|
| |
|
|
Numerical Analysis Of A Mass Separator
Mačák, Martin
The presented work investigates numerical approach to the movement of charged particles. Custom model describing electromagnetic forces on particles was created and implemented into ANSYS FLUENT. This model was then used for a simulation of a simplified version of a mass separator. Results were then compared to the theoretical results which were closely comparable.
|
|
|
Smart home control unit with Raspberry Pi
Sedlařík, Marek ; Mačák, Martin (referee) ; Vyroubal, Petr (advisor)
This bachelor’s thesis deals with the issue of smart home controlled primarily by voice. The thesis introduces this technology, with its development and with trends it is heading to. It contains description of IoT architecture, communication and transmission technology. The attributes and use of the single-board minicomputer Raspberry Pi are described and compared with individual models. The large part of this thesis deals with the design of control unit for smart home system, which will consist of suitable components and microcomputer Raspberry Pi with operating system Raspbian, where the virtual assistant Amazan Alexa is integrated. The last part deals with the design, modeling and printing of a plastic cover for a intelligent speaker.
|
|
|
Application of graphite in thermal management of microelectronics
Havlíček, Václav ; Mačák, Martin (referee) ; Vyroubal, Petr (advisor)
Tato práce je zaměřena na zlepšení tepelného managementu mikroelektroniky implementací materiálů na bázi uhlíku, přesněji grafitových fólií, do tepelné architektury mikroelektroniky. Práce začíná vysvětlením současných metod chlazení a výzev v oblasti mikroelektroniky. Poté přechází k běžně používaným materiálům - hliníku a mědi a přidává do výběru i uhlíkové alotropie. Ve druhé části tato práce obsahuje několik příkladů použití pyrolytické grafitové fólie v tepelném managementu mikroelektroniky, prokazuje jeho použitelnost a analyzuje přínosy pro šíření tepla, tepelnou vodivost při dodržení elektrické izolace a možné využití ve flexibilní elektronice.
|
|
|
Editor of Relational Tables
Macák, Martin ; Urbanovský, Pavel (referee) ; Šárfy, Martin (advisor)
This thesis deals with aspects of using the common, universal relational table editor as a simple information system, which would be fully independent on the underlying database system and partially independent on the underlying's database schema. One part of this thesis deals with potential of using such universal information system to create a framework to allow fast and easy development of small and medium information systems. The practical part of this thesis is the application, which implements the basics of simple relational table editor, which is fully independent on the underlying database provider and schema and servers as the demonstrative table editor.
|
|
|
Load tests of non-IT parts of data centers
Víteček, Aleš ; Mačák, Martin (referee) ; Vyroubal, Petr (advisor)
The thesis "Load testing of non-IT parts data centers" deals with the theoretical analysis of data centers with a focus on non-IT part and theoretical preparation for measuring stress tests focused mainly on cooling. The theory is followed by a practical part of the PEC measurement by CATEGORY a.s .. This sample measurement carried out at the company premises clearly outlines the importance of performing similar tests. The measurement is thoroughly evaluated and suggestions are made to improve the operation. The next part of the practical part contains simulation of sample measurement. This simulation serves as a convenient addition and comparison. Also this simulation, the importance of similar stress tests can be justified.
|
|
|
Testing of selected material properties for 3D printing
Čáslavský, František ; Mačák, Martin (referee) ; Vyroubal, Petr (advisor)
This thesis deals with 3D printing, materials used for 3D printing, testing of the materials and learning their real parameters. Goal of the thesis is comparing selected materials, executing series of mechanical test and selecting suitable material for printing high-quality plastic parts for use in automobiles, especially for reproduction of parts that are no longer made for oldtimers and for use in motorsport.
|
|
|
Analysis Of Contact Disconnection In A Low
Voltage Circuit Breaker
Mačák, Martin
This work deals with a simulation of plasma phenomenon and with a simulation of an arc ingnition between contacts in a low voltage circuit breaker. Simulations were made in Ansys Fluent with the usage of MHD (Magnetohydrodynamic) add-on module and additional UDFs (User Defined Functions). Mathematical model presented in this work connects electric and magnetic field, which is not possible in Ansys Fluent by default.
|
|
|
Modeling of magnetohydrodynamic phenomena
Mačák, Martin ; Maxa, Jiří (referee) ; Vyroubal, Petr (advisor)
Theoretical part of this thesis is dedicated to the theoretical basis of electric conduction phenomena in fluids and method of calculation of magnetohydrodynamic phenomena. In the experimental part, computational modules have been developed to complement and augment the use of commercial simulation programs for simulation in the field of magnetohydrodynamics. On practical examples of mass spectrometer simulation, Einzel lens, electron movement and electric circuit breaker, the functionality of the computational models and the correctness of the obtained results were documented. Created computational modules can be used to design and optimize products using magnetohydrodynamic phenomena.
|
|
|
Analysis of the fluid mixing in the circulation reactor
Mačák, Martin ; Vyroubal, Petr (referee) ; Maxa, Jiří (advisor)
This work deals with an analysis of the fluid mixing in pilot plant loop reactor. Multiphase flow was simulated with calculation of velocity of flow and volume fraction of individual immiscible phases in hydrogenation reactor for aniline production. Parameters of flow were reviewed in individual parts of the device. Separate attention was paid to heat transfer through wall of the device with usage of external cooling. Designed model is applicable for optimalization and design of bubble loop reactors.
|
guest ::
RSS feed.