National Repository of Grey Literature 53 records found  previous11 - 20nextend  jump to record: Search took 0.01 seconds. 
Civic amenities building
Čaplová, Michaela ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of my master ‘s thesis is to elaborate the project documentation of kindergarten as nearly zero – energy buildings. The project consists of three parts. The first part (main part) presents the civil engineering design of the building. Kindergarten is single storey-building. The vertical load-bearing structures are designed from lime-sand blocks (above - ground floor) and the hollow concrete blocks filled with C20/25. Horizontal load-bearing structures are designed from the prestressed Spiroll floor panels. The roof consists of a flat roof with extensive greenery. The second part presents technical equipment of buildings. The third part presents acoustic assesment outside Kindergarten. The building site contains also an outdoor playground. I am using AutoCad software for drawing and Deksoft to calculate Energy Performance Certificate. All structures comply with the regulations and valid standards.
Civic amenities building
Brázdová, Kateřina ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
Mixed-use building in Prostějov The aim of this master´s thesis is to elaborate the project documentation of a mixed-use building in Prostějov. The thesis consists of three parts: architectural-construction part, building services and elective part. The building has two above-ground floors. On the first floor there are storerooms, utility room, sanitary facilities and restaurant with kitchen and storerooms. The second floor is an office floor for one company which includes offices, dayroom, copyroom, meeting room and sanitary facilities. The building is founded on reinforced concrete foundation. The horizontal load-bearing and non-load-bearing structures are designed from ceramics blocks. The building is insulated by ETICS. The vertical load-bearing structures are designed from Spiroll slabs. The building has a green flat roof. There are parking spaces on the grounds. The building will be heated and cooled with a heat pump. It will also have an air condition. Part of electricity demand is covered by photovoltaics. In the third part of thesis, I replace frequently used materials with environmental ones in my project and compare them in terms of thermal engineering, acoustics and price. I used DEKSOFT, Hluk+, Autocad and Revit software. All structures comply with the valid standards and regulations.
Civic amenities building
Baroň, Alexandr ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The first part of this diploma thesis is to design an energy-efficient hotel with restaurant and car parking. The second part is also to create an assessment of the energy performance of the building and usage of energy from renewable sources. Hotel is designed with the idea of „smart buildings“ which means, that all the technological background is controlled by the main computer, which also harvests data to achieve a minimum energy use and financial demand and maximum comfort and safety at the same time by controlling the connected technology. By placing on a sloped terrain in the center of Brno, the basement floor can be used as car parking. The roof of this building is flat, green, with modifications for placing solar panels, whose design is part of this work. The third part of this diploma thesis is the spatial acoustics of the conference room on the first ground floor.
Civic amenities building
Matulíková, Monika ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of this master thesis is to design a new building of a nursing home with private garden and car park in Kroměříž. It is a two-storey building, without basement covered with a flat green roof with solar and photovoltaic panels. The building is divided in two parts. The southern part includes residential units (10 single units and 4 double units). The ground floor of the northern part includes dining room, a kitchen, staff premises and utility room and first floor includes further staff premises. Both parts are connected by a hall with stairs and an elevator. The vertical load-bearing structures are designed from sand-lime blocks. The horizontal load-bearing structures, stairway and elevator shaft are designed from cast-in-place reinforced concrete. The envelope is insulated with mineral wool. The building will be heated and cooled with a heat pump. It will also have a mechanical ventilation system with heat and cold recovery and root zone greywater treatment plant. The thesis is carried out in Autodesk Revit 2020, Autodesk AutoCAD, Lumion and DEKSOFT software. All structures comply with the valid standards and regulations.
Object of civic amenities
Zachovalová, Jana ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
Submitted diploma thesis prepares project documentation for the construction of a hotel building with a restaurant, which is located in the central built-up area of the town called Letovice situated in the South Moravian region. The solved building is partially basement with three above-ground floors covered by a flat vegetation roof. The hotel is designed with 23 accommodation units with a total capacity for 52 persons (including 4 persons with reduced mobility on the 2nd floor) and a restaurant for 98 guests, a bathroom and a kitchen. Guest rooms are located in the 2nd and 3rd floors. There are representative areas of the hotel in the form of an entrance hall with reception, areas for hotel management and a restaurant with a kitchen including social facilities for employees on the groud floor. There is a technical background of the building and maintance working room in the basement. The building comlies the requirement for low-energy standard buildings by combining a quality construction solution with thermal insulation of the building cover and other technological solitions. The overall character of the building is underlined by its architectural design in the form of partial greening of the facade. This solution is combined with large glazed areas giving a feeling of spaciousness and evocative cleanliness to the building.
