|
|
Design Optimization Cost Model for Innovative Product
Dostálová, Tereza ; Baťka, Jiří (referee) ; Jurová, Marie (advisor)
Diploma thesis is focused on optimization cost model for innovative product in production plant in Brno, in business AŽD Praha s. r. o. Based on theoretical knowledge and analysis of the current costing model of the original product version and the innovated version of the product, the design part will be optimized the cost calculation model for the innovative product and it will be proposed controlling concept of cost calculation. Described proposal for optimizing the cost calculation model leads to an overall improvement of the cost management system in AŽD Praha s. r. o.
|
|
|
The new family house with hairdresser´s in Svitavy
Dostálová, Tereza ; Horálek, Jiří (referee) ; Benešová, Romana (advisor)
The subject of this bachelor’s thesis is the new family house with hairdresser´s in the Gorkého street in Svitavy. The house is located on flat land in the built-up area on the outskirts of the town. The building does not have a basement and has one floor and the attic. In the first floor there is a hairdresser´s, garage and entrance to the living area, in the attic there is designed four-room apartment. The building is made of constructional system Porotherm, the roof of the building is gabled with a dormer window in the living room. The facade is designed with an external thermal insulation composite system. Drawings are processed in ArchiCAD 14.
|
|
|
Bioactive substances for face cream: Determination of stability of face cream incorporated with goat's milk
Dostálová, Tereza ; Sovová, Šárka (referee) ; Enev, Vojtěch (advisor)
The aim of this bachelor thesis is a stability trial of a skin cream incorporated with goat milk lyophilizates prepared in usual laboratory conditions. Firstly, the goat milk was denatured, to be further analysed via FTIR, elemental analysis and thermogravimetry. To compare the denaturation effect, measurements with native goat milk sample were performed as well. Next, an emulsion was prepared. First stability tests were performed using analytical centrifuge and the cream preparation procedure and component ratio was optimized. Stability trials were carried out at specified time intervals. Rheological properties – especially yield stress values and structure strength, determined by linear viscoelastic region and complex modulus – thermal endurance measured via differential scanning calorimetry and visual validation via optical microscopy and sample observation were tested and performed. Skin cream stability of sample stored at laboratory temperature was demonstrated, showing moderate sings of structure destabilisation. Product suitability for dry skin was proved by sensory analysis. The skin feeling was pleasant, and the cream moisturized the surface area, that it was applied to, according to evaluators. Visually, the emulsion appeared to maintain its properties during the experiment time range, it did not undergo a complete degradation of separation into two original phases, nor it was degraded, for example by mold.
|
|
|
The flat - building in Svitavy
Dostálová, Tereza ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The subject of this diploma thesis is the new apartment house with business premises in the Riegrova street in Svitavy. The apartment house is located on flat land in the built-up area near the town centre. The building does not have a basement and has four floors. On the first floor there are a beauty and massage salon, a newsagent, a shoe shop, a maternal centre, entrances to the residential part and storage spaces belonging to the housing units. On the second, the third and the fourth floors there are housing units of different categories. The car park is situated outside the building. The building is made from constructional system Porotherm, the roof of the building is flat. The facade is designed with an external thermal insulation composite system. Drawings are processed in ArchiCAD 14.
|
|
|
Bioactive substances for face cream: Determination of stability of face cream incorporated with goat's milk
Dostálová, Tereza ; Sovová, Šárka (referee) ; Enev, Vojtěch (advisor)
The aim of this bachelor thesis is a stability trial of a skin cream incorporated with goat milk lyophilizates prepared in usual laboratory conditions. Firstly, the goat milk was denatured, to be further analysed via FTIR, elemental analysis and thermogravimetry. To compare the denaturation effect, measurements with native goat milk sample were performed as well. Next, an emulsion was prepared. First stability tests were performed using analytical centrifuge and the cream preparation procedure and component ratio was optimized. Stability trials were carried out at specified time intervals. Rheological properties – especially yield stress values and structure strength, determined by linear viscoelastic region and complex modulus – thermal endurance measured via differential scanning calorimetry and visual validation via optical microscopy and sample observation were tested and performed. Skin cream stability of sample stored at laboratory temperature was demonstrated, showing moderate sings of structure destabilisation. Product suitability for dry skin was proved by sensory analysis. The skin feeling was pleasant, and the cream moisturized the surface area, that it was applied to, according to evaluators. Visually, the emulsion appeared to maintain its properties during the experiment time range, it did not undergo a complete degradation of separation into two original phases, nor it was degraded, for example by mold.
|
|
|
Design Optimization Cost Model for Innovative Product
Dostálová, Tereza ; Baťka, Jiří (referee) ; Jurová, Marie (advisor)
Diploma thesis is focused on optimization cost model for innovative product in production plant in Brno, in business AŽD Praha s. r. o. Based on theoretical knowledge and analysis of the current costing model of the original product version and the innovated version of the product, the design part will be optimized the cost calculation model for the innovative product and it will be proposed controlling concept of cost calculation. Described proposal for optimizing the cost calculation model leads to an overall improvement of the cost management system in AŽD Praha s. r. o.
|
|
|
The flat - building in Svitavy
Dostálová, Tereza ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The subject of this diploma thesis is the new apartment house with business premises in the Riegrova street in Svitavy. The apartment house is located on flat land in the built-up area near the town centre. The building does not have a basement and has four floors. On the first floor there are a beauty and massage salon, a newsagent, a shoe shop, a maternal centre, entrances to the residential part and storage spaces belonging to the housing units. On the second, the third and the fourth floors there are housing units of different categories. The car park is situated outside the building. The building is made from constructional system Porotherm, the roof of the building is flat. The facade is designed with an external thermal insulation composite system. Drawings are processed in ArchiCAD 14.
|
|
|
The new family house with hairdresser´s in Svitavy
Dostálová, Tereza ; Horálek, Jiří (referee) ; Benešová, Romana (advisor)
The subject of this bachelor’s thesis is the new family house with hairdresser´s in the Gorkého street in Svitavy. The house is located on flat land in the built-up area on the outskirts of the town. The building does not have a basement and has one floor and the attic. In the first floor there is a hairdresser´s, garage and entrance to the living area, in the attic there is designed four-room apartment. The building is made of constructional system Porotherm, the roof of the building is gabled with a dormer window in the living room. The facade is designed with an external thermal insulation composite system. Drawings are processed in ArchiCAD 14.
|
|
| |
|
|
Řízení rizik v pojistné praxi
Dostálová, Tereza
The diploma thesis deals with the risk management in the insurance practice. The thesis is divided into two parts -- the literature review and the empirical part. In the first section are identified risks endangering the insurance company in their business activities. There are described arrangements risks prevention and elimination. There are also given the basic risks quantification methods. The thesis also describes the system of risk management in Solvency II directive. Basic processes, procedures and methods of the risk management in AXA insurance company are described in the empirical section. In addition is performed a quantification of risks of the selected insurer. Based on this quantification of risks and the risk management analysis, there are suggested further methods and arrangements which may lead to improved risk management for selected insurer.
|
guest ::
RSS feed.