|
|
Design and realization of ADSR filter
Pokorný, Martin ; Kratochvíl, Tomáš (referee) ; Slezák, Josef (advisor)
The master´s thesis is focused on design of ADSR filter and voltage controlled amplifier (VCA). Three additional circuits performing analog signal processing are added. Functionality of designed circuits is verified in simulation program. All designed circuits are practically realized. Thesis includes complete design of the mentioned circuits and all necessary informations for its practical realization. All designed circuits are measured and the results are presented.
|
|
|
Matrix headphone amplifier for studio monitoring
Štěrba, Václav ; Petržela, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor´s thesis describes the design of a matrix headphone amplifier for studio monitoring. The proposed amplifier is a purpose-built device to be used in studio sound recording for the mixing of multiple audio channels directed to the interpreters´or performers´ headsets. The device is basically composed of the following parts: An input section for the audio line, a mixing section which secures the setting of individual input levels for each output, an amplifier section allowing the setting of the output signal level for each output, and an output section enabling the connection of headphones. The equipment utilizes a connection to a multi-channel audio signal bus; this bus also provides for remote power supply to all the connected devices. The solution described in the thesis can be defined as alternative monitoring that facilitates quick and easy connection of a required number of monitoring points (in other cases, such monitoring is usually realized by means of individual small mixing consoles).
|
|
|
Advanced Methods for 3D Video Capturing and Evaluation
Kaller, Ondřej ; Klíma, Miloš (referee) ; Masopust, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
Disertační práce se zabývá metodami snímání a hodnocení kvality 3D obrazů a videí. Po krátkém shrnutí fyziologie prostorového vnímání, obsahuje práce stav poznání v oblastech problému adaptivní paralaxy a konfigurace kamer pro snímání klasického stereopáru. Taktéž shrnuje dnešní možnosti odhadu hloubkové mapy. Zmíněny jsou aktivní i pasivní metody, detailněji je vysvětleno profilometrické skenování. Byly změřeny některé technické parametry dvou technologií současných 3D zobrazovačů, a to polarizačně-oddělujících a využívajících časový multiplex, například přeslechy mezi levým a pravým snímkem. Jádro práce tvoří nová metoda pro vytváření hloubkové mapy při snímání 3D scény, kterážto byla autorem navržena a testována. Inovativnost tohoto přístupu spočívá v chytré kombinaci současných aktivních a pasivních metod snímání hloubky scény, která vtipně využívá výhod obou metod. Nakonec jsou prezentovány výsledky subjektivních testů kvality 3D videa. Největší přínos zde má navržená metrika modelující výsledky subjektivních testů kvality 3D videa.
|
|
|
Class AB audio amplifier for two satellites and subwoofer
Cupák, Jan ; Brančík, Lubomír (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor’s thesis deals with design of AB class audio amplifiers. Further more it deals also with other functional blocks, e.g. preamplifier, tone equalizer and active crossover. Outcome of this work is a complete solution of the amplifier with it's simulation. In final solution is also included scheme of a high quality power supply unit, speaker protection and heat sinks for high performance transistors. In this project is also included a solution of task about optimal mechanical arrangement of the single parts in the case of this amplifier. This thesis contains results of measurement and photo document of functional prototype.
|
|
|
Bonding, the method for increasing DSL data rate
Kratochvil, Tomáš ; Benešl, Lukáš (referee) ; Šilhavý, Pavel (advisor)
This bachelor thesis focuses on characteristics of DSL bonding technology. The basic information about DSL technologies is described at the start of theoretical part of thesis. VDSL2 technology is described more thorougfully in comparision with other DSL technologies, because in this thesis DSL bonding is applied on VDSL2 technology. Next chapter of theoretical part of thesis describes principe of DSL bonding technology. Final chapters of theoretical part of thesis describes recommendations for testing of network characteristics. Specifically these network testing recommendations are described: RFC 2544, RFC 6349 and Y 1564. The results of performed tests are presented in practical part of thesis. Tested DSL technologies are compared based on results of performed tests at the end of practical part of thesis.
|
|
|
Switched resonant power supply
Štaud, Stanislav ; Vorel, Pavel (referee) ; Kratochvíl, Tomáš (advisor)
This thesis deals with desing of serial resonant converter with regulation output voltage in full bridge configuration like alternative power switching converter with pulse width modulation. The thesis includes analysis of serial resonant converter, desing power transformer, driving circuits. The thesis concludes with the functional converter and complete technical documentation.
|
|
|
Class D audio amplifier for laboratory measurements
Svorad, Adam ; Petržela, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
Bachelor’s thesis delves into a field of Class-D audio amplifiers. Keystone part of the work summarizes theoretical knowledge focused on measuring techniques of lowfrequency amplifiers and audio amplifier design. A deeper insight into building blocks of a general Class-D amplifier is also presented. Gained erudition is applied in the second part, which is devoted to a construction of the device. Exceptional attention is drawn to the design of robust external driver and sophisticated output analog filter. Blueprints required for a PBC layout are provided as well as outputs of performance measurements taken of a fabricated prototype.
|
|
|
System for Imaging of the Monochromatic Pictures in the Pseudo Color
Kaděrka, Petr ; Kratochvíl, Tomáš (referee) ; Říčný, Václav (advisor)
This diploma thesis treats the possibilities of the black-white picture depiction in pseudo colors (Pseudocolor). The individual methods, software or hardware are described there and the detailed block scheme of the system Pseudocolor is suggested. The block scheme is created on the basis of gained theoretical knowledge. In the thesis, individual functional blocks of the scheme are described and their circuit designs are realized. Some of the functional blocks are simulated by the PSpice program and accompanied by corresponding signal process data. The suitable choice of the active and passive components is performed, from which the general integration of the system Pseudocolor is made. All the source materials for the realization of the device are given there – double-sided drawing of the printed circuit, layout and specification of the components.
|
|
|
Audio D/A converter with external control using microcontroller
Špaček, Jan ; Stifter,, Jiří (referee) ; Kratochvíl, Tomáš (advisor)
This diploma thesis is devoted to the design of a laboratory measurement tool with DAC converter for audio and low frequency signals. In the introduction part a theoretical background of the ADC and DAC conversions are outlined. In the next chapters the technical solution of the laboratory converter is presented, including DAC with integrated circuit AD1852 and completed with digital audio receiver CS8416. This circuit secures compatibility with external audio devices with digital interfaces, like SPDIF or AES3. The digital receiver and audio DAC are added with serial communication interface for setup of the most audio and input parameters. This setup is operated by external microcontroller ATmega32 and original firmware. The thesis presents block diagram and schematic layout of the laboratory converter, including complete technical documentation for the construction and design.
|
|
| |
guest ::
RSS feed.