|
|
Possibilities of educational MOOC courses
Kocháň, Matouš ; Hudák, Igor (referee) ; Lošák, Pavel (advisor)
The diploma thesis explores the possibilities of MOOC online courses and their implementation for ČSN EN 1591-4 standard. Firstly, Czech and global providers of MOOCs are discussed and compared. There are over 220 million MOOC active users globally. Then, the content of a course regarding the ČSN EN 1591-4 standard is created. This standard defines the necessary knowledge that mechanicians must acquire to install flange joints in critical applications. In the experiment, the importance of lubricating the fastener is pointed out. The outcome of the thesis is ten videos in Czech and in English that cover the courses' content and the experiment. The author entered a discussion with a Dutch Engineering Trainer platform which expressed interest in the ČSN EN 1591-4 course. In the end, the possibilities of course commercialization, fees, and profit are explored. There are several MOOC platforms open to publishing a course. Nevertheless, it is not possible to post the same course on two platforms simultaneously.
|
|
|
Utilization of pyrolysis for liquid fuels production
Hruška, Daniel ; Bělohradský, Petr (referee) ; Hudák, Igor (advisor)
The main content of this bachelor thesis is description of matters of the pyrolysis units. Whereas there is an emphasize on basic description of the function, methods and the chemical processes during pyrolysis reaction in the pyrolysis unit for waste tratment a biomass, comparisons of the advantages and disadvantages selected types of the pyrolysis unit and analyzing of the product gaining during pyrolysis. Thesis also present qualitative comparison of the pyrolysis products and the commonly used fuels. The last part of the thesis is bestowed to a simplyficated mathematical and chemical calculation for energetic efficiency of pyrolysis products and comonly used fuels.
|
|
|
Characteristic parameters of oxygen-enhanced combustion process
Dřímal, Jiří ; Hudák, Igor (referee) ; Bělohradský, Petr (advisor)
The thesis is focused on the experimental investigation of the oxygen enhanced combustion technology (OEC), which uses the combustion air with higher concentration of oxygen, i.e. more than 21 %. The OEC technology is used in those industrial applications, which requires higher thermal efficiency, increased productivity, improved character of the flame, reduced equipment cost, lower volume of exhaust gases and improved product quality. Although this technology involves a number of advantages, it is appropriate to mention some of its disadvantages such as refractory damage, inconsistent heating, increased pollutant emission or flame disturbance and/or flashback. The combustion tests of OEC were carried out at the burners testing facility that enables to test many types of burners (gaseous, liquid, or combined). The two-staged low-NOx burner fired by natural gas was used during the tests. The observed parameters include the effect of oxygen concentration in the combustion air on the NOx emissions, heat flux into the wall of the combustion chamber, in-flame temperature distribution in the horizontal symmetry plane of the combustion chamber and also the shape and dimensions of the flame. The combustion tests of the air-enrichment, air-oxy/fuel and O 2 lancing OEC methods were carried out at the burner thermal input of 750 kW and air excess of 1,1 for two combustion regimes, namely one-staged and two-staged fuel supply.
|
|
|
Biomass - a promising source of energy
Pauk, Marek ; Hudák, Igor (referee) ; Skryja, Pavel (advisor)
The thesis deals with possibility of exchanging gas boiler for biomass boiler for heating communal buildings. The goal is to count economic and environmental impacts of combusting biomass compared to combusting natural gas. The last two parts of the thesis proves that. The beginning of the thesis contains introduction of getting biomass for communal boiler room and suggests different boiler constructions. Then it divides types of biomasses and determines which are suitable for energy purposes specifically for combustion. The calculation part solves heating losses and necessary heat output for example buildings. Then the thesis suggests possible solutions of heating communal buildings. One of the solutions is communal boiler room with one boiler with 350 kW heat output, second solution is with two boilers with 200kW and 150kW heat outputs, last solution describes just exchange of old boilers for new ones that can combust biomass. Then all the solutions are compared for financial return, which is 6 years for both communal boiler rooms and around 13 years for solution that counts with exchanging boilers. It describes ecological impact of combustion of these two fuels. There it describes amount of emission of harmful substances during their combustion. At the end it explains carbon dioxide neutrality of biomass combustion. Biomass has several times higher emissions at the place of production during combustion then natural gas, but it is still more environmentally friendly.
|
|
|
Dosing of particulate matter in rotary driers and rotary kilns
Kubín, Pavel ; Hudák, Igor (referee) ; Bojanovský, Jiří (advisor)
The bachelor thesis is focused on particulate matter dosing into rotary dryers. In the theoretical part, the thesis focuses on the mechanical properties of particulate matter (PM), especially the flow properties. The method of determining these properties is also men-tioned. The following part deals with the currently used PM dosing methods. The basic methods of dosing are listed here and their combination can subsequently lead to a complex dosing system. The practical part contains two designs of sewage sludge dosing systems and a comparison of their advantages and disadvantages. It also lists the boundary conditions to be considered before starting the design of such a dosing device.
