|
|
Residential building in Valašské Meziříčí
Pasztorek, Martin ; Woytela, Jindřich (referee) ; Benešová, Romana (advisor)
This Bachelor thesis deals with a design of new building – apartment house. Designed apartment house is located in Zlin region, in the town Valasske Mezirici. Altogether, the designed bulding contains partial basement, eight dwelling units and four storeys. In the ground floor we can find a storage cellar, utility room and cleaning room. The ground floor is made of 3 single sections – office section, section with access to dwelling units with the pram room and section with driving school. These sections are separated from each other and each section has its own entrance. Dwelling units are located on the second floor, third floor and fourth floor. The second floor is made of small flats – there are 3 studios and 1 one-room flat. Larger flats are located on the third and fourth floor where we can find 2 two-bedroom flats and 2 three-bedroom flats. Every dwelling unit has a disposal of the loggie except the flats on the fourth floor – these have a disposal of the terrace located on a flat green roof. Apartment house is built from clay block and overhang part is made of precast frame elements. Building foundations consist of foundation strips. The columns that are erecting the overhang part are placed on foundation pads. The basement wall is built from concrete blocks. Ceiling construction is made of prestressed ceiling panels Spiroll. Staircase is reinforced concrete precast. Roofing is solved by flat green roof. Thermal insulation of the building is solved by external contact insulation system that is internationally labeled and known as ETICS. As a thermal isolator serves the expanded polystyrene.
|
|
|
New building family house in Třebíč
Berková, Martina ; Ing.Radek Sedlák (referee) ; Benešová, Romana (advisor)
The subject of this Bachelor Thesis is a newly constructed family house located in Třebíč. The house was built using Porotherm brick – type blocks and Miako hollow ceiling bricks. The roof is of an gable design. The house has two overground floors – the second floor takes of a livable attic. The land is flat. All construction was done according to valid CSN code.
|
|
|
New building family house with shop
Janoušková, Dominika ; Horálek, Jiří (referee) ; Benešová, Romana (advisor)
Project new building family house with a shop in Prosetin. The building has a basement and two floors. The house is designed for four-five member family. The walls in the basement are formed by blocks BEST, the vertical construktion in floors are made of blocks Porotherm. The horizontal construktion is made of girders POT and the inserts MIAKO. The last ceiling is wooden. The roof structure consists of a wooden frame.
|
|
|
The building
Kříž, Lukáš ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The subject of the diploma thesis is to prepare project documentation for the construction of a multifunctional building with almost zero energy consumption. The multifunctional building is located in the South Moravian Region on the outskirts of Rosice. It is a five-storey detached multifunctional building in a slightly sloping terrain, with one underground floor and four above-ground floors. The underground floor serves for the most part as a collective garage and also for the technical background of the building. There is a gym and showroom on the first floor. On the second and third floors there are office spaces with the necessary facilities. The remaining fourth floors are used for living, there are designed four residential units, with storage space for each apartment. The building is designed as a combined construction system, while the perimeter vertical load-bearing structures are lined with ceramic hollow blocks. The perimeter load-bearing walls in the basement are made of lost formwork. The vertical load-bearing structures inside the building consist mainly of reinforced concrete monolithic columns. The ceiling structures and longitudinal girders are also monolithic reinforced concrete. The perimeter masonry is insulated with the ETICS contact thermal insulation system. The building is based on reinforced concrete monolithic foundation strips. The roof consists of a flat single-skin vegetation roof.
|
|
|
New build of shopping center
Novotná, Aneta ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
This thesis is decribing documentation of brand new shopping center building at the terms of project specification for the building permit. There are requirements set to the draft for the layout of the building in connection with ensuring construction in terms of static, thermal technical, fire safety, energy saving and safety in usage. The project is created in software AutoCad, the calculation for the assessment of thermal properties is created in the software Teplo a Ztráty. Calculation for the fire safety and static calculation of reinforced concrete panel is processed by manual calculation.