Residential house in Žďár nad Sázavou
Frieb, Vilém ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
This bachelor thesis elaborates on the project documentation regarding construction of an apartment house in Žďár nad Sázavou, which is located in the Highlands Region. The apartment building has three residential floors accompanied by one basement, The building contains 10 housing units with common areas. The vertical loadbearing structures are built by ceramic brick technology with contact thermal insu-lation system. Horizontal structures are monolithic. The roof of the building is flat, covered by extensive greenery.
Apartment building
Buchtelová, Aneta ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
Contents of the bachelor´s thesis is a project of the elaboration of project documentation for the construction od an apartment building. I tis a building with five floors. The building has a total od 9 residencual units. ALl apartments have a balcony, terrace orlodgia. On the ground floo there is a barrier-free apartment, which has a separate main entrance and its own garden. There i salso common area on the ground floor with cellars a technical room, a meeting room, a chambers for placing tools for building mainterance, a cleaning room and a carriage hause with a bicycle shed. The last floor is designed as an esit to flat intensive roof and for 6 storage of equitment for uts mainterance. In front od the building is designed a total od 18 parking spaces, 2 of which are for people with limited mobility and orientation. The accesibilty of the building is desugned using paved surfaces and an elevator. The building is designed drom a two-way wallsystém made of ceramic blocks. The external vertical perimetr structures are insulated with the ETICS systém made of expanded polystyrene.
Object of civic amenities
Hasoň, Václav ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The diploma thesis elaborates on the design of a new building of freestanding retirement home in the town of Litomyšl. The design of the retirement home is in the form of project documentation for the construction. The new building includes a partial basement and three floors. The main purpose is to build a building for housing with flats for seniors and to provide health care to seniors living here and from the surrounding area. On the 1st floor, there is an administrative part, a doctor's office with the possibility of rehabilitation and a dining room with facilities for food preparation, which is imported into the home. The dining room serves both the guests and the public. The remaining part of the first floor consists of social, administrative and utility rooms. On the 2nd and 3rd floors, there are individual apartments for clients with a common room for visits and spending their free time. On the 1st floor, there is a maintenance center, boiler room, server room, furniture store, and estate depository. Basement walls are monolithic, made of reinforced concrete. The construction system of the above-ground floors is wall-mounted, bidirectional and made of ground brick blocks. The ceilings and staircases are monolithic, made of reinforced concrete. External walls are insulated with a contact thermal insulation systems. The building is mainly based on footings or foot anchors. The retirement home is located on the edge of the town near the Litomyšl Hospital. The land is suitable for construction, as it is located in the area for the construction of civil buildings.
A family house with an establishment
Popelka, Michal ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
This bachelor thesis is focused on design of family house with an establishment serving as financial consultancy. The object is located in cadastral area of Strání and has a partial basement with two above-ground floors. The house is established for four member family. External walls of the basement are bulit of permanent formwork. External walls of above-ground walls are bulit of clay blocks Porotherm 30 Profi with contact thermal insulation system ETICS. Horizontal load-bearing structures are formed by prefabricated rib-and-filler floor system MIAKO. Staircase is designed as two times bent slab. Part of the object is roofed with a warm flat roof, the other part with roof truss with roof slope of 35°.
Cultural-reference centre of Trenčín
Sládok, Marcel ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The title of this master´s thesis is the elaboration of a design for a newly builded building of civil importance - a cultural center. Object is 3 storey, situated on the flat plot in the wider center of Trencin. The center includes a concert hall and facilities for training and recording musical productions. The concert hall forms the left part of the building and consists of a stage, adjacent auditoriums with 352 seats, communication spaces and backgrounds for needs of performance. On the right side there are facilities for testing and recording of music with its own facilities, an entrance hall with a café and a seating area. The construction system consists of a monolithic vertical and horizontal RC structure, complemented in a concert hall with a beam ceiling. The roof is flat in 2 levels, the facade and the envelope of the building is a combination of glass facade and the ETICS insulation system, the highest part of the building is created by cetris tiles. Drawing part is drawn in AutoCAD, other programs used (eg to calculate physical properties of structures etc.) are DEKsoft, WDLS.

National Repository of Grey Literature : 53 records found   previous11 - 20nextend  jump to record:
See also: similar author names
5 BERKOVÁ, Pavla
3 BERKOVÁ, Petra
5 Berková, Pavla
4 Berková, Pavlína
Interested in being notified about new results for this query?
Subscribe to the RSS feed.