|
|
|
Possibilities of educational MOOC courses
Kocháň, Matouš ; Hudák, Igor (referee) ; Lošák, Pavel (advisor)
The diploma thesis explores the possibilities of MOOC online courses and their implementation for ČSN EN 1591-4 standard. Firstly, Czech and global providers of MOOCs are discussed and compared. There are over 220 million MOOC active users globally. Then, the content of a course regarding the ČSN EN 1591-4 standard is created. This standard defines the necessary knowledge that mechanicians must acquire to install flange joints in critical applications. In the experiment, the importance of lubricating the fastener is pointed out. The outcome of the thesis is ten videos in Czech and in English that cover the courses' content and the experiment. The author entered a discussion with a Dutch Engineering Trainer platform which expressed interest in the ČSN EN 1591-4 course. In the end, the possibilities of course commercialization, fees, and profit are explored. There are several MOOC platforms open to publishing a course. Nevertheless, it is not possible to post the same course on two platforms simultaneously.
|
|
|
The influence of the combustion air temperature on parameters of the combustion process
Šimeček, Radek ; Hudák, Igor (referee) ; Skryja, Pavel (advisor)
Tato diplomová práce se zabývá předehřevem spalovacího vzduchu a jeho vlivem na parametry spalovacího procesu. V teoretické části je zpracován přehled nejčastějších znečišťujících látek z průmyslového spalování. Je popsána aktuálně platná relevantní legislativa v Evropské unii a jsou porovnány její implementace do národní legislativy v České republice a v Německu. Dále je provedena klasifikace hořáků z hlediska různých kritérií a rešerše předchozí práce v oblasti předehřevu spalovacího vzduchu. Na zkušebně hořáků byla provedena experimentální studie dvou různých hořáků na zemní plyn při konstantním tepelném příkonu 750 kW se spalovacím vzduchem předehřátým až na 250 °C. Výsledky odhalily pozitivní vliv předehřevu na účinnost spalování. Množství emisí NOx a CO naopak rostlo s teplotou spalovacího vzduchu.
|
|
|
Utilization of pyrolysis for liquid fuels production
Hruška, Daniel ; Bělohradský, Petr (referee) ; Hudák, Igor (advisor)
The main content of this bachelor thesis is description of matters of the pyrolysis units. Whereas there is an emphasize on basic description of the function, methods and the chemical processes during pyrolysis reaction in the pyrolysis unit for waste tratment a biomass, comparisons of the advantages and disadvantages selected types of the pyrolysis unit and analyzing of the product gaining during pyrolysis. Thesis also present qualitative comparison of the pyrolysis products and the commonly used fuels. The last part of the thesis is bestowed to a simplyficated mathematical and chemical calculation for energetic efficiency of pyrolysis products and comonly used fuels.
|
|
|
Air enrichment with highly pure oxygen in combustion processes
Polášek, Kryštof ; Hudák, Igor (referee) ; Bělohradský, Petr (advisor)
This bachelor thesis deals with the oxygen enhanced combustion (OEC). The thesis describes different methods of enriching the combustion process with oxygen, also the advantages and disadvantages of enhancing the combustion are evaluated. The next part contains an overview of the use of OEC in specific industries. Since certain safety precautions must be taken when handling of oxygen, a separate chapter deals with the safety of oxygen enhanced combustion. In the last part of the thesis a simulation of the OEC process in ChemCAD software was carried out. The influence of oxygen concentration in the oxidizing agent on the flue gas volume, temperature, density and viscosity and the concentration of CO2 and H2O in the flue gas was investigated.
|
|
|
Rotary drying and sintering kilns
Rafaj, Svatomír ; Hudák, Igor (referee) ; Skryja, Pavel (advisor)
This thesis deals with rotary drying and sintering kilns. The first part focused upon construction of the kilns, kiln processes and the options of technological arrangement of the kilns. The thesis second part presents two experiments. The first one is targeted to find the relation between residence time, kiln rotary speed and kiln slope in longitudinal direction. The examinations analysed individually the relation between kiln rotary speed and residence time and the relation between kiln slope and residence time. Finally, the regression equation describing the relation between holding time, kiln rotary speed and kiln rake was established. The results given by regression equation much closer to the real one then the results given by literature. The difference between real residence time and the regression one is about one minute. The second one is concerned with producing a set of equations with respect of mass and heat balance in case of drying process. The input material was wet crushed tetra packs. There were established technological conditions of the material, necessary burner energy input, heat losses and distribution of heat between material and flue gas. There were taken away almost 80 percent of heat energy by flue gases. The remaining 20 percent was divided between latent heat, material and heat losses through the shell of the rotary kiln.
|
guest ::
RSS feed.