|
|
Newly-Built Detached House with Dental Surgeries in Brno-Žebětín
Matoušek, Jan ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of this bachelor's thesis is a design of a new building of a family house with dental surgeries in Brno – Žebětín, as well as elaboration of project documentation for realization of building construction. The building is designed for mixed use - there is stomatological surgeries available to the public in the 1st floor, and on the 2nd floor there is the owner's and his family's apartment. Both sections are separated from each other, including separate entrances to the building. The building will be located on the edge of the northern part of Brno - Žebětín. The location is slightly developed by family houses. The architectonical solution is designed with consideration of the building location and the character of the surrounding housing development. The part for living in the family house is designed for a family with three to four members. The house is detached, it is situated in a flat terrain and is designed as a partially basement. The designed building has two above-ground storeys and a basement, which has a garage for parking two cars and a technical facility of the building. Entrance to the garage is from the side of the building. The main entrances to the building are accessible from the adjacent outer curved staircase, copying the arched shape of the 1st storey facade. The section with dental surgeries on the 1st floor is designed as wheelchair accessible - for handicapped patients with limited mobility. The white solution of the facade of the house alternates with the use of a gray stone facing. The roof of the family house is designed as a single-layer flat roof.
|
|
|
Company Performance Evaluation Using EFQM Excellence Model
Matoušek, Jan ; Bartoš, Vojtěch (referee) ; Kocmanová, Alena (advisor)
The master thesis deals with performance evaluation of business corporation PBS POWER EQUIPMENT, s.r.o. This performance evaluation is done through START Model, based on the EFQM Model Excellence. The theoretical part is focused on the description of selected methods of performance evaluation of the company with an emphasis on EFQM Model Excellence. In the practical part PBS POWER EQUIPMENT, s.r.o. is introduced, it's economic activity is presented and on the basis of Model START performance evaluation is made. At the end, series of recommendations to improve the performance of the analyzed company is presented.
|
|
|
Application of Management Control System in a Business
Novotný, Richard ; Matoušek, Jan (referee) ; Žižlavský, Ondřej (advisor)
The aim of this diploma thesis is to analyze the financial plan of the engineering company PBS INDUSTRY, a.s. specifically in the segment of power engineering, which mainly deals with the custom production of equipment for major suppliers of energy and heating units, and to identify potential problems. Based on the identified problems, measures will be proposed to reduce costs, eventually to increase in sales. The financial plan will be made for the second quarter of 2022, it will be based on the plan drawn up by the company, while the proposed plan will reflect proposals for measures to improve the economic situation of the company.
|
|
|
Mixed-use Building in Tišnov
Matoušek, Jan ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of this diploma thesis is the design of a newly built mixed-use building in Tišnov, as well as elaboration a part of the project documentation for realization of the building construction. The designed building is a multifunctional building, which has the task of providing several functions. The building is situated in the South Moravian Region in the northern part of the village Tišnov, which is located about 30 kilometers away from the city of Brno. Recently, in this area new family houses and apartment buildings have been built. The building is designed as five above-ground storey, partially basement incl. a separate underground car park. The first floor serves mainly for commercial use, ie. for the provision of services and for the sale of goods. There is a coffee shop, a houseware store, hairdressers, bakers, butchers, or a gym. On the first floor there is also the main entrance to the building, and through there is further access to the upper or lower floors of the building. In the basement there is a technical background of the building and access to the underground parking. The second floor serves as office space for multipurpose use. There are apartments on the third, fourth and fifth floor, with some apartments on the 4th floor being designed as two-level maisonettes. The architectural design is based on the concept of straight lines and sharp edges, which also presents a flat roof roofing solution and receding storey with terraces. The building is detached, situated in a relatively flat terrain. All entrances to the building are designed as barrier-free. The white-blue color of the building facade alternates with the use of gray stone cladding. The roofing of the mixed-use building is solved on two levels by a single-layer extensive vegetation flat roof.
|
|
|
Cost Classification of Business Academy and Hotel School Třebíč
Matoušek, Jan ; Kršňáková, Iva (referee) ; Jakubcová, Marie (advisor)
The bachelor thesis is focused on the definition of cost classification in the Business Academy and Hotel School Třebíč. The first part is devoted to defining subsidised organisations, their classification in the national economy and characteristics of costs. The next part deals with cost classification of selected subsidised organisations between main and additional activities. The thesis contains suggestions which can stabilise management in cost classification.
|
|
|
Elevator cage
Matoušek, Jan ; Jedelský, Petr (referee) ; Pokorný, Přemysl (advisor)
This diploma thesis deals with design of a frame of a lift, whose roading capacity is 400 kg (5 people) and it olso deals with calculation of maximum distance between armatures of quides. Nominal speed is 1 m.s -1. This diploma thesis also includes final element analysis of the frame. The frame structure is analysed by software I – DEAS.
|
|
|
Construction of turning tool with internal cooling
Matoušek, Jan ; Maixner, Vladimír (referee) ; Zemčík, Oskar (advisor)
The bachelor´s thesis is partly focused on a general overview of turning and the turning tools with internal cooling. It describes the benefits and latest developments of this section at worldwide producers. There are a solution of a proposal of turning tools with internal cooling and its technological and economic evaluation in the second part of the thesis.
|
|
|
System for controlling optical fiber amplifier modules
Matoušek, Jan ; Horváth, Tomáš (referee) ; Münster, Petr (advisor)
This diploma thesis deals with the design of the telecommunication device for optical amplifiers and the implementation of the universal software for thecommunication with an optical amplifier. An universal control interface has been created to control modules remotely via the SSH remote access or via the LCD display and buttons on the device. The Linux security is listed in this thesis. The device was designed in the 1U case, where the front and rear panels and the arrangement of elements inside were designed. Subsequently, the functionality of the device and the communication with the LCD display and the optical module were tested.
|
|
|
Modern cutting tools for grooving and cutting-off
Matoušek, Jan ; Fiala, Zdeněk (referee) ; Píška, Miroslav (advisor)
The thesis in question deals with the influence of geometry of the cutting tool with a non-null angle r and of the cutting conditions on change of cutting tool’s overall deformation during the process of cutting-off and grooving. When conducting the experiments the loading of cutting tool was measured, there was created a simple 3D model of the cutting tool based on measured data, the deformation analysis of the cutting tool by the simulation programme ANSYS was performed and on the grounds of established facts there was made a conclusion on attributes of the cutting tool during the process of cutting-off and grooving.
|
|
|
Advanced FTP Server
Matoušek, Jan ; Urban, František (referee) ; Horváth, Tomáš (advisor)
This bachelor thesis deals with the FTP protocol and its possibilities to verify CRC checksums, to sort multimedia data by authors, genres, years and to create transmission statistics. These options were shown on FTP server GlFTPd. A PZS-NG plugin has been installed in GlFTPd for further setup. An IRC bot Eggdrop has also been installed. It allows the displaying of the information about the uploaded files and the server information to an IRC channel when using the ngBot script from PZS-NG. GlFTPd has been installed on a physical machine with a Debian Linux distribution.
|
guest ::
RSS feed.