|
|
Finding kinematic quantities of a mechanism and a structural analysis of its members after blockage
Zvozil, Ondrej ; Vosynek, Petr (referee) ; Fuis, Vladimír (advisor)
Diplomová práca, ktorá vznikla v spolupráci so spoločnosťou AUFEER DESIGN (AFD), sa zaoberá analýzou konkrétneho stieračového mechanizmu automobilu. Najprv je uvedená stručná história stieračov. Stieracie sústavy sú potom rozdelené podľa ich usporiadania a spôsobu pohonu. V nasledujúcej kapitole je formulovaná problémová situácia, problém a systém podstatných veličín. Kinematické veličiny kľúčových bodov mechanizmu sú určené analytickým aj numerickým prístupom. Výpočtový model pre kinematickú analýzu je vyvinutý v Matlabe a SimMechanics. Ďalšia časť je venovaná vytváraniu konečno-prvkového modelu v programe ANSA. Všetky deformačne-napäťové analýzy sú vykonané v programe Abaqus. Prvá z nich je parametrická štúdia, ktorá odhaľuje kritické polohy mechanizmu z hľadiska tlakového namáhania určitých súčastí. Mechanizmus v kritických polohách je potom zaťažovaný so zablokovanými ramenami stieračov. Nakoniec sú urobené lineárne analýzy straty vzpernej stability súčastí, u ktorých môže nastať, nasledované nelineárnymi analýzami so zahrnutými imperfekciami.
|
|
|
Failure probability of the ceramics part using Weibull weakest link theory
Kovář, Jaroslav ; Návrat, Tomáš (referee) ; Fuis, Vladimír (advisor)
This thesis compares Weibull weakest link theory with inclusion of one and all three principal stresses. Principal stresses needed for this theory were calculated with finite element method. The informational research is in the introduction of this thesis. It includes ceramic materials, Weibull weakest link theory, Gaussian quadrature over spherical surface and ceramic head of hip joint endoprothesis. Theoretical part is used for next calculations of probability of failure. The probability of failure of ceramic rod loaded by four-point bending is calculated in first calculations. This task is solved as contact in the next step. Next part of this thesis is about selection of suitable method of numerical integration. This method will be used in the calculation with all three principal stresses. The results of calculation with all three principal stresses are compared with the results of the calculation which includes only first principal stress. Firstly, this is done for cylindrical body and then used on head of hip joint endoprothesis. In the last part of this thesis, probability of fracture of head hip joint endoprothesis with shape deviation of nominal conicity is calculated.
|
|
|
Stress - strain analysis of total hip replacement - type Mayo
Rýdel, Jiří ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis deals with hip endoprothesis, primarily with endoprothesis conservative Mayo. A part of this paper considers a study aimed at an anatomy, types and modern trends in endoprothetic. On the basis of this study, gained CT data and the help of systems Ansys Workbench, Rhino Ceros and Catia there was made a model of proximal part of femur and TEP Conservative Mayo. A computational model was build up afterwards, which was used for a stress-train analysis.
|
|
|
Stress - strain analysis of jaw with tooth implant type MTI
Petrlíková, Helena ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma work is oriented on the deformation and load stress analysis of the jawbone with the razor-blade dental implant of the company MTI. There is a literature search on this theme in the beginning of this work. Deformation and tenseness of the system is done by computerized method FEM. There is detailed description of creating the computational model in this work. The geometry model of the system was created in the 3D CAD design software SolidWorks. Discretization, model of constrains and load sets including own solution was created in the ANSYS Workbench. On the basis of solutions with different load sets, which are presented in this work, is created a deformation and load stress analysis for two razorblade implant of copany MTI.
|
|
|
Stress - strain analysis of inferios limb with fixator type Poldi 7
Pásek, Jiří ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis deals with stress-strain analysis of inferious limb fixator type Poldi VII and tibia, whereupon is applied. In work is discribed creation of a geometry model of fixator and tibia, her discretization, loading and solving. Tibia was load by torsional moment and his magnitude was 10Nm. Then was perform a numerical solution in FEM system ANSYS Workbench 11.0. Further was effect biomechanical study about osification of broken part. Tibia was load by force, which evokes upright standing on both limbs.
