|
|
Design of headstock of the deburring machine
Tatíček, Jiří ; Holub, Michal (referee) ; Omes, Jiří (advisor)
The aim of this thesis is design of deburring machine, focusing on the headstock, capable of aligning the front side and chamfering at the round bars. At the beginning is a short research design nodes, used in the construction of machine tools. As part of the work was done and the measurement of cutting forces to determine the load while standing. Work also includes a series of calculations to justify the use of selected components. The outcome of the work is also a 3D model.
|
|
|
Design methodology for the selection of basic components of linear machine tool axes
Král, Stanislav ; Dosedla, Michal (referee) ; Holub, Michal (advisor)
The aim of the thesis is based on specified parameters positioning units, which include stroke (1m, 2m, 4m), load (5kg, 50kg, 500kg), you place the position accuracy (0.04 mm) and dynamic (maximum attainable speed 1.5 m / s), proposals to build a ball screw, linear motor, a toothed belt and toothed comb. For selected variants of positioning units to design a 3D model of positioning units. The proposed variations to compare and define their advantages / disadvantages, techno-economic comparison, the limit values of individual designs, etc. The work includes a search drive in positioning units, design units with toothed belt, a toothed comb, ball screw linear actuator, a calculated message of individual proposals then 3D design options for the ball screw and linear motor including drawings and assembly drawings.
|
|
|
Design of elongated right angle milling head for horizontal boring machine
Svoboda, Ondřej ; Tůma, Jiří (referee) ; Holub, Michal (advisor)
This thesis deals with design of right-angled elongated milling head for horizontal boring machine of FERMAT production. The thesis includes a detailed research of milling heads, a description of the head´s basic components and certain commercially available head´s comparison. Design part is describe components description and the design. Calculations are focused on determinating of forces generated during machining, setting of loading spectrum and the power load calculating individual gears during machining. In the next part is calculation of the reactions in the spindle bearings included, the equivalent load and durability of spindle bearings, spindle deformation and spindle bearings optimum distance. The thesis also includes spindle strength calculation, horizontal and vertical shafts analysis, gears design with helical teeth and gear strength. The thesis describes the design of extended milling head and particular design nodes which is supplemented by the 3D model. In this thesis is also included a drawing of assembly and components.
|
|
|
Design apparatus for measuring geometric accuracy of machine tools
Holcman, David ; Marek, Tomáš (referee) ; Holub, Michal (advisor)
This bachelor’s work deals with modern methods of geometric accuracy measurement of machine tools, modal analysis and definition of demands on used agents during the measurement process. A part of this work is dedicated to description of numerical finite element method, which is the cornerstone of ascertaining the natural frequencies by a software program. In the closing part the appropriate adjustments of minimisation of influence on measurement are suggested.
|
|
| |
|
|
Mat roll cutter
Šrámek, Michal ; Holub, Michal (referee) ; Foller, Bronislav (advisor)
The diploma thesis deals with the construction of a textile machine. More specifically, it deals with the construction of a vertical cutter of non-vowen fabrics that are made of polymerous fibres or fibre glass. The surface density of the material used ranges from 100 – 500 g/m2, the width of a role is 2000 mm and the weight is 150 kg. The machine is supposed to be designed in such a way so that the mat roles could be cut in any point.
|
|
|
Design of multi-functional machining centre
Cvejn, Jiří ; Holub, Michal (referee) ; Blecha, Petr (advisor)
The purpose of this diploma thesis is a design of frame, crossbar, transverse feed, sliding feed of multifunctional machining center. In the first part, there is a brief research of history of machine tool conducted, division of machining centers, materials for frame construction, alternatives of drives of sliding axis. Further, I carry out an analysis of parameters of compeeting machine tools, from which I selected the parameters of our machine. Frame project of the machine, propulsion of axis X and Y, kinematic connection of axis X,Y,Z. Frame of machine is analysed by Finite Element Method. Over the scope of this work I suggest a solution for covering of linear axis as well as their measuring of actual position. 3D model of frame and drives of machine are included in this work. A complete formation has been introduced into the immersive virtual reality environment.
|
|
|
Deployment of advanced compensation to the machine MCV 754 QUICK
Andrýsek, Jakub ; Vetiška, Jan (referee) ; Holub, Michal (advisor)
This work is focused on the software compensation of the geometric and volumetric errors. In the thesis there are descripted the measuring instruments suitable for measuring geometric and volumetric errors of the machine tool. In addition, there are described control systems and selected software compensations currently used in the machine tools. In the experimental part of the thesis there is briefly described the machining machine where the experiment was performed. Detailed procedures for using the used measuring instruments are also described. The aim of this thesis is to determine the influence of the size of the compensated volume on the geometric and volumetric precision of the machine tool.
|
|
| |
|
| |
guest ::
RSS feed.