|
|
Production of connector
Kočka, Jiří ; Rumíšek, Pavel (referee) ; Žák, Ladislav (advisor)
The diploma thesis deal with the proposal of connector manufacturing from bronze sheet CuSn6, thickness 1.5mm in production volume of 1.600.000 parts per year. From considered manufacturing variants there was chosen shearing and forming technology of thread in the progressive stamping die. For part production was selected pressing machine Bruderer 1250 with nominal pressing force 1250 kN from company E. Bruderer Maschinenfabrik AG. In the economical evaluation there were determined expenses 21.6 Kč per one piece including demanded profit. The turning point was calculated at production of 165.522 parts.
|
|
|
Manufacturing of connector
Kočka, Jiří ; Žák, Ladislav (referee) ; Podaný, Kamil (advisor)
The bachelor thesis deals with a concept of the production technology of the connector. It is made of CuSn6 bronze plate of width 0,25 mm, production batch of 1 200 000 pieces per year.There was performed a recherche based on the topic. Out of available technologies for the production were chosen cutting and forming in follow die. For the cutting of the bronze plate was chosen high-speed press machine Bruderer 18 with nominal pressing force of 180 kN made by E. BRUDERER Maschinenfabrik AG. The production costs per one piece were evaluated in the economic analysis including manufacturer profit and there was defined break-even point which occurs after production of 876 282 pieces.
|
|
|
Production of connector
Kočka, Jiří ; Rumíšek, Pavel (referee) ; Žák, Ladislav (advisor)
The diploma thesis deal with the proposal of connector manufacturing from bronze sheet CuSn6, thickness 1.5mm in production volume of 1.600.000 parts per year. From considered manufacturing variants there was chosen shearing and forming technology of thread in the progressive stamping die. For part production was selected pressing machine Bruderer 1250 with nominal pressing force 1250 kN from company E. Bruderer Maschinenfabrik AG. In the economical evaluation there were determined expenses 21.6 Kč per one piece including demanded profit. The turning point was calculated at production of 165.522 parts.
|
|
|
Manufacturing of connector
Kočka, Jiří ; Žák, Ladislav (referee) ; Podaný, Kamil (advisor)
The bachelor thesis deals with a concept of the production technology of the connector. It is made of CuSn6 bronze plate of width 0,25 mm, production batch of 1 200 000 pieces per year.There was performed a recherche based on the topic. Out of available technologies for the production were chosen cutting and forming in follow die. For the cutting of the bronze plate was chosen high-speed press machine Bruderer 18 with nominal pressing force of 180 kN made by E. BRUDERER Maschinenfabrik AG. The production costs per one piece were evaluated in the economic analysis including manufacturer profit and there was defined break-even point which occurs after production of 876 282 pieces.
|
guest ::
RSS feed.