|
| |
|
| |
|
|
Static solution of bearing RC structure family villa
Neužil, David ; Kostiha, Vojtěch (referee) ; Švaříčková, Ivana (advisor)
Master thesis describes design of reinforced concrete structure for family villa. Building is situated to the slope. Only chosen parts of concrete structure was designed and checked for ultimate limit state. Building consist of basemen and two floors. Part of second floor is cantilevered. Cantilevered part was designed according to vertical deflection. Building foundation consist of waterproof slabs. Walls in contact with soil are considered as waterproof, as well.
|
|
| |
|
|
Design and assessment of the load-bearing part of the reinforced concrete structure
Tihelka, Marek ; Lagiň, Juraj (referee) ; Kostiha, Vojtěch (advisor)
The aim of the bachelor thesis is the design and assessment of a reinforced concrete foundation structure of a sports hall. The proposed solution is a monolithic foundation slab. The design software SCIA Engineer 22.0 was used to determine the reactions acting on the slab and slab internal forces. The reactions were also verified by manual calculations. The slab was assessed for ultimate and serviceability limit state and designed by hand. This work also includes design of reinforced concrete monolithic column. A drawing documentation was also prepared for both reinforced concrete slab and column.
|
|
|
Design of reinforced-concrete structures of the selected building
Jokel, Filip ; Zlámalová, Pavlína (referee) ; Kostiha, Vojtěch (advisor)
The bachelor's thesis deals with the design and assessment of the reinforced concrete structure of the selected object in two options for their execution. Part of the work, in the first option, is the design of a full reinforced concrete slab. The second possibility of the design of the structure is a slab, which is divided in half of the span by a T-section beam, which is supported by a column in the middle of its span. Creation of the model and analysis of internal forces is solved by the SCIA Engineer calculation program. The correctness of the model and results is verified by manual calculation. Part of the bachelor's work is also the drawing documentation of the solved elements.
|
|
|
Design of reinforced concrete floor structure
Velič, Marek ; Čairović, Dorde (referee) ; Kostiha, Vojtěch (advisor)
The bachelor thesis focuses on two construction designs on the 3rd floor. The first design is made of pre-stressed panels of SPIROLL type. The second design consists of a reinforced concrete continuous slab design with two bays, a beam, and a column. The internal forces for the design were obtained using SCIA Engineer. These internal forces were checked by hand calculation using the method of three-moment equations. Drawings for the above structures are included in the thesis. The design and assessment of the structures have been carried out as per the applicable standards.
|
|
|
Structural design of the gallery building
Ryšavý, Martin ; Kostiha, Vojtěch (referee) ; Švaříčková, Ivana (advisor)
The bachelor thesis deals with the design and the static assessment of a reinforced concrete floor slab above the first floor of a two-story gallery building. The aim of the work is to reinforce the ceiling slab, which is modelled in the student version of the Dlubal RFEM 5.30 program. The correctness of the output from the software is verified by a simplified manual method.
|
|
|
Design of concrete elements with FRP reinforcement
Mrkvová, Kateřina ; Lagiň, Juraj (referee) ; Kostiha, Vojtěch (advisor)
This diploma thesis focuses on deflection of reinforced concrete structures with FRP rebar. The thesis presents and compares various approaches on deflection of reinforced concrete structures with steel and FRP rebar based on national and international standards and existing research. The aim of the thesis is to point out differences among the various approaches and present the most suitable one for the particular case. Based on theoretical and experimental results, the goal is to modify one of the existing approaches or present a new method which would correspond with real deflection behaviour of FRP reinforced concrete beam. Simply supported beam with three-point bending was selected as a reference element. Analytical study and numerical analyses by ATENA software are performed. Results of analytical and numerical study are compared to experimental results.
|
|
|
Agricultural Building
Polák, Vojtěch ; Kostiha, Vojtěch (referee) ; Švaříčková, Ivana (advisor)
The final thesis´s is focused on deals with the design and price comparison of cast-in-place structure multipurpose agricultural hall in two variants. Specifically, it is a variant with structural longitudinal frame and a variant with a transversal saddle frame. The selected elements for the design are the beam, bracing, column, wall, slab and foundation strips. The creation of models and the acquisition of internal forces was done in the Dlubal RFEM program. The result is a price comparison of variants, formwork and reinforcement drawings.
|
guest ::
