee) ; Novotný, Miloslav (advisor)
The subject of this final thesis is prepared detailed project documentation for the reconstruction of apartment building on Karáskovo Square in Brno - Židenice. The existing building is rectangular and is a part of a apartment terraced buildings. Residential building has a basement and three floors and an attic. The main entrance is oriented to the southwest. Foundation structures are concrete, vertical support system is a brick wall, roof structure is wooden roof standing stool with pleated ceramic tiles.
|
|
|
City Office of Nový Bydžovv
Vaníček, Martin ; Tichomirov,, Vladimír (referee) ; Novotný, Miloslav (advisor)
Diploma thesis is about design and making of execution project for office city building which is located in Nový Bydžov. The building is located in the late brownfield area of Dufek´s wood manufacture, which is on the south part of Nový Bydžov. The building has four above ground floors and one below ground floor. The building shape is rectangular of dimensions 53,02 x 17,62 m. On the south, west and east is the façade from height of second floor slightly cantilevered. On the east part the edge of cantilevered façade duplicate slopping edge of the bottom land and it creates wonderful but economical shape. The height of the building from the ground is 14,5 m. The shape of roof is flat, covered with the mPVC foil and gravel mound. Façade which covering the first ground floor is made of polystyrene with thin layer of plaster which creates building plinth. Top cantilevered façade is made of ceramic tiles of dimensions 1200 x 600 mm which are suspended behind the air layer. The ceramic tiles are light brown color. In the bottom part are glazed areas of rectangular and square shapes to create the open feeling in the ground floor. In the rear part is designed coffee bar with nice outside wooden terrace. Windows in the top cantilevered part of the façade are the circular shape and extend the architectural impression of the building. All windows are in the same color of dark blue. The steel parts of the building are also dark blue color. In the bellow ground floor are designed underground parking lot with the maximum capacity 29 cars and technical equipment. In the first floor above ground are designed reception, big lecture hall, exhibition hall, coffee bar with terrace and toilets. In the second floor above the ground are offices, computer room and HVAC equipment. In the third above floor are offices, conference hall, and IT equipment. In the fourth floor above the ground are also offices, maintenance room and storage of furniture.
|
|
|
Multifunctional houses in Řečkovice
Půtová, Lucie ; Tichomirov, Vladimír (referee) ; Novotný, Miloslav (advisor)
The diploma thesis focuses on the design of a new construction of a multifunctional building in Řečkovice. The construction consists of two separate blocks connected by a basement storey with common garages. Each block has three above-ground storeys. On the first basement storey there are garages and technical facilities. On the above-ground storeys there are commercial units with own entrances from the exterior and own sanitation facilities. Furthermore there are flats of varying sizes: from single-room flats with a kitchenette to four-room flats with a kitchenette. One of the flats has been designed as adaptable (wheelchair accessible). All the flats have a recessed balcony or a terrace facing southwest. The construction is built on shallow foundation constructions. The first basement storey is from monolithic reinforced concrete. The above-ground storeys are built from Kalksandstein sand-lime blocks. The exterior walls are insulated with a contact thermal insulation system. The construction is covered by flat roofs.
|
|
|
Multifunctional facility - Mikulov
Novotný, Miloslav ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
Diploma thesis is focused on design and elaboration of detailed design of multifuncional object in Mikulov na Morave, the parcel number 6905, 6910 and 6919. Proposition of the object respects both commune plan and current street buildings. It‘s not supposed to create stress with its shape and size, but complete actual buildings. It has three elevated floors, one basement and mono - pitched roof. Object has laboratories, offices and conference room, it‘s determinate for study purpose.
|
|
|
Family House with Parlor Světlá
Vondál, Pavel ; Tichomirov, Vladimír (referee) ; Novotný, Miloslav (advisor)
This bachelor’s thesis deals with the processing of project documentation for detached house with establishment. The building is situated on the outskirts of Světlá. The living area of the house is designed for permanent living of 4 people. The establishment is designed as hairdresser's. The house is connected to garage. Above the garage is flat roof with terrace function, above the living part is saddle roof. The house is two-storey with a partial basement. The bricked construction system is made of polished ceramic blocks Porotherm. Ceramic blocks are insulated with expanded polystyrene. The building is designed in slightly sloping terrain.