|
|
|
Stress - strain analysis of jaw with tooth implant type VNI
Školník, Roman ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis is dealt with stress-strain analysis of jowl with teeth implants. Teeth implants when locked in place (jowl) have the ability to replace and be used in the same way as the missing teeth. The implant creates a pillar column in the buccal cavity and then the tooth cap or bridge is secured on the pillar column. In this diploma thesis it is described as a solution of stress and strain of two types of cylindrical teeth implants VNI. Thesis specializes on the influence of deviation implant from the vertical axis. The solution is accomplished in program ANSYS Workbench by Finite Element Method (FEM). The geometric models are made in program SolidWorks 2005.
|
|
|
Stress - strain analysis of inferios limb with fixator type Orthofix
Mrázek, Michal ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis aims to create a stress strain analysis of Orthofix external fixator applied to lower limb. The introduction summarizes the background research in available scientific publications, targetting the alternatives of treatment, namely application and fixation solutions of long bones. Furthermore parametric models of the fixator and tibia are created in CAD system CATIA. The fixator model enables to create different geometric variations simulating possible fixator settings and moment load in the range of 1-10 Nm. These geometric and loading states of fixator are solved via FEM in ANSYS. Single versions of the states of Orthofix fixator are then subjected to the stress strain analysis.
|
|
|
Stress - strain analysis of jaw with tooth implant type BOI
Marcián, Petr ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
Submitted master thesis deals with stress - strain analysis of jaw, with dental implant. The implant serve as a suitable pillar for crown or dental bridge, when one or more teeth are lost. The project is oriented on BOI (basale - oseo - integrable) dental implant type, which is produced by DENTALIHDE company. Stress – strain condition of the mandible system with implant have been established by computational simulation, with use of the final elements method. Important part of down jowl is simulated on with EDS and EDDS applied types of implants. After implementation the implant begins to heal. Therefore the special attention is paid to stress - strain states on various level of osteointegration. There is a detail description of production of single part computational model and his solving in the master thesis. Presentation of large chapter with results and subsequent alteration stress - strain analysis is part of the master thesis. Program SolidWorks 2005 was used to create the geometric model. Computational model and the actual solving was accomplished with use of ANSYS 11.0 and ANSYS Wor-kbench systems.
|
|
|
Stress - strain analysis of total hip replacement - type Santori
Huťka, Pavel ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
Submitted Diploma thesis deals with stress-strain analysis of deformation proximal end of femur with applied total hip joint endoprosthesis (replacement) – shortcut type. To identify deformation and tensity (stress) was used computational simulation by method of final elements. Have been created two computational models TEP- type Santori and type DePuy Proxima. Geometry model Santori was created on low level model geometry through the use of X-ray photograph. Principle of geometry model type DePuy Proxima was real Femoral stem endoprosthesis which was scanned on scanner ATOS. Geometry of both these replacements were set up in program Rhinoceros 4.0 and then execute in program CatiaV5R17. Data for geometry model of femur were gained from CT chains. Material model of femur have been crated in two variants. The first one looks at structure bone tissues and the second one were created by Gruen´s zones. Femoral Stem was weighted by static equivalent resultant force acting in hip joint. Computational model of system and self solution, including depiction results, was done by ANSYS Workbench 11.0 for four model variants.
|
|
|
Napjatostně deformační analýza železničního mostu v Brně Černovicích
Gago, Viliam ; Hrstka, Miroslav (referee) ; Fuis, Vladimír (advisor)
The main subject of this thesis is stress and strain analysis of railway bridge in Brno Černovice as a typical example of steel truss construction. First section represents a theoretical summary, which is necessary for the right solution of this task. Next part describes analytic model for finding attributes of static determinate and indeterminate type of two-dimensional truss structure and their comparison. Those results are verified by numerical solution based on finite element method. The last part describes a three-dimensional model and shows a comparison with planar solution.
|
guest ::