|
|
|
The family house
Moudrá, Aneta ; Janíček, Vít (referee) ; Benešová, Romana (advisor)
The subject of presented thesis is preliminary design of a detached house with workshop, as a design documentation for future building construction. The building is located on sloping land in the village Litohrady and consists of a basement and one above ground floor. The workshop is located on the ground floor. Roofing is solved by warm flat roof construction with an inverted roof assembly. Vertical structure and horizontal load-bearing structures are made out of Ytong system, perimeter masonry of the basement floor is made out of concrete blocks of permanent formwork Best. Construction of the house is based on footings. The main entrance to the house is designed to be in the basement, workshop has its own separate entrance on the ground floor. In the basement there is a living area and utility room with double car garage. The ground floor of the house holds a private zone and workshop. Proposal for the house construction emphasizes the layout design, architectural and construction solutions to energy savings and safety in use.
|
|
|
Kindergarten, Uhřice
Ždánský, Adam ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The subject of this thesis is design of a new kindergarten for 36 children in the village Uhřice near Kyjov. The design is made in level of detailed design. The designed building is a partial basement, two-storey building of elongated shape. The facade of the building is designed as ventilated with wooden cladding, the northern part of the building is with contact thermal insulation system. The building has two single-layer flat roofs, one with a vegetation layer, the other with a PVC roofing with an attic. Entrance to object is from south side. On the first floor there are two separate departments for education of children with facilities and there is a technical-economic background in third part. On the second floor there are special classrooms that can be used by both the kindergarten and the adjacent elementary school, as well as the public. There is also a central office, a meeting room and a special speech therapy room. On the underground floor there are warehouses and technological facilities. Static scheme of the building consists is combined system of ceramic blocks and reinforced concrete columns with girders, in the basement is used reinforced concrete walls. The ceilings are designed from prestressed spiroll panels. Park landscaping was designed on the surrounding site. The purpose of the object is in the concept of preschool education. The concept is based on children acquiring the fundamentals of key qualities from outset and acquiring prerequisites for their lifelong learning.
|
|
|
New building family house with shop, Brno- Řečkovice
Passinger, Pavel ; Ing.Radek Sedlák (referee) ; Benešová, Romana (advisor)
The theme of the thesis is to elaborate a comprehensive documentation of new building family house with shop at the project specification for a building permit. On the proposal is subject to the requirements of the layout of the building in connection with securing the construction site, static, thermal equipment and fire safety, protection against noise, energy saving and safety in use. A separate project is drawn in AutoCAD and calculations for assessment are processed by hand calculation.
|
|
|
Kindergarten, Uničov
Ondráček, Tomáš ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
This diploma thesis deals with the design of the kindergarten in Uničov. The object is designed as a two-storey, non-cellar basement. Because of the almost perfectly flat terrain and purpose of the building, the basement would be unnecessary. The gentle slope which the selected plot shows is oriented to the southeast side. The main entrance to the house is solved from the western side, along the direction of the main entrance to the nursery. It is adjacent to the existing communication with the parking lot towards the Nemocniční housing estate. There are two separate children's wards at the 1st floor, always equipped with a spacious playroom, dressing rooms and a washroom. Furthermore, in the 1st floor there is a large part of the economic zone consisting of a kitchen and related space, a junior flat and a cookery facility. The 2nd floor is reserved for the all-round development of children, both directly attending kindergarten and outside of the interest groups. Therefore, there are spaces such as a language classroom, a workshop room and a hall for other external staff. In addition, there is also a facility for staff and external staff in the form of a meeting room. The east side of the 2nd floor is then reserved for the third children's ward, the backrest consisting of a playroom, dressing rooms, washrooms along with a toilet and, moreover, a lounger. The vertical supporting structures are designed from porous concrete blocks, reinforced concrete and pillar blocks. The ceiling in each level is designed as a reinforced concrete reinforced concrete slab. The building is roofed with a flat single-roofed roof with a slope of 2 %.
|
|
|
New building family house
Rizner, David ; Slávik, Richard (referee) ; Benešová, Romana (advisor)
The aim of this thesis is to design a new building of an above standard family house. The object is placed in a slightly steep land. The object contains a cellar as well as two above-ground floors, and is flat roofed. The house is situated is the locality of Lažánky near Blansko. This project focuses on layout plan, static and architectonic plan and further on energy saving and safety in usage. The main building system is VELOX.
|
guest ::
RSS feed.