|
|
|
Detached family house, Šutovce
Juríková, Veronika ; Novotný, Miloslav (referee) ; Müller, Jan (advisor)
This thesis describes the design of detached house which is situated in the cadastre unit of the town of Šutovce. The building is a two-floor, without cellar, located in sloping terrain. The garageis part of the detached house. The building is designed for a four-member family. The structural system is designed of masonry system Heluz. The roof is designed as a hipped roof from timber girders with metal roofing, roof slope 10°. The work includes project documentation for the construction.
|
|
|
Flat House Staré Město
Dobiáš, Daniel ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
The subject of the bachelor thesis is the design of a flat house in Staré Město. The building has a basement and four above-ground floors. Flat house has a total of 12 residential units. In the basement there is technical room, cellars, a drying room, a bicycle shed and one residential unit. On the first, second and third above-ground flours there are three residential units. On the fourth above-ground flour there are two residential units. The building is based on foundation strips. The construction system of the building is a wall made of Heluz ceramic blocks. The horizontal supporting structures are created from a folded ceiling structure from POT beams and Heluz MIAKO inserts. Flat house is covered with a single-layer flat roof. Movement between floors is ensured by a reinforced concrete monolithic staircase and ane levator. There is a parking lot in front of the building and next to the building.
|
|
|
Flat House
Kaválek, Daniel ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
In my bachelor´s thesis, I´ve designed an apartment building located in Prague Čakovice. The building is placed on an even plot at the Čakovice housing development area. There are three above ground floors with ten residential units and one underground floor with a common garage. Every residential unit has its own balcony and a cellar unit. Sixteen parking spaces are available in total. Furthermore, each flat on the 1st above ground floor comes with a terrace and a private garden. The comunication spaces consist of the entrance hall, a three-flight staircase, and an elevator leading to all the floors. On the above ground floors, the vertical bearing and separating structures are made of ceramic blocks, on the underground floor of reinforced concrete. The perimeter walls are thermally insulated by a contact insulating system. The horizontal bearing structures are made of reinforced monolithic slabs of concrete. The roof is flat, single-ply.
|
|
|
Multifunctional building Vavřinec
Šiková, Renata ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
The topic of the Master's Thesis is the design of a new multifunctional house on the border of the Moravian Karst. The building is located on the edge of the village of Vavřinec and is consists of a total of a three buildings - Boarding house, Restaurant and Barn. The effort was to create a modern complex that will architecturally merge with its surroundings, preserve the harmony of the place and respect the character of the surrounding buildings. The complex is used for recreation, accommodation and catering. The advantages of the complex is a large barn allowing for social events. These functions are complemented by a small restaurant for tourists, which also serves breakfast for the accommodation guests. Small events can also be held on the second floor of the restaurant, where there is a multifunctional space. All three buildings are rectangular in plan with a pitched roof, oriented in such a way as to create an internal quiet space. Due to the connection of operation of the building, they are connected by means of single-story necks, where the entrance reception or sanitary facilities are located. Pension is a two-storey building, with partial basement. In the above-ground floors there are rooms and accessories, in the underground there are technological facilities and storage spaces, the Boarding house building is connected with the Restaurant building by a basement. In the Restaurant there is a kitchen with storages and accessories. The barn has an open space with large french windows and an admitted roof structure. The basement's vertical load-bearing walls are made of concrete blocks. The above ground walls are designed in Heluz ceramic blocks with a mineral wool ETICS contact insulation system. Horizontal load-bearing structures are cast-in-place reinforced concrete. The roofs are flat with extensive vegetation or pitched with metal roofing and thermal insulation above the rafters.
|
guest ::
RSS feed.