National Repository of Grey Literature 13 records found  1 - 10next  jump to record: Search took 0.00 seconds. 
Experimental evaluation of strain fields in the vicinity of V-notch in ductile metal
Jandejsek, Ivan ; Jiroušek, Ondřej ; Vavřík, Daniel
This work deals with the experimental measurement of full-field displacements and strains evaluation on the surface of flat high-ductile aluminum specimens in the vicinity of the V-notch during loading. Two different specimen geometry configurations, boundary and middle notch, are tested and compared in terms of deformation constraint. The enhanced Digital Image Correlation method in conjunction with strain gage measurement is employed for the precise full-field strain evaluation.
Time-discrete integration of finite deformations
Fiala, Zdeněk
Some necessary implications for the time discrete integration of finite deformations will be discussed together with particular Runge--Kutta--Munthe-Kaas schemes, when the geometrical structure of the space of Cauchy-Green deformation tensors, implicitly contained in the principle of virtual power, is taken into account.
Experimental measurement of full-field strains in the vicinity of U-notch in ductile material
Jandejsek, Ivan ; Jiroušek, Ondřej ; Vavřík, Daniel
The paper deals with the measurement of full-field displacements and strains evolution in the vicinity of the U-notch in the flat high-ductile aluminum specimen during its loading. The full-field displacements are measured using Digital Image Correlation method in a set of vertices of a triangular mesh reflecting the presence of the stress concentrator. From the known displacements strain distribution is computed. The resulting strain field is compared with simultaneous strain gauge measurement. These strain gauges are located just in a few well-defined positions and serve for correction of a systematical error caused by rigid-body motion of the specimen during loading. The experimental results are used as referential for Finite Element simulation using the same triangular mesh.
Experimental Methods for Evaluation of the Energy Balance in Vicinity of the Crack Tip
Jandejsek, Ivan ; Vavřík, Daniel
This work deals with experimental methodology for comprehensive observation in vicinity of stress concentrator in the high ductile material for the purpose of evaluation of the overall energy balance. The strain and stress fields, level of plasticity and thermal dissipation at the vicinity of the stress concentrator are determined employing combination of simultaneous optical, strain gauge and thermal measurement.
Identification of material parameters of an orthotropic metal sheet
Vavřík, Daniel ; Fiala, Zdeněk ; Grediac, M. ; Jandejsek, Ivan ; Micka, Michal ; Minster, Jiří ; Pierron, F.
Identification of constitutive equation parameters of orthotropic specimens is a highly demanding task requiring a full field measurement of the strain fields. This measurement is done using a Digital Image Correlation technique. The material parameters are identified by employing the Finite Element Method Updating and the Virtual Field Method alternatively.
Optimization and Calibration of Digital Image Correlation Method
Jandejsek, Ivan ; Valach, Jaroslav ; Vavřík, Daniel
An example of instrumentation and optimization of Digital Image Correlation measurement system for given class of experiments is described in this paper.
Logarithmic strain in 1 versus 3(2) dimensions
Fiala, Zdeněk
The paper discusses the logarithmic strain in one dimension (1D) from the geometrical point of view to highlight the nature of problems when generalizing it to more dimensions (3D or 2D).
Experimentální měření J integrálu
Vavřík, Daniel ; Jandejsek, Ivan
Experimental measurement of the J integral on the thin planar specimen is presented. It is possible measure J integral directly as curve integral as it is defined. This approach is not as comfortable as standard measurement on CT specimen but is more appropriate for thin planar specimens.
Srovnání pole přetvoření CT vzorku určeného MKP a termoplastickým měřením
Žďárský, M. ; Valach, Jaroslav
The aim of this paper is to present a study comparing plastic deformation of CT specimen by observed means of thermography and obtained by FEM calculation. The study is intended to be the first step in the investigation of evolution of plastic deformation of thin-walled structures in the vicinity of cracks.
Použití metody digitální korelace obrazů ve studiu tvarů stěn vysokých nosníků v pokročilé fázi únavových zkoušek
Jahoda, J. ; Valach, Jaroslav
The paper presents implementation of the digital image correlation method and its application into in-plane deformation measurement, investigation of the shapes of the buckled wall of fatigued steel girders.

National Repository of Grey Literature : 13 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.