National Repository of Grey Literature 313 records found  previous11 - 20nextend  jump to record: Search took 0.01 seconds. 
A comparison of different types of epoxy adhesives
Mihulka, Jan ; Žák, Ladislav (referee) ; Kubíček, Jaroslav (advisor)
This thesis is focused on a bonding technology. The first part describes the theory of the bonding and it is discussed the main areas of this technology. The experimental part deals with the comparison of four two-component epoxy adhesives in terms of shear strength. For the experiment it had been selected adhesives: Bison Epoxy Universal, Pattex Repair Epoxy Ultra Strong 5 min, Ergo 7430 and Letoxit LH 232. After performing the experiment, it was shown that Bison Epoxy Universal and Pattex Repair Epoxy Ultra Strong 5 min achieved the strengths stated in the datasheet. The strengths of Ergo 7430 and Letoxit LH 232 adhesives was lower than stated in their technological products, thefore, did not meet our expectations. The reason for not achieving the declared strength was probably poor dosing or insufficient mixing of ingredients.
Orbital welding assembly welds in the Nuclear Power by the TIG method
Lukášek, Zdeněk ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
The Bachelor's thesis looks at the possibility of using orbital welding by the TIG method on mounting welds in JE Dukovany. In the opening section, we deal with the issue of weldability, primarily carbon steels. Furthermore, the work focuses on TIG welding technology, both in the manual and mechanised way it details, including the advantages and disadvantages of both variants. In the experimental section, five test samples of ferric-perlithic material pipes were welded. The samples were assembled to simulate possible combinations that occur during pipeline assembly. Non-destructive and destructive controls followed, verifying the quality and mechanical properties of the resulting weld joints. In conclusion, the results of the trials were assessed and evaluated.
Repair TS tubes of the steam generator by manual welding
Zeman, Tomáš ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
This bachelor thesis deals with repair of heat exchange tubes of steam generator of Dukovany Nuclear Power Plant. Defects in the material of the collector of the steam generator were to such an extent that it was necessary to proceed with manual repair by workers inside the collector. A number of inspection welds, thorough training and preparation were performed to obtain the qualification of the repair. The repair was followed by a series of tests and trials, which ended in a satisfactory result and the equipment was put into operation.
Dependence of the laser weld geometry on the bevel size
Man, Antonín ; Kubíček, Jaroslav (referee) ; Mrňa, Libor (advisor)
This work deals with laser welding technology. It explains in more detail advantages and disadvantages, applications and direction in which this relatively young technology develops. The main topic of this work is welding of martensitic stainless steel with carbon structural steel. Components of this type can be found, for example, in the power industry, specifically the stator part of a steam turbine. Part of this work is also an experiment that will explain the dependence of the geometric dimensions of the material to be welded on the quality of the weld. The welded test specimens were subsequently tested by both the non-destructive and destructive methods. It can be stated from the results, that the size of the bevel does not affect the quality of the weld, nor geometry.
Manual versus orbital GTAW piping welding
Hofbauer, Jan ; Kubíček, Jaroslav (referee) ; Sigmund, Marián (advisor)
In thesis are compared options of stainless steel piping welding, orbital and manual version of method GTAW and GMAW. At the beginning, these methods are described theoretically and after that there are described materials used for fabrication two test welds on austenitic steel piping of diameter 168 mm. The first weld was made by orbital method GTAW, the second one by manual method GMAW. Next, these two welds are compared based on defects, welding parameters and width of heat affected area. The conclusion is that both welds are defect-free and because of economical aspects is better to use orbital GMAW method for this diameter of piping.
Electrophoresis coating
Holčapek, Jiří ; Kubíček, Jaroslav (referee) ; Žák, Ladislav (advisor)
This bachelor is based on a study of electrophoresis coating and corosion. The first part contains information about corrosion of metal and the importance of protecting metal parts. Then it deals with the technology of electrophoresis coating and technological process of creating electrophoresis coating. Finally, new trends in the field of electrophoresis coating are presented.
Plastic plating
Čermák, Jan ; Kubíček, Jaroslav (referee) ; Žák, Ladislav (advisor)
The perspective of the production of plastic parts has helped to spread the metallization of these parts on a large scale. Whether a coating is functional or just decorative. This bachelor thesis presents a comprehensive study, analysis, evaluation and comparison of the possibilities of creating metal coatings on plastic materials. The thesis deals with galvanic, chemical, vacuum and special methods of plating. For all the mentioned methods of plating, the technological procedure, equipment for plating, evaluation of individual methods and analysis of the use of plated plastic parts are given.
The block of flats
Kubíček, Jan ; Pilík, Václav (referee) ; Benešová, Romana (advisor)
This bachelor's thesis is focused on construction of an apartment building in quiet area of the town of Prostějov. Its appearance and purpose fit into the surrounding buildings. The free-standing object is a partially basement, it has parking space and approximately shape of rectangular. The apartment building is designed as a 4-storey building with one underground floor. There is a separate cellars for each of apartment unit in the basement. There are sixteen residential units in four floors, always 4 residential units per floor. Flat units have its own entrance to private terraces on the ground floor and to balcony in upper floors. The building is based on concrete foundation strips and is covered with a warm flat roof. The load-bearing system is a two-way wall system and is lined with ceramic blocks. Horizontal structures are cast-in-place reinforced cncrete. The vertical connection is ensured by a three-arm staircase that wraps around the elevator shaft. The work is developed to the level of project documentation for the construction.
Animation on the Periphery
Hanáková, Veronika ; Czesany Dvořáková, Tereza (advisor) ; Kubíček, Jiří (referee)
The thesis attempts to precisely describe the production of animation in the context of the state- socialist mode of production. Through the question of "autonomy" for cartoons and puppets films in the era of Kamil Pixa (1969-1985), we will try to specify the position of animation within the re- centralized organization and dramaturgical section in the Short Film. In the context of the normalization period, animation had a different position and function compared to the feature films. Using the example of a studio in Čiklova Street, we outline a model of making a puppet film that was more like a "craft workshop" that retained its notional autonomy as long as it had its own space.
The influence of welding parameters on the quality and mechanical properties of the weld joint
Vlach, Jan ; Stejskal, Ondřej (referee) ; Kubíček, Jaroslav (advisor)
The Master´s thesis focuses on the possibilities of using MAG welding on carbon steel 1.1221(C60E) without using preheating. It researches the effect of basic welding parameters on the final characteristics with the goal being to find a welding seam without defects, without using preheating.

National Repository of Grey Literature : 313 records found   previous11 - 20nextend  jump to record:
See also: similar author names
22 Kubíček, Jan
9 Kubíček, Jaromír
3 Kubíček, Jaroslav
3 Kubíček, Jindřich
1 Kubíček, Jiří
1 Kubíček, Josef
1 Kubíček, Jovan
22 Kubíček, Ján
Interested in being notified about new results for this query?
Subscribe to the RSS feed.